M870 DSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

PROGRAMMABLE DISPLAY FOR USE IN VEHICLES AND OFF-HIGHWAY MACHINERY DEEP SEA ELECTRONICS LTD UK Highfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PH TELEPHONE +44 (0) 1723 890099 EMAIL sales@deepseaelectronics.com WEBSITE www.deepseaelectronics.com DEEP SEA ELECTRONICS INC USA

3230 Williams Avenue, Rockford, IL 61101-2668 USA

TELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708 EMAIL usasales@deepseaelectronics.com WEBSITE www.deepseaelectronics.com Deep Sea Electronics Ltd maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without prior notice. The contents are intended for guidance only Registered in England & Wales No.01319649 VAT No.316923457 055–199/03/21 (9) OVERVIEW DC SUPPLY

8 V DC to 32 V DC

< 1000 mA at 12 V and 24 V without external loads < 1500 mA at 12 V and 24 V with Htr. DISPLAY 800 px x 480 px 24 bit colour Optically bonded INPUTS/OUTPUTS (total) 4 inputs / 4 outputs INPUTS Configurable, Digital inputs (positive / negative) Analogue inputs (Voltage 0 V to 5 V, 0 V to

10 V, 0 V to 32 V, current 4 mA to 20 mA,

Ratiometric, Resistive, Frequency) OUTPUTS Configurable Digital Output High-Sided/Low-Sided INTERFACES CAN 1.2 CAN Interfaces 2.0 A/B, ISO11898 50 kbits/s... 1 Mbit/s CAN Open, SAE J1939 or Raw CAN ETHERNET

10 Mbit/s / 100 Mbit/s, Duplex

USB Host 2.0 (12 Mbit/s) DIMENSIONS 272 mm x 165 mm x 81 mm (W x H x D) 10.7” x 6.5” x 3.2” ( W x H x D) WEIGHT < 1 kg STORAGE TEMPERATURE RANGE -40 ˚ C to +85 ˚ C -40 ˚ F to +185 ˚ F OPERATING TEMPERATURE RANGE -30 ˚ C to +85 ˚ C -22 ˚ F to +185 ˚ F PROTECTION RATING IP67/NEMA 6 (with mating connectors) MOUNTING 8 x M5 bolts / RAM arm RELATED MATERIALS TITLE PART NO M870 Installation Instructions 053-187 M870 Installation and Operation Manual 057-246 M870 CODESYS Software Manual 057-320 M870 Qt Software Manual 057-321 KEY FEATURES / SUMMARY

  • Robust HMI/programmable display specifically designed for mobile applications
  • Optically bonded 7” colour screen for harsh environments
  • Capacitive touchscreen (M870-02 / M870-04 variants)
  • Powerful ARM Cortex A9 processor with 800 MHz clock speed
  • 512 MB of DDR3 SDRAM and 2 GB of NAND mass storage
  • 4 configurable inputs, 4 configurable digital outputs
  • Supports landscape and portrait orientation
  • 2 independent CAN interfaces, J1939, CAN open and Raw CAN
  • Ethernet interface for communication
  • Flexible user programming via CODESYS 3.5 or Qt
  • IP67 protection/NEMA 6
  • 2 camera inputs DSEControl®

Connector A 18 pin TE connectivity DT16- 18SA-K004 Connector C 18 pin TE connectivity DT16- 18SC-K004 Ethernet M12, D-coded 4 pole socket USB M12, B-coded 5 pole socket Digital Inputs Connector C Digital inputs configured high or low Pin 14, 15, 16, 17 High level voltage threshold > 6 V Low level voltage threshold < 2 V Analogue Voltage Inputs Connector C

0 V to 5 V programmable voltage range 0 V to 5 V Pin 14, 15, 16, 17

0 V to 10 V programmable voltage range 0 V to 10 V

0 V to 32 V programmable voltage range 0 V to 32 V

Voltage measurement resolution 12 bits Voltage measurement accuracy ± 1% FSD Voltage measurement input resistance ≥ 30 kΩ Voltage measurement sampling rate 500 Hz FSD = Full Scale Deflection Display Resolution, pixel 800 px x 480 px Colour 24 bit Format 7” diagonal Touchscreen Capacitive touch (M870-02 / M870-04 variants) Mounting Optically bonded Illumination LED (lifetime > 50,000 hrs) Supply Connector A Operating voltage 8 V DC to 32 V DC Pin 7 Unit power supply maximum current consumption, full backlight (no external loads) < 1000 mA at 12 V and 24 V Unit power supply maximum current consumption, full backlight and heater (no external loads) < 1500 mA at 12 V and 24 V Unit power supply current consumption after controlled shutdown has occurred due to the ignition being turned off < 5 mA at 24 V Fusing Connector A Unit power supply external protection fuse rating 3 A Pin 7 High current outputs supply input external fuse protection rating (i.e. sum of output currents from all outputs provided for by an individual supply to < external fuse rating in total)

