MAX-M10 U-BLOX | Alldatasheet
Document overview
- PDF pages: 2
Technical content
Features
Additional SAW • Additional LNA • RTC crystal • • Oscillator C T Timepulse 1 1 Power supply 1.76 V – 5.5 V • 1.76 V – 3.6 V • Standard Professional Automotive UBX-20017987 - R11 Early production information
Receiver type u-blox M10 engine GPS L1 C/A, QZSS L1 C/A L1S, GLONASS L1OF BeiDou B1I/B1C, Galileo E1B/C SBAS L1 C/A: WAAS, EGNOS, MSAS, GAGAN Nav. update rate Up to 5 Hz (4 concurrent GNSS) Up to 18 Hz (single GNSS) Horizontal position accuracy 1 1.5 m CEP MAX-M10M 1 MAX-M10S 2 Acquisition Cold start 28 s 28 s Aided start 2 s 1 s Hot start 1 s 1 s Sensitivity Tracking & Nav. –164 dBm –167 dBm Reacquisition –160 dBm –160 dBm Cold start –148 dBm –148 dBm Hot start –159 dBm –159 dBm Tracking features u-blox Super-S Improved accuracy with small antennas Data batching Autonomous tracking up to 10 min at 1 Hz Odometer Measure traveled distance with support for different user profiles Protection level Real-time position accuracy estimate with 95% confidence Security features Signal integrity RF interference and jamming detection and reporting Spoofing detection and reporting Device integrity Receiver configuration lock by command Secure interface Signed UBX messages (SHA-256) JTAG debug interface disabled by default Electrical data MAX-M10M MAX-M10S Tracking mode Continuous (PSM 3) Continuous (PSM 3) Power consumption at 3 V
2 GNSS: 19 (9) mW 2 GNSS: 28 (18) mW
3 GNSS: 22 (10) mW 3 GNSS: 30 (19) mW
4 GNSS: 25 mW 4 GNSS: 34 mW
at 1.8 V
2 GNSS: 19 (9) mW 2 GNSS: 24 (14) mW
3 GNSS: 22 (10) mW 3 GNSS: 27 (15) mW
4 GNSS: 25 mW 4 GNSS: 30 mW
Power supply 1.76 V to 5.5 V 1.76 V to 3.6 V Backup supply 1.65 V to 3.6 V 1.65 V to 3.6 V Package 18 pin LCC (Leadless Chip Carrier): 9.7 × 10.1 × 2.5 mm, 0.6 g Environmental data, quality & reliability Operating temp. −40 °C to +85 °C Storage temp. −40 °C to +85 °C Environmental grade2015/863/EU RoHS-3 EMC (electromag- netic compatibility) 2014/53/EU RED Environmental testing ISO 16750 Quality management Manufactured and fully tested in IATF 16949 certified production sites Interfaces Serial interfaces 1 UART
1 DDC (I2C compliant)
Digital I/O Configurable timepulse
1 EXTINT input for Wakeup
Raw Data output Code phase data Timepulse Configurable: 0.25 Hz to 10 MHz Supported antennas Active and passive Protocols NMEA 4.11, UBX binary Compatible u-blox location services AssistNow Real-time online A-GNSS service with assured global availability CloudLocate Extends the life of energy-constrained IoT
applications
EVK-M101 u-blox M10 GNSS evaluation kit with UBX-M10050-KB chip and TCXO EVK-M101C u-blox M10 GNSS evaluation kit with UBX-M10050-KB chip and crystal oscillator u-center 2 Highly intuitive software for GNSS perfor- mance evaluation Product variants MAX-M10M u-blox M10 concurrent GNSS LCC module, firmware in ROM, crystal oscillator MAX-M10S u-blox M10 concurrent GNSS LCC module, firmware in ROM, SAW filter, LNA, TCXO1 = GPS/Galileo + SBAS/QZSS continuous tracking 2 = GPS/Galileo/Beidou + SBAS/QZSS continuous tracking 3 = Power save mode, 1 Hz cyclic tracking Further information For contact information, see www.u-blox.com/contact-u-blox. For more product details and ordering information, see the product data sheet. UBX-20017987 - R11 Early production information Legal Notice: u-blox reserves all rights to this document and the information contained herein. Products, names, logos and designs described herein may in whole or in part be subject to intellectual property rights. Reproduction, use, modification or disclosure to third parties of this doc- ument or any part thereof without the express permission of u-blox is strictly prohibited. The information contained herein is provided “as is”. No warranty of any kind, either express or implied, is made in relation to the accuracy, reliability, fitness for a particular purpose or content of this document. This document may be revised by u-blox at any time. For most recent documents, please visit www.u-blox.com. Copyright © 2022, u-blox AG