MGA-31289 AVAGO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 13
Technical content
Features
- ROHS compliant
- Halogen free
- High linearity at low DC bias power (1)
- High Gain
- Good gain flatness
- Low noise figure
- Excellent uniformity in product specification
- SOT-89 standard package Specifications At 1.9GHz, Vd = 5V, Id = 124mA (typ) @ 25°C
- OIP3 = 41.8dBm
- Noise Figure = 2dB
- Gain = 18.70dB; Gain Flatness (+/-50MHz) = 0.1dB
- P1dB = 23.6dBm
- IRL = 16.2dB, ORL = 10.3dB Note: 1. The MGA-31289 has a good LFOM of 14dB. Linearity Figure of Merit (LFOM) is essentially OIP3 divided by DC bias power.
Figure 1. Simplified Schematic diagram
Symbol Parameter Units Absolute Maximum Id,max Drain Current mA 165 Vd,max Device Voltage V 5.5 Pd Power Dissipation (2) mW 907.5 Pin CW RF Input Power dBm 25 Tj Junction Temperature °C 150 Tstg Storage Temperature °C -65 to 150 Thermal Resistance Thermal Resistance [3] (Vd = 5.0V, Tc = 85°C) θjc = 50°C/W Notes: 1. Operation of this device in excess of any of these limits may cause permanent damage. 2. This is limited by maximum Vd and Id. Board temperature (TC) is 25°C. For TC >104°C, derate the device power at 20mW per °C rise in board temperature adjacent to package bottom. 3. Thermal resistance measured using Infra-Red Microscopy Technique. TA = 25°C, Vd = 5V, unless noted Symbol Parameter and Test Condition Frequency Units Min. Typ. Max. Ids Quiescent current N/A mA 101 124 143 NF Noise Figure 1.9GHz 2.5GHz dB – 2 2.45 Gain Gain 1.9GHz 2.5GHz dB 17 18.7 17.7 OIP3 [2] Output Third Order Intercept Point 1.9GHz 2.5GHz dBm 38.2 41.8 41.5 P1dB Output Power at 1dB Gain Compression 1.9GHz 2.5GHz dBm 21.8 23.6 23.7 PAE Power Added Efficiency at P1dB 1.9GHz 2.5GHz % – 36.4 34.8 IRL Input Return Loss 1.9GHz 2.5GHz dB – 16.2 15.5 ORL Output Return Loss 1.9GHz 2.5GHz dB – 10.3 10.8 ISOL Isolation 1.9GHz 2.5GHz dB – 27.3 27.7 Notes: 1. Typical performance obtained from a test circuit described in Figure 25. 2. OIP3 test condition: F1 - F2 = 10MHz, with input power of -10dBm per tone measured at worst case side band.
MGA-31289 Typical Scatter Parameters (1) TA = 25°C, Vd = 5.0V, Id = 124mA, Zo = 50W Freq GHz S11 S11 S11 S21 S21 S21 S12 S12 S12 S22 S22 S22
MGA-31289 K-Factor (1) TA = 25°C, Vd = 5.0V, Id = 124mA, Zo = 50W MGA-31289 Typical Noise Parameters (1) TA = 25°C, Vd = 5.0V, Id = 124mA, Zo = 50W Freq (GHz) Fmin (dB) Γopt Mag Γopt Ang Rn/Z0 Ga (dB) 4 3.13 0.557 -159 0.14 17.11 Note: 1. Measurements are made on 10mils Rogers RO4350 TRL Board. 0.00 1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00 10.00 Frequency (GHz) K Factor K Factor
Part Number Ordering Information Part Number No. of Devices Container MGA-31289-BLKG 100 Antistatic Bag MGA-31289-TR1G 3000 13” Tape/Reel Dimensions in mm Dimensions in inches Symbols Minimum Nominal Maximum Minimum Nominal Maximum E 3.94 - 4.25 0.155 - 0.167 MATTE FINISH POLISH POLISH D E L b e e1S C b1 b A OR 1.24 1.23 0.77
0.2 HALF ETCHING
1.625 2.35 DEPTH 0.100 E D E L e e1S OR
NOTES: 1. 10 SPROCKET HOLE PITCH CUMULATIVE TOLERANCE ±0.2 2. CAMBER IN COMPLIANCE WITH EIA 481 3. POCKET POSITION RELATIVE TO SPROCKET HOLE MEASURED AS TRUE POSITION OF POCKET, NOT POCKET HOLE 12.0 ± .3 Ao = 4.60 Bo = 4.90 Ko = 1.90 5.50 ± .05 SEE NOTE 3 1.75 ± .10 8.00 Ø 1.5 +0.1/-0.0 2.00 ± .05 SEE NOTE 3
4.00 SEE NOTE 1
Ø 1.50 MIN. Ao Ko R 0.3 TYP . R 0.3 MAX. 0.30 ± .05 A A Bo USER FEED DIRECTION COVER TAPE CARRIER TAPE REEL 12X 12X 12X 12X
For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2013 Avago Technologies. All rights reserved. AV02-2533EN - May 23, 2013 Reel Dimensions – 13” Reel Ø 20.2 M IN 2.0 ± 0.5 Ø 13.0 +0.5 -0.2 102.0 REF 330.0 REF 8.4(MEASURED AT HUB) (MEASURED AT HUB) "A" ATTENTION Electrostatic Sensitive Devices Safe Handling Required MINNEAPOLIS USA U.S PAT 4726534 R LOKREEL R 11.1 MAX. Detail "A" Detail "B" PS PS 1.5
88 REF
96.5 +0.3 - 0.2 Dimensions in mm