10 A Pin 1

PC PBT alloy plastic resin Dimensions 140 mm x 230 mm x 60 mm (W x H x D) / 10.8” x 6.3” x 3.15” ( W x H x D) Weight < 1 kg Temperature Operating temperature -30 ˚ C to +85 ˚C / -22 ˚ F to +185 ˚ F Storage temperature -40 ˚ C to +85 ˚C / -40 ˚ F to +185 ˚ F Protection Rating IP67 (with mating connectors) DSEM870 Technical Data DSEControl® 055–199/03/21 (9)

Analogue Resistive Inputs Connector C Resistance measurement range 0 Ω to 3200 Ω Pin 14, 15, 16, 17 Resistance measurement source voltage 12 V maximum Resistance measurement current 1 mA Resistance measurement resolution 12 bits Resistance measurement accuracy ± 1% FSD Resistance measurement sampling rate 500 Hz FSD = Full Scale Deflection Analogue Ratiometric Inputs Connector C Voltage ratiometric measurement voltage range Pin 14, 15, 16, 17 Voltage ratiometric measurement Vref Supply/Vref Voltage ratiometric measurement Ratio of input pin to supply voltage Voltage ratiometric measurement accuracy ± 1% FSD FSD = Full Scale Deflection Frequency Inputs Connector C Frequency range 5 Hz to 30 KHz Pin 14, 15, 16, 17 Resolution 100 Hz at max. freq Accuracy 400 Hz at max. freq Maximum space voltage < 1.4 V Minimum mark voltage > 2 V Digital Outputs High Side Connector C Switching current 2 A Pin 2, 3, 4, 5 Digital output active high ‘ON’ state internal voltage drop at rated current < 100 mV Digital output active high ‘OFF’ state leakage current < 10 µA at 24 V Digital Outputs Low Side Connector C Switching current 2 A Pin 2, 3, 4, 5 Digital output active low ‘ON’ state maximum voltage at rated current < 100 mV Digital output active low ‘OFF’ state leakage current < 5 µA at 24 V Reference Voltage Connector C Reference voltage output Programmable 5 V or 10 V, 500 mA accuracy ±5% VRef GND Pin 18 Auxiliary Voltage Connector C

12 V auxiliary voltage max 100 mA Pin 13

Real time clock Standard RTC, powered by Super Cap, backup time ~800 hours DSEControl® DSEM870 Analogue Current Inputs Connector C Current measurement direction Current sink only Pin 14, 15, 16, 17 Current measurement ranges 0 mA to 20 mA 4 mA to 20 mA Current measurement resolution 12 bits Current measurement accuracy ± 1% FSD Current measurement input sink resistance 100 Ω ± 1% Current measurement sampling rate 500 Hz FSD = Full Scale Deflection 055–199/03/21 (9)

DSEControl® DSEM870 Camera Connector A Analogue video input (supported video standards: PAL & NTSC) 2 5, 6, 11, 12 CAN Interfaces Connector A Number of CAN ports 2 Pin 2, 3, 8, 9, 14, 15 Supported protocols J1939 CAN open Raw CAN Supported programmable baud rates 50 kbit/s, 125 kbit/s, 250 kbit/s, 500 kbit/s, 800 Mbit/s,

1 Mbit/s

Ethernet Interface M12, 4 pole Number of Ethernet ports 1 D-coded 4 pole socket Supported data rates 10/100 Mbit/s Supported protocols Modbus TCP CODESYS 3.5 USB Interface M12, 5 pole Number of USB host ports 1 B-coded, 5 pole socket Supported USB version 2 Speeds supported Full speed (12 Mbit/s) Device class supported 08 (Mass Storage) Supported filing system FAT32 Processor Technexion Freescale iMX6-SOLO Microcontroller ARM A9

