MA6 TIMOTION | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 8

Technical content

  • Industrial Motion MA6 series Engineered by a unique design by TiMOTION, the MA6 series linear actuator is an excellent solution for applications that require heavy duty and incredible durability. Offering a high degree of protection up to IP69K, the MA6 can be constructed to withstand high-pressure water jets, ingress of dust, and other solid contaminants. Depending on the user's application requirements, the MA6 is customizable with a variety of feedback options for improved control and accuracy of motion. Robust, solid, and powerful, the MA6 is ideal for agricultural, commercial, and industrial applications such as combine harvesters, balers, lawn mowers, material handling equipment, livestock ventilation systems, and much more. General Features Max. load 8,000N (push/pull) Max. speed at max. load 6.2mm/s Max. speed at no load 64mm/s Retracted length ≥ Stroke + 162mm IP rating IP69K Stroke 25~1000mm Output signals Hall sensor(s), mechanical Pot., adjustable Reed switch, NPN Hall sensors Voltage 12/24V DC; 12/24V DC (thermal switch) Operational temperature range -40°C~+85°C Operational temperature range +5°C~+45°C at full performance Manual drive

(mm) Drawing Note 1 Please refer to the approved drawing for the final authentic value. 2 The current & speed in table are tested with 24V DC motor. With a 12V DC motor, the current is approximately twice the current measured in 24V DC; speed will be similar for both voltages. 3 The current & speed in table are tested when the actuator is extending under push load. 4 The current & speed in table and diagram are tested with a stable 24V DC power supply. 5 Without load, noise level ≤ 78dBA (by TiMOTION test standard, ambient noise level ≤ 36dBA). 6 Standard stroke: Min. 25mm, Max. please refer to the table below. CODE Load (N) Max Stroke (mm) B, C ≤ 2000 1000 D ≤ 4000 700 E ≤ 8000 300 Load and Speed CODE Load (N) Self Locking Force (N) Duty Cycle Typical Current (A) Typical Speed (mm/s) Push Pull Mechenical Brake No Load 24V DC With Load 24V DC No Load 24V DC With Load 24V DC Motor Speed (5100RPM) B 1000 1000 1300 25% 3.5 9.0 64.0 50.0 C 2000 2000 2600 25% 3.5 8.0 32.0 25.5 D 4000 4000 5200 25% 3.5 8.0 16.0 12.8 E 8000 8000 10400 25% 3.5 9.0 8.0 6.2 ∅12.2 Retracted Length 150.8 13.1 81 .5 12.6180.1 ∅25.4 ∅28

Motor Speed (5100RPM) Performance Data (24V DC Motor) MA6 series 0.0 20.0 180.0 40.0 60.0 80.0 100.0 120.0 140.0 160.0 0 2000 4000 6000 8000 1600010000 12000 14000 C D B E Speed (mm/s) Speed vs. Load Load (N) C D B E 0.0 2.0 4.0 10.0 8.0 6.0 0 2000 4000 6000 8000 1000010000 12000 14000 Current (A) Current vs. Load Load (N)

Version: 20231106-B Hardware System N = Normal Voltage 1 = 12V DC 2 = 24V DC 6 = 12VDC, thermal switch 5 = 24VDC, thermal switch Load and Speed See page 2 Stroke (mm) Retracted Length (mm) See page 5 See page 2 Adjustable Reed Switch Output Signal IP Rating 0 = Without 1 = Reed switch*1, tinned leads 2 = Reed switch*2, tinned leads 0 = Without 1 = Mechanical Pot. 4 = Hall sensor*1 5 = Hall sensor*2 N = NPN Hall sensor*2 1 = Without 6 = IP66M 7 = IP67 8 = IP68 9 = IP69K Rear Attachment (mm) See page 6 Front Attachment (mm) See page 6-7 1 = #45 Steel, slotless, hole 10.2 2 = #45 Steel, slotless, hole 12.2 3 = #45 Steel, slotless, hole 12.8 4 = #45 Steel, U clevis, slot 8.2, depth 12.5, hole 10.2 5 = #45 Steel, U clevis, slot 8.2, depth 12.5, hole 12.2 6 = #45 Steel, U clevis, slot 8.2, depth 12.5, hole 12.8 7 = #45 Steel, U clevis, slot 8.2, depth 15.0, hole 10.2 8 = #45 Steel, U clevis, slot 8.2, depth 15.0, hole 12.2 9 = #45 Steel, U clevis, slot 8.2, depth 15.0, hole 12.8 1 = #45 Steel, slotless, hole 10.2 2 = #45 Steel, slotless, hole 12.2 3 = #45 Steel, slotless, hole 12.8 7 = #45 Steel, U clevis, slot 8.2, depth 15.0, hole 10.2 8 = #45 Steel, U clevis, slot 8.2, depth 15.0, hole 12.2 9 = #45 Steel, U clevis, slot 8.2, depth 15.0, hole 12.8 K = Rod end bearing, hole 12.8 Direction of Rear Attachment (Counterclockwise) See page 7 1 = 0° 3 = 90° Function of Limit Switches See page 8 1 = Two micro switches cut off the actuator at end of stroke 3 = Two micro switches send signal at end of stroke (signal type: normally closed) Cable Exit P2 Cable Length P3 Connector P3 Cable Length A1 / P1 Cable Length (mm) P2 Connector 1 = Single cable 01 = Tinned leads, unsheathed wire 50, stripped wire 10 0000 = Without cable 00 = Without 0000 = Without cable 0500 = 500 1000 = 1000 1500 = 1500 2000 = 2000 00 = Without Alternative Packaging (mm2) N = Normal 0 = Sample packaging C = Standard package, US fumigated pallet (1219*1016) 1 = Standard package, EU fumigated pallet (1200*800) 2 = Standard package, EU fumigated pallet (1500*800) E = Standard package, US plywood pallet (1219*1016) 5 = Standard package, EU plywood pallet (1200*800) 6 = Standard package, EU plywood pallet (1500*800) A1 / P1 Connector (mm) See page 7

