MCDP6150 KINETIC | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 5
Technical content
June 2021 – Revision 03g Page 1 of 5 Company Confidential MCDP6150 DisplayPort 1.4a Link Training Tunable PHY Retimer Kinetic Technologies cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Kinetic Technologies product. No intellectual property or circuit patent licenses are implied. Kinetic Technologies reserves the right to change the circuitry and specifications without notice at any time . Datasheet Brief
June 2021 – Revision 03g Page 2 of 5 Company Confidential Datasheet Brief MCDP6150
Features
- DisplayPort 1.4a Link Training Tunable PHY Retimer (LTTPR) to support − 4/2/1-Lane DP1.4a (RBR/HBR/HBR2/HBR3)
- Power Supply Voltages − 1.8 V for I/O, 1.2 V for Core
- DP1.4a Compliant Retimer − Data rate 1.62 Gbps / 2.7 Gbps / 5.4 Gbps / 8.1 Gbps − Transparent mode with proprietary link training architecture − Non-transparent mode support as specified in DP1.4a standard − AUX_CH transaction snooping − DP1.4a Compliant Retimer DPCD registers − 8b/10b coding − Pattern generator and Error Checker − Down-spreading of link clock − Error detection − Adjustable TXEQ during the link training through AUX_CH − Adaptive equalizer with CTLE and DFE − DFE + CTLE for HBR3 to compensate - 27dB insertion loss @4.05GHz − CTLE for HBR2 / HBR / RBR − Support of custom PHY configuration through TWI
- Real time Eye Opening Monitor (EOM)
- TWI (Two Wire Interface) slave to configure the integrated lane mapping and operation mode − Compatible with I2C master − Support up to 4 unique TWI device ID
- Low Power Operation − 460 mW for 4-lane HBR3 in typical condition − < 10mW in D3 mode − < 1mW in low power mode
- ESD Specification − 2kV HBM, ±500V CDM
- Package − 46 Ex-VQFN (6.5 mm x 4.5 mm)
Applications
- Desktop PC / Notebook / Tablet
- Active cable
- Virtual Reality / Augmented Reality head mount display
- DP1.4a monitor (8K monitor / Gaming monitor)
- Video card / converter
- Video router / switch
- 4K / 8K UHD camera
- Video conferencing
- Digital signage
- Interactive display
Table 1. DP1.4a Repeater Mode The MCDP6150 operates at two power supplies; 1.8 V and 1.2 V.
- 460 mW with an active 4 lane retimer (DP 4 lanes HBR3) in typical condition
The MCDP6150 is offered in a 46-pin, 6.5 mm x 4.5 mm Ex-VQFN package.
training is initiated by the DPTX device through the AUX_CH. Figure 4. MCDP6150 Use Case