MEM2080 GCT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
1.9 ref. (Push In Position) 2.8 ref. (Push Lock Position) 6.2 ref. (Push Out Position) 5.70 13.06 3.15 14.03 8x 0.30 pitch1.10 0.93±0.10 11.16+0.10 -0.05 0.25 0.10 1.28 0.7011.22 13.33 1.43±0.05 0.66 11.73 12.93 2x 2.73±0.05 2.40±0.05 2x 2.93 2x 0.400.50±0.05 0.60±0.05 2.40
1.10 Pitch
8x 0.40±0.05 4.19 0.08 DSW2 0.46 Locating Post 00 = Without Packing Options A = Tape & Reel Switch 00 = Normally Open MEM2080 Ordering Grid 12800A 00 Specifications Material Housing&Slider: LCP, UL94V-0, Black Terminal: Phosphor Bronze, T=0.15mm Shell: Stainless Steel, T=0.10mm Coil Spring: SWP Latch: Stainless Steel Plating Contact Terminal: Under-plating: 80µ" min. Nickel all over Contact Area: Gold Flash Soldering Area: Gold Flash Metallic Shell : Under-plating : 50µ" Nickel all over Soldering Area : Gold Flash Coil Spring&Latch: Clear Electrical Voltage Rating: 12V AC/DC max. Current Rating: 0.5A AC/DC max. Contact Resistance: 100mΩ max. Insulating Resistance: 1000MΩ min. at 500V DC Dielectric Withstand Voltage: 500V AC Mechanical & Environmental Durability: 5000 Cycles Operating Temperature: -25°C to +85°C Request Samples and Quotation A B C D E F G H 678 C 3rd Angle Projection Units: Metric (mm) Tolerances (Except as Noted) Length Angle Product Description This drawing is confidential and copyright of Global Connector Technology, Ltd (GCT). This drawing must not be copied or disclosed without written consent. E & OE Not to Scale Drawn By CC Sheet No. MEM2080Micro SD Memory Card Connector Push-Push, SMT, 1.28mm Profile CC Drawing Release By Detail Revision Part Number Drawing Date 13th December 2021 24/11/22 Date X.X ±0.35 X.XX ±0.20 X.XXX ±0.15 ±2° www.gct.co Card Detect Switch Circuit Without CardCard Inserted DSW1 DSW2 DSW1 DSW2 8x 0.55 DSW1 P2 P3 P4 P5 P6 P7P8
13.66 7.70 13.83 2.80 0.86 0.90 1.05 2x 0.70 0.78 0.93 1.83 8x 1.10 DSW1 1.14 5.45 9.00 4.00 7.85 0.86 Pin Assignment PinNameDescription P1 DAT2Data Bit 2 P2 CD/DAT3 Card Detect/Data Bit 3 P3CMD Command Line P4 VDDSupply Voltage P5CLK Clock P6VssGround P7 DAT0 Data Bit 0 P8 DAT1 Data Bit 1 DSW1 Lever PinDetected Lever (Vss: GND) DSW2 Switch Pin Detected Switch Recommended PCB Layout As viewed from component side General Tolerance: ±0.05 Solder AreaComponent Outline Keep Out Area A B C D E F G H 678 C 3rd Angle Projection Units: Metric (mm) Tolerances (Except as Noted) Length Angle Product Description This drawing is confidential and copyright of Global Connector Technology, Ltd (GCT). This drawing must not be copied or disclosed without written consent. E & OE Not to Scale Drawn By CC Sheet No. MEM2080Micro SD Memory Card Connector Push-Push, SMT, 1.28mm Profile CC Drawing Release By Detail Revision Part Number Drawing Date 13th December 2021 24/11/22 Date X.X ±0.35 X.XX ±0.20 X.XXX ±0.15 ±2° www.gct.co 5.05 0.35 0.35 13.83 2.66 6.40 2x 3.33 4.45 8x 0.70 1.10 pitch P1 P2 P3 P4 P5 P6 P7P8 DSW2
Pcs/Reel Reels/Carton Pcs/Carton 2400716800 Desiccant Carton Triangular board PE Foam Vacuum Bag A B C D E F G H 678 C 3rd Angle Projection Units: Metric (mm) Tolerances (Except as Noted) Length Angle Product Description This drawing is confidential and copyright of Global Connector Technology, Ltd (GCT). This drawing must not be copied or disclosed without written consent. E & OE Not to Scale Drawn By CC Sheet No. MEM2080Micro SD Memory Card Connector Push-Push, SMT, 1.28mm Profile CC Drawing Release By Detail Revision Part Number Drawing Date 13th December 2021 24/11/22 Date www.gct.co 16.00±0.10 4.00±0.10 2.00±0.10 24.00±0.30 11.60±0.15 Ø1.50+0.10 -0.00 1.75±0.10 2400pcs empty 10pcsempty 10pcs 400mm min.
460 Min
165°~180° Peeling angle Ø380 25.5 Ø80 Pull out direction 2.00