  1. Calculate A+B+C = Y 2. Minimum retracted length is Stroke+Y Retracted Length (mm) Output Signal 0, 4, 5, N - 1 +18 Stroke (mm) Load & Speed Type (N) B, C, D, E 25~150 - 151~200 - 201~250 +10 251~300 +20 301~350 +30 351~400 +40 401~450 +50 451~500 +60 501~550 +70 551~600 +80 601~650 +90 651~700 +100 701~750 +110 751~800 +120 801~850 +130 851~900 +140 901~950 +150 951~1000 +160 Front Attach. Rear Attach. 1, 2, 3 +162 +165 7, 8, 9 +175 +178 K +185 +188 Note

1 Depending on the attachments, the motor cover might interfere with the

customer's device when retracted length is between 225~318mm. Please confirm before placing order.

1 = #45 Steel, slotless, hole 10.2 2 = #45 Steel, slotless, hole 12.2 6 = #45 Steel, U clevis, slot 8.2, depth 12.5, hole 12.8 3 = #45 Steel, slotless, hole 12.8 7 = #45 Steel, U clevis, slot 8.2, depth 15.0, hole 10.2 4 = #45 Steel, U clevis, slot 8.2, depth 12.5, hole 10.2 8 = #45 Steel, U clevis, slot 8.2, depth 15.0, hole 12.2 5 = #45 Steel, U clevis, slot 8.2, depth 12.5, hole 12.2 9 = #45 Steel, U clevis, slot 8.2, depth 15.0, hole 12.8 Rear Attachment (mm) ø25.4 12.5 ø10.2 ø25.4 12.5 ø12.2 ø25.4 12.5 ø12.8 12.5 ø10.2 8.2 ø25.4 12.5 ø12.2 8.2 ø25.4 12.5 ø12.8 ø25.4 8.2 15 ø10.2 ø25.4 8.2 15 ø12.2 ø25.4 8.2 15 ø12.8 ø25.4 8.2 1 = #45 Steel, slotless, hole 10.2 2 = #45 Steel, slotless, hole 12.2 3 = #45 Steel, slotless, hole 12.8 7 = #45 Steel, U clevis, slot 8.2, depth 15.0, hole 10.2 Front Attachment (mm) ø28 ø28 8.2 ø10.2 ø28 ø28 ø10.2 ø28 ø28 ø12.2 ø28 ø28 ø12.8

Front Attachment (mm) 9 = #45 Steel, U clevis, slot 8.2, depth 15.0, hole 12.8 K = Rod end bearing, hole 12.88 = #45 Steel, U clevis, slot 8.2, depth 15.0, hole 12.2 ø12.8 ø28 Direction of Rear Attachment (Counterclockwise) 1 = 0° Hole 3 = 90° Hole 90º Connector (mm) 01 = Tinned leads, unsheathed wire 50, stripped wire 10 ø28 ø28 8.2 ø12.2 ø28 ø28 8.2 ø12.8

(AWG) Output Signal P1 Two Micro Switches Cut Off The Actuator

  • RD 14 EXT+ EXT+ EXT+ EXT+
  • BK 14 RET+ RET+ RET+ RET+
  • RD 20 - V-out +5V +5V
  • ● WH 20 - V-in S1 S1
  • BU 20 - - - S2
  • BK 20 - GND GND GND
  • BN 20 - - - -
  • OG 20 - - - -
  • VT 20 - - - - P1 Two Micro Switches Send Signal
  • RD 14 EXT+ EXT+ EXT+ EXT+
  • BK 14 RET+ RET+ RET+ RET+
  • RD 20 COM COM +5V +5V
  • ● WH 20 EOS-extended EOS-extended S1 S1
  • BU 20 EOS-retracted EOS-retracted - S2
  • BK 20 - GND GND GND
  • BN 20 - V-in EOS-extended EOS-extended
  • OG 20 - V-out EOS-retracted EOS-retracted
  • VT 20 - - COM COM Wire Definition Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice.