MGA-30989 AVAGO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 13

Technical content

Features

  • High linearity
  • Built in temperature compensated internal bias circuitry
  • No RF matching components required
  • GaAs E-pHEMT Technology[1]
  • Standard SOT89 package
  • Single, Fixed 5V supply
  • Excellent uniformity in product specifications
  • MSL-1 and Lead-free halogen free
  • High MTTF for base station application Specifications 3.5GHz, 5V, 51mA (typical)
  • 12 dB Gain
  • 36.8 dBm Output IP3
  • 2 dB Noise Figure
  • 23.6 dBm Output Power at 1dB gain compression 5GHz, 5V, 51mA (typical)
  • 9.6 dB Gain
  • 38.4 dBm Output IP3
  • 1.65 dB Noise Figure
  • 23.8 dBm Output Power at 1dB gain compression

Applications

  • IF amplifier, RF driver amplifier
  • General purpose gain block Note: 1. Enhancement mode technology employs positive gate voltage, thereby eliminating the need of negative gate voltage associated with conventional depletion mode devices. 9GX Top View RFin GND RFout #1 #2 #3 Bottom View RFout GND RFin #3 #2 #1 MGA-30989 2 - 6GHz, High Linearity Gain Block Data Sheet

Electrical Specifications [1] TA = 25°C, Vdd = 5V Symbol Parameter and Test Condition Frequency Units Min. Typ. Max. Ids Quiescent current N/A mA 42 51 66 Gain Gain 3.5 GHz

5 GHz

8.5 9.6 10.5 OIP3 [2] Output Third Order Intercept Point 3.5 GHz 36.8 38.4 – NF Noise Figure 3.5 GHz 1.65 2.1 S11 Input Return Loss, 50Ω source 3.5 GHz -16 S22 Output Return Loss, 50Ω load 3.5 GHz -15 S12 Reverse Isolation 3.5 GHz -18 OP1dB Output Power at 1dB Gain Compression 3.5 GHz 23.8 – Notes: 1. Measurements obtained using demo board described in Figure 22 and 23. Both 3.5GHz and 5GHz data were taken with 3GHz - 6GHz Application Test Circuits. 2. OIP3 test condition: FRF1 - FRF2 = 10MHz with input power of -10dBm per tone measured at worse side band. 3. Use proper bias, heat sink and de-rating to ensure maximum channel temperature is not exceeded. See absolute maximum ratings and application note (if applicable) for more details.

Table 1. 2GHz - 4GHz Application Schematic Components Table 2. 3GHz - 6GHz Application Schematic Components Figure 24. S-parameter and Noise parameter test circuit

Typical S-Parameter (Vdd = 5V, TA = 25°C, 50 ohm) Freq (GHz) S11 (dB) S11 (ang) S21 (dB) S21 (ang) S12 (dB) S12 (ang) S22 (dB) S22 (ang)

Part Number Ordering Information Part Number No. of Devices Container MGA-30989-BLKG 100 Antistatic Bag MGA-30989-TR1G 3000 13” Tape/Reel Typical Noise Parameters (Vdd = 5V, TA = 25°C, 50 ohm) Freq (GHz) Fmin (dB) Γopt Mag Γopt Ang Rn/Z0 2.0 2.95 0.086 49 0.52 2.5 2.32 0.12 90 0.29 3.0 1.83 0.15 122 0.19 3.5 1.54 0.18 174 0.18 4.0 1.53 0.22 -145 0.17 4.5 1.61 0.24 -103 0.21 5.0 1.78 0.27 -62 0.22 5.5 2.05 0.30 -35 0.32

Dimensions in mm Dimensions in inches Symbols Minimum Nominal Maximum Minimum Nominal Maximum E 3.94 - 4.25 0.155 - 0.167 MATTE FINISH POLISH POLISH D E L b e e1S C b1 b A OR 1.24 1.23 0.77

0.2 HALF ETCHING

1.625 2.35 DEPTH 0.100 E D E L e e1S OR

NOTES: 1. 10 SPROCKET HOLE PITCH CUMULATIVE TOLERANCE ±0.2 2. CAMBER IN COMPLIANCE WITH EIA 481 3. POCKET POSITION RELATIVE TO SPROCKET HOLE MEASURED AS TRUE POSITION OF POCKET, NOT POCKET HOLE 12.0 ± .3 Ao = 4.60 Bo = 4.90 Ko = 1.90 5.50 ± .05 SEE NOTE 3 1.75 ± .10 8.00 Ø 1.5 +0.1/-0.0 2.00 ± .05 SEE NOTE 3

4.00 SEE NOTE 1

Ø 1.50 MIN. Ao Ko R 0.3 TYP . R 0.3 MAX. 0.30 ± .05 A A Bo USER FEED DIRECTION COVER TAPE CARRIER TAPE REEL 9GX 9GX 9GX 9GX

For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2013 Avago Technologies. All rights reserved. AV02-2251EN - May 23, 2013 Reel Dimensions – 13” Reel Ø 20.2 M IN 2.0 ± 0.5 Ø 13.0 +0.5 -0.2 102.0 REF 330.0 REF 8.4(MEASURED AT HUB) (MEASURED AT HUB) "A" ATTENTION Electrostatic Sensitive Devices Safe Handling Required MINNEAPOLIS USA U.S PAT 4726534 R LOKREEL R 11.1 MAX. Detail "A" Detail "B" PS PS 1.5

88 REF

96.5 +0.3 - 0.2 Dimensions in mm