MA3 TIMOTION | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 8

Technical content

  • Industrial Motion General Features Max. load 16,000N (push/pull) Max. speed at max. load 8.9mm/s Max. speed at no load 172.5mm/s Retracted length ≥ Stroke + 200mm IP rating IP69K Certificate UL73, EMC Stroke 25~1000mm Output signals Mechanical Pot., adjustable Reed switch, NPN Hall sensors, PNP Hall sensors Voltage 12/24/36/48V DC; 12/24V DC (thermal switch) Operational temperature range -40°C~+85°C Operational temperature range +5°C~+45°C at full performance Manual drive TiMOTION's MA3 was specifically designed for heavy-duty applications and harsh working environments that require durability. Examples of applications suitable for the MA3: Agricultural equipment such as spreaders, harvesters, grain handlers, combines, and tractors. Commercial and industrial applications such as commercial lawn mowers, scrubbers and sweepers, and material handling equipment.

(mm) Drawing CODE Load (N) Max Stroke (mm) F, K, G ≤ 2500 1000 H ≤ 5000 800 M, N, P, Q ≤ 10000 600 J, R ≤ 16000 400 Load and Speed CODE Load (N) Self Locking Force (N) Duty Cycle Typical Current (A) Typical Speed (mm/s) Push Pull Mechenical Brake No Load 24V DC With Load 24V DC No Load 24V DC With Load 24V DC Motor Speed (5100RPM) F 500 500 650 25% 2.5 10.2 172.5 152.0 K 1000 1000 1300 25% 2.5 10.2 86.0 76.0 G 2500 2500 3250 25% 2.5 10.5 43.0 38.0 H 5000 5000 6500 25% 2.5 10.2 21.5 19.0 M 7500 7500 9750 25% 2.5 11.4 14.0 12.4 N 10000 10000 13000 25% 2.5 11.3 10.5 9.3 J 16000 16000 20800 15% 2.5 12.6 7.2 6.2 P 7500 7500 9750 25% 3.0 12.0 21.3 18.2 Q 10000 10000 13000 25% 3.0 10.5 14.2 12.5 R 16000 16000 20800 15% 3.0 13.0 10.6 8.9 Note 1 Please refer to the approved drawing for the final authentic value. 2 The current & speed in table are tested with 24V DC motor. With a 12V DC motor, the current is approximately twice the current measured in 24V DC. With a 36V DC motor, the current is approximately two-thirds the current measured in 24V DC. With a 48V DC motor, the current is approximately half the current measured in 24V DC. Speed will be similar for all the voltages. 3 The current & speed in table are tested when the actuator is extending under push load. 4 The current & speed in table and diagram are tested with a stable 24V DC power supply. 5 With load, noise level ≤ 78dBA (by TiMOTION test standard, ambient noise level ≤ 36dBA). 6 Standard stroke: Min. 25mm, Max. please refer to below table. Retracted Length 250.1 229.135.1 ∅12.8∅12.8 50.5 15.9 1312.9 19.5 ∅25.4 ∅34 76 146.4 34.1

Motor Speed (5100RPM) Performance Data (24V DC Motor) MA3 series 0 80004000 12000 1600060002000 10000 14000 0.0 40.0 80.0 120.0 180.0 160.0 20.0 60.0 100.0 140.0 H G F K M P Q N R J Speed (mm/s) Speed vs. Load Load (N) 2.0 0.0 4.0 6.0 8.0 14.0 12.0 10.0 0 80004000 12000 1600060002000 10000 14000 HGF K M P N Q J R Current (A) Current vs. Load Load (N)

Version: 20231020-K Type N = Normal Voltage 1 = 12V DC 2 = 24V DC 3 = 36V DC 4 = 48V DC 6 = 12V DC, thermal switch 5 = 24V DC, thermal switch Load & Speed See page 2 Stroke (mm) Retracted Length (mm) See page 2 See page 5 Front Attachment (mm) See page 6-7 1 = #45 Steel, slotless, hole 10.2 2 = #45 Steel, slotless, hole 12.8 3 = #45 Steel, U clevis, slot 8.2, depth 15.0, hole 10.2 4 = #45 Steel, U clevis, slot 8.2, depth 15.0, hole 12.8 5 = Stainless Steel, slotless, hole 10.2 6 = Stainless Steel, slotless, hole 12.8 7 = Stainless Steel, U clevis, slot 8.2, depth 15.0, hole 10.2 8 = Stainless Steel, U clevis, slot 8.2, depth 15.0, hole 12.8 9 = #45 Steel, slotless, hole 16.2 K = Rod end bearing, hole 12.8 1 = Two micro switches cut off the actuator at EOS 3 = Two micro switches send signal at EOS (signal type: normally closed) D = Two micro switches send signal at EOS (only for TID1) Direction of Rear Attachment (Counterclockwise) See page 7 Rear Attachment (mm) See page 6 1 = #45 Steel, slotless, hole 10.2 2 = #45 Steel, slotless, hole 12.8 3 = #45 Steel, U clevis, slot 8.2, depth 15.0, hole 10.2 4 = #45 Steel, U clevis, slot 8.2, depth 15.0, hole 12.8 5 = Stainless Steel, slotless, hole 10.2 6 = Stainless Steel, slotless, hole 12.8 7 = Stainless Steel, U clevis, slot 8.2, depth 15.0, hole 10.2 8 = Stainless Steel, U clevis, slot 8.2, depth 15.0, hole 12.8 9 = #45 Steel, slotless, hole 16.2 Adjustable Reed Switch Output Signal 0 = Without 1 = Reed switch*1, tinned leads 2 = Reed switch*2, tinned leads 0 = Without 1 = Mechanical Pot. N = NPN Hall sensor*2 P = PNP Hall sensor*2 IP Rating 1 = Without 6 = IP66M 7 = IP67 8 = IP68 9 = IP69K Cable Exit A1 / P1 Cable Length (mm) A1 / P1 Connector (mm) See page 7 01 = Tinned leads, unsheathed wire 50, stripped wire 10 0500 = 500 1000 = 1000 1500 = 1500 2000 = 2000 1 = Single cable P2 Cable Length (mm) P3 Cable Length (mm) P2 Connector P3 Connector 00 = Without 00 = Without 0000 = Without 0000 = Without N = Normal 0 = Sample packaging C = Standard package, US fumigated pallet (1219*1016) 1 = Standard package, EU fumigated pallet (1200*800) 2 = Standard package, EU fumigated pallet (1500*800) E = Standard package, US plywood pallet (1219*1016) 5 = Standard package, EU plywood pallet (1200*800) 6 = Standard package, EU plywood pallet (1500*800) Alternative Packaging (mm2) Function of Limit Switches See page 8

