SA5.0A MDE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

FEATURES

  • Plastic package has Underwriters Laboratory Flammability Classification 94 V-O
  • Glass passivated junction
  • 500W Peak Pulse Power capability on 10/1000 µs waveform
  • Glass passivated junction
  • Low incremental surge resistance
  • Excellent clamping capability
  • Repetition rate (duty cycle): 0.01%
  • Fast response time: typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0ns for bidirectional and 5.0ns for bi directional
  • Typical IR less than 1µA above 10 V
  • High temperature soldering guaranteed: 300°C/10 seconds/ .375", (9.5mm) lead length, 5lbs., (2.3kg) tension MECHANICAL DATA Case: JEDEC DO-15 Molded plastic over glass passivated junction Terminals: Plated Axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denoted positive end (cathode) except Bipolar Mounting Position: Any Weight: 0.015 ounces, 0.4 grams Ratings at 25°C ambient temperature unless otherwise specified. RATING SYMBOL VALUE UNITS Peak Pulse Power Dissipation on 10/1000 µs waveform (NOTE 1, Fig.1) IPPM SEE TABLE 1 Amps Superimposed on Rated Load, Unidirectional only (JEDEC Method)(Note 3) Operatings and Storage Temperature Range T J, TSTG -55 +175 °C NOTES: 1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2. 3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum. Certified RoHS Compliant UL File # E223026 Amps P M(AV) 3.0Steady State Power Dissipation at TL = 75°C Lead lengths .375", 9.5mm (Note 2) Peak Forward Surge Current, 8.3ms Single Half Sine-wave IFSM 70 For Bidirectional use C or CA Suffix for types SA5.0 thru types SA180 (e.g. SA5.0C, SA180CA) Electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Watts PPPM Minimum 500 Watts Peak Pulse Current of on 10/1000 µs waveform (Note 1) 1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 DEVICES FOR BIPOLAR APPLICATIONS VOLTAGE-5.0 TO 180.0 Volts GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR SA5.0 THRU SA180CA

500 Watt Peak Pulse Power

78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 MDE Semiconductor, Inc. RATING AND CHARACTERISTIC CURVES SA5.0 THRU SA180CA 1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com 100 1000 10000 100 1000 10000CJ - Capacitance (pF) Fig. 6 - Capacitance Reverse Voltage (V) Unidirectional Bidirectional TJ = 25°C f = 1MHz Vsig = 50mVp-p VR = Rated Stand-off voltage VR = 0 500 0.1 100 0.1s 1.0s 10s 100s 1.0ms 10ms PPPM-Peak Pulse Power td - Pulse Width (sec.) Non-repetitive Pulse Waveform shown in Fig. 3 TA=25°C Pig.1 - Peak Pulse Power Rating Curve Current Waveforms SquarePPK td=7tp td tdPPK Half Sine Impulse td PPK".5" ExponentialDecay 3.0 4.0 150 1.0 2.0 tr = 10µsec. Peak Value IPPM TJ = 25°C Pulse Width(td)is defined as the point where the peak current decays to 50% of I PPM 10/1000µsec.Waveform as defined b y R.E.A. td Fig.3 - Pulse Waveform 3.00 4.0 Half Value- IPPM t - Time(ms) IPPM - Peak Pulse Current, % IRSM 100 PM(AV),Steady State Power Dissipation (W) 1.0 2.0 3.0 4.0 Fig. 5 - Steady State Power Derating Curve TL - Lead Temperature (°C) L=0.375" (9.5mm) Lead Lengths 1.6x1.6x.040" (40x40x1mm) Copper Heat Sinks 100 1000 1 10 100 200 Number of Cycles at 60 Fig.6 - Maximum Non-Repetitive Forward Surge Current Uni-Directional Only 8.3ms Single Half Sine-Wave (JEDEC Method) IFSM-Peak Forward Surge Current (A) 12.5 37.5 62.5 87.5 100 0 25 50 75 100 125 150 175 200 Fig.2-Power Derating Curve TA - Ambient Temperature (°C) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage,%

500 Watt TVS

(V) BREAKDOWN VOLTAGE VBR (V) MIN. @ IT BREAKDOWN VOLTAGE VBR (V) MAX. @ IT TEST CURRENT (IT) mA MAXIMUM CLAMPING VOLTAGE @IPP VC (V) PEAK PULSE CURRENT IPP (A) REVERSE LEAKAGE @ VRWM IR (µA) SA90A SA90CA 90.00 100.00 111.00 1 146 3.5 3 SA100A SA100CA 100.00 111.00 123.00 1 162 3.1 3 SA110A SA110CA 110.00 122.00 135.00 1 177 2.9 3 SA120A SA120CA 120.00 133.00 147.00 1 193 2.6 3 SA130A SA130CA 130.00 144.00 159.00 1 209 2.4 3 SA150A SA150CA 150.00 167.00 185.00 1 243 2.1 3 SA160A SA160CA 160.00 178.00 197.00 1 259 2.0 3 SA170A SA170CA 170.00 189.00 209.00 1 275 1.9 3 SA180A SA180CA 180.00 200.00 233.00 1 289 1.7 3 For bidirectional type having Vrwm of 10 volts and less, the IR limit is double. For parts without A , the VBR is ± 10% Certified RoHS Compliant UL File # E223026 MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com