MB24F NIUHANG | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Electronic Co. Ltd For Approval VOLTAGE CURRENT

  • Reverse Voltage - 40 to 200 V
  • Forward Current - 2 A
  • High Surge Current Capability
  • Designed for Surface Mount Application
  • Case: Molded plastic, MBF
  • Epoxy: UL 94V-O rate flame retardant
  • Terminals: Leads solderable per MIL-STD-202,method 208 guaranteed
  • Mounting position: Any
  • Approx. Weight: 75mg 0.0026oz Remark: (1).+ , - =Polarity mark;
  • For use in low voltage ,high frequency inverters ,DC/DC (2).MBXXF=Modle; converters,free wheeling ,and polarity protection applications MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25° C(UNLESS OTHERWISE NOTED) Single phase,half wave,60Hz,resistive or inductive load.For capacitive load,derate current by 20% MB24F MB26F MB28F MB210F MB215F MB220F Maximum repetitive peak reverse voltage 40 60 80 100 150 200 Maximum RMS Voltag 28 42 56 70 106 140 Maximum DC Blocking Voltage 40 60 80 100 150 200 Maximum average forward rectified current (See fig.1) 0.55 0.70 0.95 Typical Junction Capacitance Per Element (Note 5) Operating junction Storage temperature range 3. Pulse test: 300 μs pulse width, 1% duty cycle. 4. Pulse test: pulse width≤40ms 5. Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. Http://www.nhel.com.cn Data: 2014/10/20 Rev.:A/1 Page: 1 of 3 MB24F THRU MB220F SURFACE MOUNT SHOTTKY BRIDGE 40~200 Volts 2.0 Ampers MBF Unit:(mm) Parameter Symbol Unit

FEATURES

TYPICAL APPLICATIONS V RRM V V RMS V 125 150 175 50Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) I FSM A V DC V 2.0 Maximum instantaneous forward voltage at 2A DC(Note 3) V F V TC=25℃ 0.85 500 200 uA C J pF T J ℃ 10 5 2 mA T STD -55 to +150 ℃ I RRM IF (AV) A Maximum instantaneous reverse current at rated DC blocking voltage (Note 4) 220 TC=125℃ - + MB2XF

Electronic Co. Ltd For Approval RATING AND CHARACTERISTIC CURVES Http://www.nhel.com.cn Data: 2014/10/20 Rev.: A/1 Page: 2 of 3 MB24F THRU MB220F SURFACE MOUNT SHOTTKY BRIDGE Tc, Case Temp (℃) FORWORD VOLTAGE,(V) Fig.1-FORWARD CURRENT DERATING CURVE Fig.2- TYPICAL INSTANTANEOUS FORWARD AVERAGE FORWARD CURRENT,(A) PERCENT OF RATED PEAK REVERSE VOLTAGE% REVERSE VOLTAGE,(V) Fig.3-TYPICAL REVERSE CHARACTERISTICS Fig.4- TYPICAL JUNCTION CAPACITANCE NUMBER OF CYCLES AT 60HZ Fig.5-MAX. NON-REPETITIVE SURGE CURRENT INSTANTANEOUS REVERSE CURRENT (uA)PEAK FORWARD SURGE CURRENT (A) INSTANTANEOUS FORWARD CURRENT,(A)JUNCTION CAPACITANCE,(pF) 1 10 100 TJ=TJMAX. 8.3ms SINGLE HALF SINE-WAVE JEDEC Method 0.1 MB24F MB26F MB28F~210F MB215F~MB220F 0 25 50 75 100 125 150 175 MB24F~MB26F MB215F~MB220F MB28~MB210F Pulse Wide=300us Duty cycle=1% 0.00001 0.0001 0.001 0.01 0.1 100 1000 10000 100000 0 20 40 60 80 100 MB24F~MB26F 25℃ MB24F~MB26F 125℃ MB28F~MB210F 25℃ MB28F~MB210F 125℃ MB215F~MB220F 25℃ MB215F~MB220F 125℃ 100 1000 10000 0.1 1 10 100

Electronic Co. Ltd For Approval A 3.600 - 4.000 0.142 - 0.157 B 4.500 - 4.900 0.177 - 0.193 C 1.200 - 1.600 0.047 - 0.063 D 2.200 - 2.800 0.087 - 0.110 E 0.450 - 1.050 0.018 - 0.041 G 0.550 - 1.900 0.022 - 0.075 A 2.400 0.0945 B 6.000 0.2362 C 1.840 0.0724 D 0.900 0.0354 Packing Information Http://www.nhel.com.cn Data: 2014/10/20 Rev.: A/1 Page: 3 of 3 MB24F THRU MB220F SURFACE MOUNT SHOTTKY BRIDGE MBF T/R 6000 340× 340× 40 360× 360× 60 10 DIM OUTLINE DIMENSIONS MILLIME TERS INCHES DIM MBF MOUNTING PAD LAYOUT OUTLINE DIMENSIONS Quantity (pcs/box) Box Size L× W× H (mm) Carton Size L× W× H (mm) MILLIME TERS INCHES Quantity (box/carton)Package Pack