MAC320 NJSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
, Li ne. 20 STERN AVE. SPRINGFIELD, NEW JERSEY 07081 U.S.A. TELEPHONE: (973) 376-2922 (212)227-6005 FAX: (973) 376-8960 TttBCS Silicon Bidirectional Thyristors designed primarily for full-wave ac control applications, such as solid-state relays, motor controls, heating controls and power supplies; or wherever full-wave silicon gate controlled solid-state devices are needed. Triac type thyristors switch from a blocking to a conducting state for either polarity of applied anode voltage with positive or negative gate triggering. . Blocking Voltage to 800 Volts
- All Diffused and Glass Passivated Junctions for Greater Parameter Uniformity and Stability
- Small, Rugged, Thermowatt Construction for Low Thermal Resistance, High Heat Dissipation and Durability . Gate Triggering Guaranteed in Three Modes (MAC320 Series) or Four Modes (MAC320A Series) MAXIMUM RATINGS (Tc = 25°C unless otherwise noted.) MAC320 MAC320A TRIACs
20 AMPERES RMS
(TO-220AB1 Rating Peak Repetitive Off-State VoltageO) (Tj = -40 to +125°C, 1/2 Sine Wave 50 to 60 Hz, Gate Open) MAC320-4, MAC320A4 MAC320-6, MAC320A6 MAC320-8, MAC320A8 MAC320-10, MAC320A10 Peak Gate Voltage On-State Current RMS (Tc = +75°C) (Full Cycle, Sine Wave, 50 to 60 Hz) Peak Surge Current (One Full Cycle, 60 Hz, TC = +75°C) preceded and followed by rated current Peak Gate Power (TC = +75°C, Pulse Width = 2 us) Average Gate Power (TC = +75°C, t = 8.3 ms) Peak Gate Current Operating Junction Temperature Range Storage Temperature Range Symbol VDRM VGM 'T(RMS) PGM Tstg Value 200 400 600 800 150 0.5 -40 to+125 -40 to+150 Unit Volts Volts Amp Amp Watts Watt Amp THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Case Symbol R9JC Max 1.8 Unit °C/W 1. VDRM for all types can be applied on a continuous basis. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by NJ Semi-Conductors is believed to be both accurate and reliable at the time of going to press. However, NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use. NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders. Quality Semi-Conductors