MB14F NIUHANG | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Electronic Co. Ltd For Approval VOLTAGE CURRENT

  • Reverse Voltage - 40 to 200 V
  • Forward Current - 1 A
  • High Surge Current Capability
  • Designed for Surface Mount Application
  • Case: Molded plastic, MBF
  • Epoxy: UL 94V-O rate flame retardant
  • Terminals: Leads solderable per MIL-STD-202,method 208 guaranteed
  • Mounting position: Any
  • Approx. Weight: 75mg 0.0026oz Remark: (1).+ , - =Polarity mark; (2).NH=niuhang trademark;
  • For use in low voltage ,high frequency inverters ,DC/DC (3).xxxxxx: converters,free wheeling ,and polarity protection applications The first two xx:Production line,According to actual changes; The last three xxx:Periodic code,According to actual changes; (4).MB1XF=Modle; MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25° C(UNLESS OTHERWISE NOTED) Single phase,half wave,60Hz,resistive or inductive load.For capacitive load,derate current by 20% MB14F MB16F MB18F MB110F MB115F MB120F Maximum repetitive peak reverse voltage 40 60 80 100 150 200 Maximum RMS Voltag 28 42 56 70 106 140 Maximum DC Blocking Voltage 40 60 80 100 150 200 Maximum average forward rectified current (See fig.1) 0.57 0.70 0.95 Typical Junction Capacitance Per Element (Note 5) Operating junction Storage temperature range 3. Pulse test: 300 μs pulse width, 1% duty cycle. 4. Pulse test: pulse width≤40ms 5. Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. Http://www.nhel.com.cn Data: 2014/10/20 Rev.:A/1 Page: 1 of 3 MB14F THRU MB120F SURFACE MOUNT SHOTTKY BRIDGE 40~200 Volts 1.0 Ampers MBF Unit:(mm) Parameter Symbol Unit

FEATURES

TYPICAL APPLICATIONS V RRM V V RMS V 125 150 175 C J pF Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) I FSM A V DC V 1.0 Maximum instantaneous forward voltage at 2A DC(Note 3) V F V TC=25℃ 0.85 500 200 uA T J ℃ 10 5 2 mA T STD -55 to +150 ℃ I RRM IF (AV) A Maximum instantaneous reverse current at rated DC blocking voltage (Note 4) 220 TC=125℃ - + MB1XF xxxxx

Electronic Co. Ltd For Approval RATING AND CHARACTERISTIC CURVES Http://www.nhel.com.cn Data: 2014/10/20 Rev.: A/1 Page: 2 of 3 MB14F THRU MB120F SURFACE MOUNT SHOTTKY BRIDGE Tc, Case Temp (℃) FORWORD VOLTAGE,(V) Fig.1-FORWARD CURRENT DERATING CURVE Fig.2- TYPICAL INSTANTANEOUS FORWARD AVERAGE FORWARD CURRENT,(A) PERCENT OF RATED PEAK REVERSE VOLTAGE% REVERSE VOLTAGE,(V) Fig.3-TYPICAL REVERSE CHARACTERISTICS Fig.4- TYPICAL JUNCTION CAPACITANCE NUMBER OF CYCLES AT 60HZ Fig.5-MAX. NON-REPETITIVE SURGE CURRENT INSTANTANEOUS REVERSE CURRENT (uA)PEAK FORWARD SURGE CURRENT (A) INSTANTANEOUS FORWARD CURRENT,(A)JUNCTION CAPACITANCE,(pF) 1 10 100 TJ=TJMAX. 8.3ms SINGLE HALF SINE- WAVE 0.1 MB14F MB16F MB18F~110F MB115F~MB120F 0.2 0.4 0.6 0.8 1.2 0 25 50 75 100 125 150 175 MB14F~MB16F MB115F~MB120F MB18~MB110F Pulse Wide=300us Duty cycle=1% 0.00001 0.0001 0.001 0.01 0.1 100 1000 10000 100000 0 20 40 60 80 100 MB14F~MB16F 25℃ MB14F~MB16F 125℃ MB18F~MB110F 25℃ MB18F~MB110F 125℃ MB115F~MB120F 25℃ MB115F~MB120F 125℃ 100 1000 10000 0.1 1 10 100

Electronic Co. Ltd For Approval A 3.600 - 4.000 0.142 - 0.157 B 4.500 - 4.900 0.177 - 0.193 C 1.200 - 1.600 0.047 - 0.063 D 2.200 - 2.800 0.087 - 0.110 E 0.450 - 1.050 0.018 - 0.041 G 0.550 - 1.900 0.022 - 0.075 A 2.400 0.0945 B 6.000 0.2362 C 1.840 0.0724 D 0.900 0.0354 Packing Information Http://www.nhel.com.cn Data: 2014/10/20 Rev.: A/1 Page: 3 of 3 MB14F THRU MB120F SURFACE MOUNT SHOTTKY BRIDGE MBF T/R 5000 340× 340× 40 360× 360× 60 Quantity (pcs/box) Box Size L× W× H (mm) DIM OUTLINE DIMENSIONS MILLIME TERS INCHES DIM MBF MOUNTING PAD LAYOUT OUTLINE DIMENSIONS Carton Size L× W× H (mm) MILLIME TERS INCHES Quantity (box/carton)Package Pack