MCR729-5 NJSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

, U na. 20 STERN AVE. SPRINGFIELD, NEW JERSEY 07081 U.S.A. TELEPHONE: (973) 376-2922 (212)227-6005 FAX: (973) 376-8960 Silicon Controlled Rectifiers Reverse Blocking Triode Thyristors ... fast switching, high-voltage Silicon Controlled Rectifiers especially designed for pulse modulator applications In radar and other similar equipment.

  • High-Voltage: VpRM =• 3<W to 800 Volts
  • Turn-On Times: In Nanosecond Range
  • Repetitive Pulse Current to 100 Amps
  • Stable Switching Characteristics Over an Operating Temperature Range From -65 to +10B°C « Pulse Repetition Rates 83 High as 10,000 pps -OK MAXIMUM RATINGS (Tj ~ 106°C unless otherwise noted,) MCR729-5 thru MCR729-10 SCRs

6 AMPERES RMS

(TO-B4I Characteristic Peak Repetitive Forward Blocking Voltage, Note 1 MCR729-5

  • 10 Peak Repetitive Reverse Blocking Voltage, Note 1 Forward Current RMS Average Forward Power Peak Repetitive On-State Control (PW = 10 us) Peak Forward Gate Power Average Forward Gate Power Peak Forward Gate Current Peak Forward Gate Voltage Peak Reverse Gate Voltage Operating Junction Temperature Renge Storage Temperature Range Stud Torque Symbol VDRM VRRM ITIRMSI PFIAVI ITRM PGFM PGFIAV) IGFM VGFM VGRM TJ Tstg Value 300 400 500 600 700 800 100 -65 to 4-10$ -66 to +160 Unit Volts Volts Amps Wens Amps Watts Watt Amps Volts Volts In, Ib. Note 1, Ratings apply for zero or negative gate voltages. Devices shell not have a positive bias to the gate concurrently with a negative potential on the anode. Devices should not be tested with a constant currant source for forward and reverse blocking voltages such that the applied voltage exceeds the ratings. Oiitilitv NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished b> N.I Semi-Conductors is believed to be both accurate and reliable at the time of going to press. However, NJ Seini-Conductors assumes no responsibility for any errors or omissions discovered in its use. N.I Semi-Conductors encourages customers to verify that datasheets are current before placing orders.

ELECTRICAL CHARACTERISTICS (Tc = 25°C unless otherwise noted.) Characteristic Peak Forward or Reverse Blocking Current (Rated VDRM or VRRM, gate open) TC = 105°C Gate Trigger Current (Continuous dc) (Vo - 7 vdo, RL = 100 ohms) Gate Trigger Voltage (Continuous dc) (Vo » 7 Vdo, RL - 100 ohms) Holding Current (VD = 7 Vdc, gate open) Forward On Voltage (IjM =» 6 A, PW « 1 ms. Duty Cycle « 1%) Dynamlo Forward On Voltage (0.6 /a after 50% pt, IQ - 200 mA, VD = Rated VDRM. 'Fipuisel " 30 AmPs> Turn-On Time (tj + tr) (|Q - 200 mA, VD - Rated VDRM> HTM = 30 Amps peak) HTM - 100 Ampa peak) Turn-On Time Variation (Tc - +Z6"C to + 105°C and -66"C to +25°C, ITM - 30 A) Pulse Turn-Off Time I'Rpulse) " 30 Arop*- Ireversa = 0) (Inductive charging circuit) Forward Voltage Application Rate (Linear Rate of Rise) (Vo a Rated VDRM, gate open, TC = 105*C) Thermal Resistance (Junction to Case) Symbol 'DRM. 'RRM IGT VQT IH VTM nM *on *on tree dv/dt «JC Mln ~~" Typ 0.2 0,8 200 400 ±600 MM SO 1.S 2.6 Unit mA mAdc Volts mA Volts Volts ns ns us V/MS

  • C/W