MAZL000H PANASONIC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
1Publication date: February 2002 SKE00011BED MAZL000H Series Silicon planar type For surge absorption circuit I Features
- Four elements anode-common type
- Ptot = 200 mW I Absolute Maximum Ratings Ta = 25°C Unit: mm Parameter Symbol Rating Unit Total power dissipation * Ptot 200 mW Junction temperature T j 150 °C Storage temperature T stg −55 to +150 °C I Common Electrical Characteristics Ta = 25°C *1 Note) *: With a printed circuit board Parameter Symbol Conditions Min Typ Max Unit Zener voltage*2 VZ IZ Specified value V Zener knee operating resistance R ZK IZ Specified value Ω Zener operating resistance R Z IZ Specified value Ω Reverse current I R VR Specified value µA 2.90 1.9±0.1 0.16+0.10 –0.06 2.8+0.2 –0.3 1.1+0.3 –0.1 1.10 to 0.1 +0.2 –0.1 1.50(0.65) 0.4±0.2 +0.25 –0.05 (0.95) (0.95) 0.30+0.10 –0.05 543 +0.20 –0.05 10˚ Refer to the list of the
electrical characteristics
Note) 1. Test method according to the JIS C7031 testing 2. Electrostatic breakdown voltage is ±10 kV Test method: IEC1000-4-2 (C = 150 pF, R = 330 Ω , Contact discharge: 10 times) ɹ 3. *1: The VZ value is for the temperature of 25 °C. In other cases, carry out the temperature compensation. *2: Guaranteed at 20 ms after power application. 1: Cathode 1 4: Anode 1, 2 2: Cathode 2 Anode 3, 4 3: Cathode 3 5: Cathode 4 EIAJ: SC-74A Mini5-G1 Package
I Electrical characteristics within part numbers Ta = 25°C VZ (V) I R (mA) R Z (Ω )R ZK (Ω ) IZ VR IZ = 5 mA I Z = 0.5 mA Min Nom Max (mA) Max (V) Max Max Part number Zener voltage Marking symbol MAZL100H 9.4 10.0 10.6 5 0.05 7 30 60 10Z MAZL120H 11.4 12.0 12.7 5 0.05 9 30 80 12Z Note) 1. The V Z value is the one after power application for 20 ms at T a = 25°C. 2. The zener voltage temperature coefficient is the one for T j = 25°C to 150°C. Zener operating resistanceReverse current Ptot Ta IZ VZ IF VF RZ IZ SZ IZ Ct VR 0.001 468 1 0 1 2 1 4 0.01 0.1 100 Zener voltage VZ (V) Zener current IZ (mA) Ta = 25°C MAZL120H MAZL100H MAZL082H MAZL068H MAZL062H 0 250 20015010050 100 150 200 250 Ambient temperature Ta (°C) Power dissipation Ptot (mW) Cu foil t = 0.035 mm 10 mm 0.8 mm 10 mm 0.01 0.1 100 Forward voltage VF (V) Forward current IF (mA) Ta = 25°C 0.1 0.3 0.5 100 Zener operating resistance RZ (Ω ) 13 3 0 55 0 10 100 Zener current IZ (mA) Ta = 25°C MAZL082H MAZL100H MAZL068H MAZL120H MAZL062H 0 1 02 03 04 05 06 0 Zener current IZ (mA) Temperature coefficient of zener voltage SZ (mV / °C) Ta = 25°C to 150°C MAZL082H MAZL068H MAZL062H MAZL100H MAZL120H 2 4 6 8 10 12 Terminal capacitance Ct (pF) Reverse voltage VR (V) Ta = 25°C MAZL068H MAZL062H MAZL082H MAZL100H MAZL120H
Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may ap- pear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Govern- ment if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative character- istics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or gen- eral electronic equipment (such as office equipment, communications equipment, measuring in- struments and household appliances). Consult our sales staff in advance for information on the following applications:
- Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body.
- Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchas- ing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maxi- mum rating, the range of operating power supply voltage and heat radiation characteristics. Other- wise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.