MAC223

MAC223 SYC | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 7

Technical content

Product specification July 2001 DISCRETE SEMICONDUCTORS MAC223 series Triacs www.sycelectronica.com.ar

July 2001 2 Rev 1.000 Philips Semiconductors Product specification Triacs MAC223 series GENERAL DESCRIPTION QUICK REFERENCE DATA Passivated triacs in a plastic envelope,SYMBOL PARAMETER MAX MAX. UNIT intended for use in applications requiring high bidirectional transient and blocking MAC223 A6 A8 voltage capability and high thermal cycling performance. Typical V DRM Repetitive peak off-state 400 600 V applications include motor control, voltages industrial and domestic lighting, heating IT(RMS) RMS on-state current 25 25 A and static switching. I TSM Non-repetitive peak on-state 230 230 A current PINNING - TO220AB PIN CONFIGURATION SYMBOL PIN DESCRIPTION 1 main terminal 1 2 main terminal 2 3 gate tab main terminal 2 LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT MAC223 A6 A8 VDRM Repetitive peak off-state - 400 1 6001 V voltages IT(RMS) RMS on-state current full sine wave; Tmb ≤ 91 ˚C - 25 A ITSM Non-repetitive peak full sine wave; Tj = 25 ˚C prior to on-state current surge t = 20 ms - 190 A t = 16.7 ms - 230 A I 2tI 2t for fusing t = 10 ms - 180 A 2s dIT/dt Repetitive rate of rise of ITM = 30 A; IG = 0.2 A; on-state current after dIG /dt = 0.2 A/µs triggering T2+ G+ - 50 A/ µs T2+ G- - 50 A/ µs T2- G- - 50 A/ µs T2- G+ - 10 A/ µs IGM Peak gate current - 2 A VGM Peak gate voltage - 5 V PGM Peak gate power - 5 W PG(AV) Average gate power over any 20 ms period - 0.5 W Tstg Storage temperature -40 150 ˚C Tj Operating junction - 125 ˚C temperature T1T2 G12 3 tab 1 Although not recommended, off-state voltages up to 800V may be applied without damage, but the triac may switch to the on-state. The rate of rise of current should not exceed 15 A/µs. www.sycelectronica.com.ar

July 2001 3 Rev 1.000 Philips Semiconductors Product specification Triacs MAC223 series THERMAL RESISTANCES SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT R th j-mb Thermal resistance full cycle - - 1.0 K/W junction to mounting base half cycle - - 1.4 K/W R th j-a Thermal resistance in free air - 60 - K/W junction to ambient STATIC CHARACTERISTICS Tj = 25 ˚C unless otherwise stated SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT I GT Gate trigger current V D = 12 V; IT = 0.1 A T2+ G+ - 6 50 mA T2+ G- - 10 50 mA T2- G- - 11 50 mA T2- G+ - 23 75 mA I L Latching current V D = 12 V; IGT = 0.1 A T2+ G+ - 8 40 mA T2+ G- - 30 60 mA T2- G- - 18 40 mA T2- G+ - 15 60 mA I H Holding current V D = 12 V; IGT = 0.1 A T2+ - 7 30 mA T2- - 12 30 mA VT On-state voltage I T = 30 A - 1.3 1.55 V VGT Gate trigger voltage V D = 12 V; IT = 0.1 A - 0.7 1.5 V VD = 400 V; IT = 0.1 A; Tj = 125 ˚C 0.25 0.4 - V ID Off-state leakage current VD = VDRM(max) ; Tj = 125 ˚C - 0.1 0.5 mA DYNAMIC CHARACTERISTICS Tj = 25 ˚C unless otherwise stated SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT dV D /dt Critical rate of rise of VDM = 67% VDRM(max) ; Tj = 125 ˚C; 100 300 - V/ µs off-state voltage exponential waveform; gate open circuit dVcom /dt Critical rate of change of VDM = 400 V; Tj = 95 ˚C; IT(RMS) = 25 A; - 10 - V/ µs commutating voltage dI com /dt = 9 A/ms; gate open circuit tgt Gate controlled turn-on ITM = 30 A; VD = VDRM(max) ; IG = 0.1 A; - 2 - µs time dI G /dt = 5 A/µs www.sycelectronica.com.ar

