DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
www.micropowerdirect.com MicroPower Direct
292 Page Street
Stoughton, MA 02072 USA T: (781) 344-8226 F: (781) 344-8481 E: sales@micropowerdirect.com W: www.micropowerdirect.com MACFM-02A Key Features: 85 to 305 VAC Input Compact Case 20 dB Attenuation -40°C to +85°C Operation Chassis Mount Option DIN Rail Mount Option Low Cost Input Parameter Conditions Min. Typ. Max. Units Input Voltage Range, See Note 1 85 305 VAC Nominal Current, See Note 2 1.5 A General Parameter Conditions Min. Typ. Max. Units Test Voltage 60 Sec, 1 mA Leakage Current 2,000 VAC Frequency Attenuation 20 dB Conducted Emissions EN 55022 Class B Surge EN 61000-4-5 Criteria B; ±2 kV (1.2 µS/50 µS 2/H9024) Criteria B; ±4 kV (1.2 µS/50 µS 12/H9024) Parameter Conditions Min. Typ. Max. Units Operating Temperature Range Ambient -40 +25 +85 °C Storage Temperature Range -55 +125 °C Cooling Free Air Convection Humidity RH, Non-condensing 95 % Physical Case Size Module See Mechanical Drawing (Page 2) Chassis (A2) Mount See Mechanical Drawing (Page 2) DIN (A4) Mount See Mechanical Drawing (Page 2) Case Material Non-Conductive Black Plastic (UL94-V0) Weight Module 0.71 Oz (20g) Chassis (A2) Mount 1.41 Oz (40g) DIN (A4) Mount 2.11 Oz (60g) Electrical Specifi cations Specifi cations typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifi cations subject to change without notice. Wide Input, AC Encapsulated EMC Filter Module Schematic Typical Connection MACFM-02A fi lter modules operate with many standard MPD AC/DC power supplies. With these modules, most AC power supplies will meet the surge requirements of EN 61000-4-5 and the EMS require- ments of EN 55022. Contact the factory for information on our full range of fi lter products. Notes: 1. The Max input voltage level of the power supply must be less than the maximum specifi ed input of the MACFM-02A. 2. The Max input current of the power supply must be less than the maximum specifi ed nominal current of the MACFM-02A.
We Power Your Success - For Less! 292 Page Street Ste D Stoughton, MA 02072 TEL: (781) 344-8226 FAX: (781) 344-8481 E-Mail: sales@micropowerdirect.com www.micropowerdirect.com For the chassis mount option, add suffi x “A2” to the model number (i.e. MACFM-02A-A2) www.micropower direct.co mwww.micropowerdirect.com Mechanical Dimensions Mechanical Dimensions: With Chassis Mount Option (A2) Pin Function
1 GND
2I N (N) 3I N (L)
4 OUT (L)
5 OUT (N)
The MACFM-02A is available mounted on an adapter plate for mounting to a chassis or on a DIN rail. Mechanical dimensions for these adapters are shown at right. The photo below shows a product mounted on a similar adapter. Please contact the factory for more information. Mechanical Dimensions: With DIN Rail Option (A4)Pin Function 2I N (N) 3I N (L) same for A2 & A4 Pin Con nec tions For the DIN rail mount option, add suffi x “A4” to the model number (i.e. MACFM-02A-A4) Notes:
- All dimensions are typical in inches (mm)
- Tolerance x.xx = ±0.02 (±0.50)
- Wire range for A2 & A4 connection is 24 - 12 AWG