MBR030 NJSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
j ro aucti, One. 20 STERN AVE. SPRINGFIELD, NEW JERSEY 07081 U.S.A. TELEPHONE: (973) 376-2922 (212)227-6005 FAX: (973) 376-8960 MBR030 MBR040 Advance Information SWITCHMODE RECTIFIERS ... designed for use in switching power supplies, inverters, and as free wheeling diodes, these devices have the following features:
- Low Forward Voltage
- Low Leakage Current
- DO-204AH (DO-35) Glass Package MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Vollaga Average Rectified Forward Current (Rated VR) TL - 90°C, L = %• TA - WC, L - W, (Mt. Method #11 Nonrepetitlve Peak Surge Current (Surge applied at rated load conditions halrwave, single phase, 60 Hi} Operating junction and Storage Temperature Symbol VRRM VRWM VR IFIAVJ IFSM MBR030 MSR040 -15.0- -65 to +160 Unit Volts Amps Amps THERMAL CHARACTERISTICS CharacterMk Thermal Resistance, Junction to Lead = W Symbol RftJL Typ 180 Max 190 Unit °c/w
ELECTRICAL CHARACTERISTICS
Instantaneous Foward Voltage (1) (IF - 0.1 A, Tj - 26°C) (ip - 0.5 A, Tj - 25'C) Reverse Current (Rated dc Voltage, Tj = 1SO°C) (Rated dc Voltage, Tj = 25°C) Symbol VF iR TYP 0.460 0.610 0.6 0.003 Max 0.600 0.760 1.0 0.001 Unit Volts mA (t) Pulie T«it: Pulsa Width =• 300 »a. Duty Cycls «. 2.0%. This document contains Information on a new product. Specifications and information herein are subject to change without notice. SCHOTTKY RECTIFIERS
0.5 AMPERE
A D F K MIU1I ETERt MIN. 3.05 |.SZ o.« IS*) MAX1 ?•$ 113 -SSL 127 38.10 INC MN 0.120 0.1X0 0.011 1.000 HES MAX 0.200 1090 0.022 0..050 1.500 Al JEMC dminilaii ind ruin ipfty. NOTES: 1. PACKAGE CONTOUR OPTIONAL WITHIN A AND B. HEAT SLUGS, IF ANY. SHALL BE INCLUDED WITHIN THIS CYLINDER. BUT NOT SUBJECT TO THE MINIMUM LIMIT OF 8. 2. LEAD DIAMETER NOT CONTROLLED IN ZONE F TO ALLOW FOR FLASH. LEAD FINISH BUILDUP AND MINOR IRREGULARITIES OTHER THAN HEAT SLUGS. 3. POLARITY DENOTED BY CATHODE BAND. «. DIMENSIONING AND TOLERANCING PER ANSI Y14.5.1873. MECHANICAL CHARACTERISTICS CASE: Glass FINISH: External leads are plated and are readily solderable POLARITY: Cathod indicated by polarity band. WEIGHT: 0.2 Gram (approximately). MAXIMUM LEAD TEMPERATURE FOR SOLD- ERINQPURPOSES: 230'C. tt'fromcaietbr 10 seconds. NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished b> NJ Semi-Conductors is believed to be both accurate and reliable at the time of going to press. However, NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use. NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders. Ounlih/