ALM-32320 AVAGO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

Features

  • Fully matched, input and output
  • High linearity and P1dB
  • Unconditionally stable across load condition
  • Built-in adjustable temperature compensated internal bias circuitry
  • GaAs E-pHEMT Technology[1]
  • 5V supply
  • Excellent uniformity in product specifications
  • Tape-and-Reel packaging option available
  • MSL-3 and Lead-free
  • High MTTF for base station application Specifications 3.5GHz; 5V, 810mA (typical)
  • 12.6 dB Gain
  • 51.0 dBm Output IP3
  • 34.5 dBm Output Power at 1dB Gain Compression
  • 46.6% PAE at P1dB
  • 2.5dB Noise Figure

Applications

  • Class A driver amplifier for WiMAX base stations.
  • General purpose gain block. Note: 1. Enhancement mode technology employs positive gate voltage, thereby eliminating the need of negative gate voltage associated with conventional depletion mode devices. Attention: Observe precautions for handling electrostatic sensitive devices. ESD Machine Model = 80 V ESD Human Body Model = 800 V Refer to Avago Application Note A004R: Electrostatic Discharge, Damage and Control.

Electrical Specifications [7] TA = 25 *C, Vdd =5V, Vctrl =5V, RF performance at 3.5GHz, measured on demo board (see Figure 7) unless otherwise specified. Symbol Parameter and Test Condition Units Min. Typ. Max. Ids Quiescent current mA 690 810 910 Ictrl Vctrl current mA - 28 - Gain Gain dB 11.2 12.6 14.2 OIP3 [8] Output Third Order Intercept Point dBm 48.0 51.0 - OP1dB Output Power at 1dB Gain Compression dBm 33.0 34.5 - PAE Power Added Efficiency % - 46.6 - NF Noise Figure dB - 2.5 - S11 Input Return Loss, 50Ω source dB - -9.0 - S22 Output Return Loss, 50Ω load dB - -12.0 - S12 Reverse Isolation dB - -26.5 - Notes: 7. Measurements at 3.5GHz obtained using demo board described in Figure 6 and 7. 8. OIP3 test condition: FRF1 - FRF2 = 10MHz with input power of -5dBm per tone measured at worst side band 9. Use proper biasing, heat sink and de-rating to ensure maximum channel temperature is not exceeded. See absolute maximum ratings and application note (if applicable) for more details.

S-Parameter [1] (Vdd = 5V, Vctrl = 5V, T = 25ºC, matched 50Ω) Freq (GHz) S11 (dB) S11 (ang) S21 (dB) S21 (ang) S12 (dB) S12 (ang) S22 (dB) S22 (ang) Notes: 1. S-parameter is measured with reference plane at SMA end launch using demo board shown in Figure 7. 3. Demo board SMA end launch is Johnson 142-0701-851.

3.64 0.99 0.81 1.080.811.26 3.96 3.03 0.81 0.70 0.60 ∅0.30 0.90 C'fer 0.3X45° 0.90 0.30 0.30 4.05 4.05 1.100.30 1.20 1.40 0.30 0.90 0.70 3.64 0.99 0.81 1.080.811.26 3.96 3.03 0.81 PCB Layout and Stencil Design PCB Land Pattern (Top Vie) Stencil Outline Combined PCB and stencil layout Land Pattern (Top Vie) Part Number Ordering Information Part Number No. of Devices Container ALM-32320-TR1G 1000 13” Reel ALM-32320-TR2G 3000 13” Reel ALM-32320-BLKG 100 antistatic bag Product Family Output Frequency Band Poer 700MHz-1GHz 1.7-2.7GHz 3.3-3.9GHz 0.5W MGA-30116 MGA-30216 MGA-30316 1W ALM-31122 ALM-31222 ALM-31322 2W ALM-32120 ALM-32220 ALM-32320 Note: All dimensions are in millimeters.

7.00±0.10 10.00±0.10 Pin 1 identification 5.00 0.10 (All corner) 5.00 (2x) 0.90 (2x) 1.10 (4x) 1.20 (2x) 1.40 2.90 (4x) 0.90Sq 0.07 (Gaps between SM and metal) 0.16 (SM width) (6x) 1.20 0.10 2.05 Pin 1 1.05±0.10 0.60 C'fer 0.3X45° 32320 WWYY XXXX MCOB 7 x 10 Package Dimensions Top Vie Side Vie Bottom Vie Notes: 1. All dimensions are in milimeters 2. Dimensions are inclusive of plating 3. Dimensions are exclusive of mold flash and metal burr

12.00 ± .10 [.472 ± .004] 4.00 ± .10 [.157 ± .004] 1.50 + .10 [.059 + .004] 2.00 ± .10 [.079 ± .004] 1.75 ± .10 [.069 ± .004] 11.50 ± .10 [.453 ± .004] 24.00 + .30 − .10 1.50 + .25 [.059 + .010] .330 ± .013 [.0130 ± .0005] 7.11 ± .10 [.280 ± .004] 1.52 ± .10 [.060 ± .004] 10.08 ± .10 [.397 ± .004] A. K. B. MM [INCH] 8˚ MAX 7˚ MAX Device Orientation USER FEED DIRECTION TOP VIEW END VIEWUSER FEED DIRECTION COVER TAPE CARRIER TAPE REEL 32320 WWYY XXXX 32320 WWYY XXXX 32320 WWYY XXXX

For product information and a complete list of distributors, please go to our web site: .avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2008 Avago Technologies. All rights reserved. AV02-1350EN - August 26, 2008 Reel Dimensions - 13” Reel Detail ‘X’ Recycle Symbol See Detail ‘X’ Embossed Line X2 90.0mm Length Lines 147.0mm away from center point ESD Label (See Below) FRONT BACK Detail ‘Y’ (Slot Hole) FRONT VIEW BACK VIEW Recycle Symbol Embossed ‘M’ 5.0mm Height Slot 10.0±0.5(2x) Slot 5.0±0.5***(1x) Detail ‘Y’ 30.4* Max Ø100.0±0.5 Ø331.5 Max 1.0 4.0 Detail ‘X’ +0.5 2.2±0.5 Ø20.2 (Min) Ø13.1 -0.2 25.4±1.0* 25.65±1.75**