800 MHz

CODESYS 3.5 (M870-01 / M870-02 / M870-03) SP12 Patch 0 Qt (M870-04) V 5.15 LED Status Colour Description Operation State None Device not powered N/A Off Green Unit powered up, application program loaded but not running Unit powered up, application program loaded and running Unit powered up, but no application program loaded Static

1 Hz flash

5 Hz flash

Amber Bootloader functioning normally, firmware present Firmware is at start-up Unit stopped due to a serious fault Bootloader is decrypting the downloaded image Bootloader is reading an image from the USB Static Static Static Red Fatal system/hardware fault - LEd may be driven directly by microcontroller error pin or firmware is in a fault condition Unit running with a fault, see CODESYS error flags or web tool. Static 055–199/03/21 (9)

CE marking Electromagnetic compatibility (EMC) noise immunity Electromagnetic compatibility (EMC) emission standard BS EN ISO 13766-1:2018 E11 marking Emission standard noise immunity with 100 V/m UN/ECE-R10 Electrical tests Pulse 1, severity level: IV; function state C Pulse 2a, severity level: IV; function state B Pulse 2b, severity level: IV; function state C Pulse 3a, severity level: IV; function state A Pulse 3b, severity level: IV; function state A Pulse 4, severity level: IV; function state B Pulse 5a, severity level: III; function state C ISO 7637-2 Climatic tests Damp heat, cyclic upper temperature 55 ˚C, number Damp heat, steady state test temperature 40 ˚C / 93% RH Test duration: 21 days Salt spray test severity level 3 (vehicle) EN 60068-2-30 EN 60068-2-78 EN 60068-2-53 Mechanical tests Test VII; vibration, random mounting location: vehicle body Vibration, sinusoidal 2000 Hz: 0.73 mm / 10g: 10 cycles/axis Bumps 30 g / 6 ms; 24,000 shocks ISO 16750-3 EN 60068-2-6 ISO 16750-3 Additional Hardware DSE Part Number Deutsch connector A, 18 way complete with pins 007-850 Deutsch connector C, 18 way complete with pins 007-851 M870 connector harness 016-167 M870 panel gasket 020-579 Ethernet programming cable 016-160 M12 to USB cable 016-161 M870 Variants DSE Part Number CODESYS (Standard) M870-01 CODESYS (Touchscreen) M870-02 CODESYS (Standard with WebVisu) M870-03 Qt (Touchscreen) M870-04 DSEControl® DSEM870 055–199/03/21 (9)

OUT PWM, H, L Output can be configured as a PWM, PWMi, digital high-side or digital low-side OUT H Output is digital high OUT H, L Output can be configured as a digital high-side or digital low side AIN Input can be configured to accept signals from positive digital, negative digital, 0 V to 10 V, 4 mA to 20 mA, ratiometric or resistive DIN, H, L, FREQ Input can be configured to accept signals from positive digital, negative digital or frequency A GND Ground connection for the analogue input channels PIN DESCRIPTION

1 EGU Supply GND

2 CAN1 GND

3 CAN2 GND

4 No connection

5 Camera 1 GND

6 Camera 2 GND

7 ECU Supply +VE

8 CAN1 H

9 CAN 2 H

10 No connection

11 Camera 1 signal

12 Camera 2 signal

13 Ignnition +VE (15)

14 CAN1 L

15 CAN2 L

16 No connection

17 No connection

18 No connection

M12 ‘D’ coded - 4 pin female USB Host M12 ‘B’ coded - 5 pin female Connector A Connector C PIN DESCRIPTION REF

1 Output supply +VE

2 OUT H, L QC001

3 OUT H, L QC002

4 OUT H, L QC003

5 OUT H, L QC004

6 VREF +

7 Output supply GND

8 No connection

9 No connection

11 No connection

12 Output supply GND

13 Aux 12 +VE Output

14 AIN, DIN H, L, FREQ IC001

15 AIN, DIN H, L, FREQ IC002

16 AIN, DIN H, L, FREQ IC003

17 AIN, DIN H, L, FREQ IC004

18 VREF GND

DSEControl® DSEM870 PROGRAMMABLE DISPLAY FOR USE IN VEHICLES AND OFF-HIGHWAY MACHINERY 055–199/03/21 (9)