July 2001 4 Rev 1.000 Philips Semiconductors Product specification Triacs MAC223 series Fig.1. Maximum on-state dissipation, Ptot, versus rms on-state current, IT(RMS) , where α = conduction angle. Fig.2. Maximum permissible non-repetitive peak on-state current ITSM , versus pulse width tp, for sinusoidal currents, tp ≤ 20ms. Fig.3. Maximum permissible non-repetitive peak on-state current ITSM , versus number of cycles, for sinusoidal currents, f = 50 Hz. Fig.4. Maximum permissible rms current IT(RMS) , versus mounting base temperature Tmb . Fig.5. Maximum permissible repetitive rms on-state current IT(RMS) , versus surge duration, for sinusoidal currents, f = 50 Hz; Tmb ≤ 91˚C. Fig.6. Normalised gate trigger voltage VGT (Tj)/ VGT (25˚C), versus junction temperature Tj. 0 5 10 15 20 25 30 = 180 120 IT(RMS) / A Ptot / W Tmb(max) / C 125 115 105 -50 0 50 100 1500 BTA140 91 C Tmb / C IT(RMS) / A 10us 100us 1ms 10ms 100ms10 100 1000 T / s ITSM / A T ITSM time I Tj initial = 25 C max T dI /dt limitT T2- G+ quadrant 0.01 0.1 1 100 surge duration / s IT(RMS) / A 1 10 100 10000 100 150 200 Number of cycles at 50Hz ITSM / A T ITSM time I Tj initial = 25 C max T -50 0 50 100 1500.4 0.6 0.8 1.2 1.4 1.6 Tj / C VGT(Tj) VGT(25 C) www.sycelectronica.com.ar

July 2001 5 Rev 1.000 Philips Semiconductors Product specification Triacs MAC223 series Fig.7. Normalised gate trigger current IGT (Tj)/ IGT (25˚C), versus junction temperature Tj. Fig.8. Normalised latching current IL(Tj)/ IL(25˚C), versus junction temperature Tj. Fig.9. Normalised holding current IH (Tj)/ IH (25˚C), versus junction temperature Tj. Fig.10. Typical and maximum on-state characteristic. Fig.11. Transient thermal impedance Zth j-mb, versus pulse width tp. Fig.12. Typical commutation dV/dt versus junction temperature, parameter commutation dIT/dt. The triac should commutate when the dV/dt is below the value on the appropriate curve for pre-commutation dIT/dt. -50 0 50 100 1500 Tj / C T2+ G+ T2+ G- T2- G- T2- G+ IGT(Tj) IGT(25 C) 0 0.5 1 1.5 2 2.5 30 BTA140 VT / V IT / A Tj = 125 C Tj = 25 C Vo = 1.073 V Rs = 0.015 ohms typ max -50 0 50 100 1500 0.5 1.5 2.5 Tj / C IL(Tj) IL(25 C) 0.001 0.01 0.1

10 BTA140

Zth j-mb (K/W) 10us 0.1ms 1ms 10ms 0.1s 1s 10s tpP t D bidirectional unidirectional -50 0 50 100 1500 0.5 1.5 2.5 Tj / C IH(Tj) IH(25C) 0 50 100 1501 100 1000 9.015 Tj / C dV/dt (V/us) 7.0 dIcom/dt =

25 A/ms 20

www.sycelectronica.com.ar

July 2001 6 Rev 1.000 Philips Semiconductors Product specification Triacs MAC223 series Dimensions in mm Net Mass: 2 g Fig.13. SOT78 (TO220AB). pin 2 connected to mounting base. Notes 1. Refer to mounting instructions for SOT78 (TO220) envelopes. 2. Epoxy meets UL94 V0 at 1/8". 10,3 max 3,7 2,8 3,03,0 max not tinned 1,3 max (2x) 123 2,4 0,6 4,5 max 5,9 min 15,8 max 1,3 2,54 2,54 0,9 max (3x) 13,5 min www.sycelectronica.com.ar

July 2001 7 Rev 1.000 Philips Semiconductors Product specification Triacs MAC223 series DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.

Application information

Where application information is given, it is advisory and does not form part of the specification.  Philips Electronics N.V. 2001 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. www.sycelectronica.com.ar