Retracted Length (mm) 1. Calculate A+B+C+D = Y 2. Retracted length needs to ≥ Stroke+Y Important notice: Depending on the attachments, the motor cover might interfere with the customer's device, when retracted length is between 225~318mm. Please confirm before placing order. Output Signal 0, 4, 5, N, P - 1 +18 Load and Speed K, G, H, M, N, J - F +13 P, Q, R +20 Stroke (mm) Load & speed type(N) F, K, G, H, M, N, J, P, Q, R 25~150 - 151~200 - 201~250 +10 251~300 +20 301~350 +30 351~400 +40 401~450 +50 451~500 +60 501~550 +70 551~600 +80 601~650 +90 651~700 +100 701~750 +110 751~800 +120 801~850 +130 851~900 +140 901~950 +150 951~1000 +160 Front Attach. Rear Attach. 1, 2, 5, 6 +200 +208 +205 3, 4, 7, 8 +207 +215 +212 9 +203 +211 +208 K +225 +233 +230

Rear Attachment (mm) 4 = #45 Steel, U clevis, slot 8.2, depth 15.0, hole 12.8 8 = Stainless Steel, U clevis, slot 8.2, depth 15.0, hole 12.8 5 = Stainless Steel, slotless, hole 10.2 9 = #45 Steel, slotless, hole 16.2 1 = #45 Steel, slotless, hole 10.2 6 = Stainless Steel, slotless, hole 12.8 2 = #45 Steel, slotless, hole 12.8 3 = #45 Steel, U clevis, slot 8.2, depth 15.0, hole 10.2 7 = Stainless Steel, U clevis, slot 8.2, depth 15.0, hole 10.2 15.9 ∅10.2 ∅25.4 15.9 ∅10.2 ∅25.4 55.9 ∅28.6 10.4 38.4 ∅28 ∅30 1 7. 2 ∅16.2 15.9 ∅12.8 ∅25.4 15.9 ∅12.8 ∅25.4 23.9 ∅10.2 ∅25.4 8.2 23.9 ∅12.8 ∅25.4 8.2 23.9 ∅10.2 ∅25.4 8.2 23.9 ∅12.8 ∅25.4 8.2 Front Attachment (mm) 4 = #45 Steel, U clevis, slot 8.2, depth 15.0, hole 12.8 1 = #45 Steel, slotless, hole 10.2 2 = #45 Steel, slotless, hole 12.8 3 = #45 Steel, U clevis, slot 8.2, depth 15.0, hole 10.2 ∅10.2 12.9 ∅34 ∅34 ∅10.2 12.9 ∅34 8.2 ∅34 ∅12.8 12.9 ∅34 ∅34 ∅12.8 12.9 ∅34 8.2 ∅34

8 = Stainless Steel, U clevis, slot 8.2, depth 15.0, hole 12.8 Front Attachment (mm) 5 = Stainless Steel, slotless, hole 10.2 6 = Stainless Steel, slotless, hole 12.8 7 = Stainless Steel, U clevis, slot 8.2, depth 15.0, hole 10.2 ∅10.2 12.9 ∅34 ∅34 ∅10.2 12.9 ∅34 8.2 ∅34 ∅12.8 12.9 ∅34 ∅34 ∅12.8 12.9 ∅34 8.2 ∅34 9 = #45 Steel, slotless, hole 16.2 K = Rod end bearing, hole 12.8 ∅34 ∅28 ∅22 14.5 2.5 ∅16.2 ø12.8 ø34ø34 ∅34 Direction of Rear Attachment (Counterclockwise) Hole Hole 90º 135º Hole 45º Hole 01 = Tinned leads, unsheathed wire 50, stripped wire 10 Connector (mm)

The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice. DC, Normal Port Function of Limit Switches Wire Color Wire Gauge (AWG) Position Feedback P1 Two Micro Switches Cut off The Actuator at EOS

  • RD 14 EXT+ EXT+ EXT+ EXT+
  • BK 14 RET+ RET+ RET+ RET+
  • RD 20 - V-out Vcc Vcc
  • ● WH 20 - V-in S1 S1
  • BU 20 - - S2 S2
  • BK 20 - GND GND GND
  • BN 20 - - - -
  • OG 20 - - - -
  • VT 20 - - - - P1 Two Micro Switches Send Signal at EOS
  • RD 14 EXT+ EXT+ EXT+ EXT+
  • BK 14 RET+ RET+ RET+ RET+
  • RD 20 COM COM Vcc Vcc
  • ● WH 20 EOS-extended EOS-extended S1 S1
  • BU 20 EOS-retracted EOS-retracted S2 S2
  • BK 20 - GND GND GND
  • BN 20 - V-in EOS-extended EOS-extended
  • OG 20 V-out EOS-retracted EOS-retracted
  • VT 20 - - COM COM Wire Definition