MAX40-28CA

MAX40-12CA MDE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

FEATURES

• Glass passivated junction
• Bidirectional
• 40000W Peak Pulse Power capability on 10x1000 μs waveform
• Excellent clamping capability
• Repetition rate (duty cycle):0.05%
• Sharp breakdown voltage
• Low incremental surge resistance
• Fast response time: typically less than 1.0 ps from 0 volts to BV See Demensions on Page 4
• Typical IR less than 20μA above 10V
• Operation Tempature: -55°C to +150°C MECHANICAL DAT A Terminals: Ag Plated Axial leads, solderable per MIL-STD-750, Method 2026 Mounting Position: Any Weight: 1.490 ± 0.149g (0.053 ± 0.005 ounces) DEVICES FOR BIPOLAR APPLICATIONS MAXIMUM RATINGS AND CHARACTERISTIC S Ratings at 25°C ambient temperature unless otherwise specified. RATING SYMBOL VALUE Peak Pulse Power Dissipation on 10/1000 μs waveform 1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA, U.S.A. Tel: 760-564-8656 • Fax 760-564-2414 UNITS MAX™ 40 Series HIGH CURRENT TRANSIENT VOLTAGE SUPPRESSOR (TVS) DIODE STAND-OFF VOLTAGE 12 TO 150 Volts

40000 Watt Peak Pulse Power

Bidirectional use CA Suffix. Electrical characteristics apply in both directions. Unidirectional A Suffix available as a special order Watts AmpsPeak Pulse Current of on 10-1000 μs waveform Pppm Minimum 20000 Ippm SEE CURVE 5/21/2009

VRWM(V) BREAKDOWN VOLTAGE VBR(V) MIN. @IT TEST CURRENT IT (mA) PEAK PULSE CURRENT Ipp (A) REVERSE LEAKAGE @ VRWM IR(μA) MAXIMUM CLAMPING VOLTAGE @IPP VC (V) MAX40-12CA 2 12 14.0 50 2010.1 2000 19.9 MAX40-13CA 2 13 15.2 50 1860.5 2000 21.5 MAX40-14CA 2 14 16.4 50 1724.1 2000 23.2 MAX40-15CA 2 15 17.6 5 1639.3 500 24.4 MAX40-16CA 2 16 18.8 5 1538.5 200 26.0 MAX40-17CA 2 17 19.9 5 1449.3 50 27.6 MAX40-18CA 2 18 21.1 5 1369.6 20 29.2 MAX40-20CA 2 20 23.4 5 1234.6 20 32.4 MAX40-22CA 2 22 25.7 5 1126.8 20 35.5 MAX40-24CA 2 24 28.1 5 1028.3 20 38.9 MAX40-26CA 2 26 30.4 5 950.1 20 42.1 MAX40-28CA 2 28 32.8 5 881.1 20 45.4 MAX40-30CA 2 30 35.1 5 826.4 20 48.4 MAX40-33CA 2 33 38.7 5 750.5 20 53.3 MAX40-36CA 2 36 42.1 5 688.5 20 58.1 MAX40-40CA 2 40 46.8 5 620.2 20 64.5 MAX40-43CA 3 43 50.3 5 576.4 20 69.4 MAX40-45CA 3 45 52.7 5 550.2 20 72.7 MAX40-48CA 3 48 56.1 5 516.8 20 77.4 MAX40-51CA 3 51 59.7 5 485.4 20 82.4 MAX40-54CA 3 54 63.2 5 459.2 20 87.1 MAX40-58CA 4 58 67.8 5 427.4 20 93.6 MAX40-60CA 4 60 70.2 5 413.2 20 96.8 MAX40-64CA 4 64 74.9 5 388.3 20 103.0 MAX40-70CA 4 70 81.9 5 354.0 20 113.0 MAX40-75CA 4 75 87.7 5 330.6 20 121.0 MAX40-78CA 4 78 91.3 5 317.5 20 126.0 MAX40-85CA 6 85 99.2 5 292.0 20 137.0 MAX40-90CA 6 90 105.5 5 274.0 20 145 MAX40-100CA 6 100 117.0 5 246.9 20 162 MAX40-110CA 6 110 128.5 5 226.0 20 177 MAX40-120CA 6 120 140.0 5 207.3 20 193 MAX40-130CA 6 130 151.5 5 191.4 20 209 MAX40-150CA 8 150 176.0 5 164.6 20 243 MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA. U.S.A. Tel: 760-564-8656 • Fax 760-564-2414 1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com MAX- 40™ Series 5/21/2009

Rating Charactistic Curves 3.0 4.0 150 1.0 2.0 tr = 10μsec. Peak Value IPPM TJ = 25°C Pulse Width(td)is defined as the point where the peak current decays to 50% of I PPM 10/1000μsec.Waveform as defined by R.E.A. td Fig.3 - Pulse Waveform 4.0 Half Value- IPPM 100 IPPM - Peak Pulse Current,% IRSM 3.00 t - Time(ms) 12.5 37.5 62.5 87.5 100 0 25 50 75 100 125 150 175 200 Fig.2 - Pulse Derating Curve Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage,% TA - Ambient Temperature (°C) 10000Pppm 1 PEAK PULSE1 KW 0.1 100 1000 1,000 10,000 td PULSE WIDTH 1 µsec FIG. 1 PEAK PULSE POWER RATING 1 10 100 Non-repetitive pulse waveform shown in Fig. 3T A = 25ºC 100,000 5/21/2009

MDE Semiconductor, Inc. MAX™ 40 Series 78-150 Calle Tampico, Unit 210, La Quinta, CA, U.S.A. Tel: 760-564-8656 • Fax 760-564-2414 Outline Dimensions 1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com Stack 2 chip Stack 3 chip Stack 4 chip Stack 6 chip Stack 8 chip 0.162±0.00984 (4.12±0.25)

0.54 Max

(13.72Ma)x 0.264 Max (6.7Max)

0.866 Min

(22Min) 0.489±0.028 (12.42±0.71) 0.131±0.00984 (3.33±0.25) (13.72Max) 0.264 Max (6.7Max)

0.886 Min

(22.5Min) 0.442±0.028 (11.22±0.71) 0.049±0.002 (1.25±0.05) 0.192±0.00984 (4.88±0.25) (13.72Max) 0.264 Max (6.7Max)

0.838 Min

(21.3Min) 0.519±0.028 (13.18±0.71) 0.049±0.002 (1.25±0.05) 0.049±0.002 (1.25±0.05) 0.252±0.00984 (6.41±0.25) (13.72Max) 0.264 Max (6.7Max) (21.3Min) 0.579±0.028 (14.71±0.71) 0.049±0.002 (1.25±0.05) 0.36±0.018 (9.10±0.46)

0.29 Max

(7.35Max)

0.787 Min

(20.0Min) 0.65±0.032 (16.50±0.83) 0.049±0.002 (1.25±0.05) UNIT: Inch (mm) (13.72Max) 5/21/2009