M8XV3-S2V2Z1-R

M8XV3 MSYSTEM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

MODEL: M8XV3 M8XV3 SPECIFICATIONS ES-5386 Rev.6 Page 1/4 http://www.m-system.co.jp/ Dual Output Super-mini Signal Conditioners Pico-M Series SIGNAL CONVERTER (PC programmable, CE) Functions & Features

• Converts a DC input into two isolated process signals
• PC programmable
• Space-saving, easy-to-maintain, multi-channel installation base MODEL: M8XV3-[1][2]-R[3]

ORDERING INFORMATION

• Code number: M8XV3-[1][2]-R[3] Specify a code from below for each of [1] through [3]. (e.g. M8XV3-S2V2V2-R/Q)
• Input range (e.g. 0 – 5 V DC)
• Output 1 / Output 2 (e.g. 1 – 5 V / 1 – 5 V DC) If no specifications are specified, model M8XV3-S2V2V2-R/Q will be shipped. [S2: 1 - 5 V DC, V2V2: 1 - 5 V DC / 1 - 5 V DC]
• Use Ordering Information Sheet (No. ESU-5469) to specify linearization data when the I/O signals are nonlinear. Linear data will be programmed if not otherwise specified.
• Specify the specification for option code /Q (e.g. /C01) [1] INPUT Current Z1: Range 0 – 50 mA DC (Input resistance 25 Ω) Voltage S1: Range -1 – +1 V DC (Input resistance 1 MΩ min.) S2: Range -10 – +10 V DC (Input resistance 1 MΩ min.) (Configurator software is used to change input over the described range of the selected suffix code. For changing between suffix codes, set the Input Range Selector on the side of unit before software adjustment.) [2] OUTPUT 1 / OUTPUT 2 V2Z1: Range -10 – +10 V DC / Range 0 – 20 mA DC V2V2: Range -10 – +10 V DC / Range -10 – +10 V DC (Configurator software is used to change output over the described range of the selected suffix code. For changing between suffix codes, set the Output Range Selector on the side of unit before software adjustment.) POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [3] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating

RELATED PRODUCTS

• Installation Base or Single Mount Base Socket (model: M8BSx) This unit must be mounted on dedicated base or socket.
• PC configurator software (model: JXCON) Downloadable at M-System’s web site. A dedicated cable is required to connect the module to the PC. Please refer to the internet software download site or the users manual for the PC configurator for applicable cable types. GENERAL SPECIFICATIONS Construction: Plug-in Mounting screw: M3 screw (torque 0.3 N·m) Housing material: Flame-resistant resin (black) Power supply: Via the Installation Base terminals (model: M8BSx) Isolation: Input to output 1 to output 2 to power Overrange output: Approx. -15 to +115 % Manual zero adjustments: -5 to +5 % (factory setting: 0 %) Manual span adjustments: 95 to 105 % (factory setting: 100 %) Programming: Downloaded from PC; input range, output range, zero and span, simulating output, lineraization, etc. Status indicator LED: Blinking patterns indicate different operating status of the transmitter. Configurator connection: 2.5 dia. miniature jack; RS-232-C level

MODEL: M8XV3 M8XV3 SPECIFICATIONS ES-5386 Rev.6 Page 2/4 http://www.m-system.co.jp/ INPUT SPECIFICATIONS ■ DC Current: 0 – 50 mA DC; Input resistor incoporated (If not specified, the input range is 4 – 20 mA DC.) Operational range: 0 – 70 mA DC Minimum span: 2 mA Offset: Lower range can be any specific value within the input range provided that the minimum span is maintained. ■ DC Voltage: -10 – +10 V DC Operational range: -11.5 – +11.5 V DC Minimum span: 10 mV for S1; 100 mV for S2 Offset: Lower range can be any specific value within the input range provided that the minimum span is maintained. If not specified, the input range is shown below. S1: 0 – 100 mV DC S2: 1 – 5 V DC OUTPUT SPECIFICATIONS ■ DC Current: 0 – 20 mA DC Operational range: 0 – 24 mA DC Minimum span: 1 mA Offset: Lower range can be any specific value within the output range provided that the minimum span is maintained. Load resistance: Output drive 6 V max. (e.g. 4 – 20 mA: 300 Ω [6 V ÷ 20 mA]) ■ DC Voltage: -10 – +10 V DC Operational range: -11.5 – +11.5 V DC Minimum span: 1 V Offset: Lower range can be any specific value within the output range provided that the minimum span is maintained. Load resistance: Output drive 1 mA max. If not specified, the output range is shown below. V2Z1: 1 – 5 V / 4 – 20 mA DC V2V2: 1 – 5 V / 1 – 5 V DC INSTALLATION Current consumption: Approx. 50 mA (70 mA for current output) Operating temperature: 0 to 55°C (32 to 131°F) Operating humidity: 30 to 95 %RH (non-condensing) Mounting: Installation Base (model: M8BSx) Weight: 70 g (2.5 oz) PERFORMANCE Overall accuracy: Input accuracy + output accuracy [gain ≤ 1] (inp. accuracy + out. accuracy) × gain [gain > 1] Inversely proportional to the span. Except the accuracy of input resistor. See CALCULATION EXAMPLES OF OVERALL ACURACY.

• Input accuracy: (% of max. input range)
• Output accuracy: (% of output range) 0 – 20 mA: ±0.04 % Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) of I/O range at 0 to 55°C [32 to 131°F] Response time: ≤ 0.9 sec. (0 – 90 %) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength:

1500 V AC @1 minute (input to output 1 or output 2 or

power to ground)

500 V AC @1 minute (output 1 to output 2 to power)

HOW TO CALCULATE THE ACCURACY ■ Overall Accuracy [Example] 1 – 5 V input, 1 – 5 V output Input Accuracy = Max. Range ÷ Input Span × Input Accuracy Output Accuracy = Max. Range ÷ Output Span × Output Accuracy Overall Accuracy = 0.05 + 0.1 = ±0.15 % STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EN 50581

MODEL: M8XV3 M8XV3 SPECIFICATIONS ES-5386 Rev.6 Page 3/4 http://www.m-system.co.jp/ EXTERNAL VIEWS ■ FRONT VIEW■ SIDE VIEW ■ BOTTOM VIEW Zero/Span Selector Input Range Selector UP Switch Status Indicator LED Configurator Jack DOWN Switch Output Range Selector V V L I I H S Z I I H V OFF ZS L V Input Range Selector (SW POSITION: RANGE) I / L: Z1 (0 – 50 mA DC) V / L: S1 (-1 – +1 V DC) Output Range Selector (SW POSITION: RANGE) I: V2Z1 (-10 – +10 V / 0 – 20 mA DC) Zero/Span Selector (SW POSITION: MODE) S: SPAN Center: OFF Z: ZERO Zero/Span is calibrated by using UP/DOWN switches when the calibration mode is set. Refer to the instruction manual for detailed procedures.

MODEL: M8XV3 M8XV3 SPECIFICATIONS ES-5386 Rev.6 Page 4/4 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS unit: mm (inch) I/O PINS 17.5(.69) 48 (1.89) 75 (2.95) 83 (3.27) SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Isolation Installation Base OUTPUT 1 OUTPUT 2 D A B C POWER Output Driver Output Driver INPUT Low Drift Amplifier Digital Computation ZERO/SPAN SELECTOR INPUT RANGE SELECTOR OUTPUT RANGE SELECTOR UP/DOWN SWITCHES CONFIGURATOR JACK STATUS Specifications are subject to change without notice.