M835

M835 DSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 5

Technical content

PROGRAMMABLE DISPLAY FOR USE IN VEHICLES AND OFF-HIGHWAY MACHINERY DEEP SEA ELECTRONICS LTD UK Highfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PH TELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303 EMAIL sales@deepseaelectronics.com WEBSITE www.deepseaelectronics.com DEEP SEA ELECTRONICS INC USA

3230 Williams Avenue, Rockford, IL 61101-2668 USA

TELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708 EMAIL usasales@deepseaelectronics.com WEBSITE www.deepseaelectronics.com Deep Sea Electronics Ltd maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without prior notice. The contents are intended for guidance only Registered in England & Wales No.01319649 VAT No.316923457 055-266/12/21(5) OVERVIEW DC SUPPLY

8 V DC to 32 V DC

< 1000 mA at 12 V and 24 V without external loads DISPLAY 320 px x 240 px 24 bit colour Optically bonded INPUTS (4) CONFIGURABLE INPUTS 1 to 4 Configurable as: digital, current, voltage, resistance

0 V to 10 V

0-3 kΩ OUTPUTS (3) DC OUTPUTS 1 to 3

1 A continuous at supply voltage

CAN Interface 2.0 A/B, ISO11898 50 kbits/s... 1 Mbit/s SAE J1939 or Raw CAN Configurable internal software 120 Ω resistor DIMENSIONS OVERALL (W x H x D) 112.5 mm x 115 mm x 49 mm PANEL CUT-OUT 80 mm / 3.15” Diameter TORQUE SETTING 8 Nm / 5.9 ft-lb WEIGHT < 1 kg STORAGE TEMPERATURE RANGE -40 ˚ C to +85 ˚ C -40 ˚ F to +185 ˚ F HEATED DISPLAY OPERATING RANGE Turns on at -25 ° C / -13 ° F Turns off at -5° C / 23 ° F OPERATING TEMPERATURE RANGE -40 ˚ C to +85 ˚ C -40 ˚ F to +185 ˚ F PROTECTION RATING IP67 / NEMA 6 (with mating connectors) RELATED MATERIALS TITLE PART NO. M835 Operators Manual 057-313 M835 Installation Instructions 053-250 KEY FEATURES / SUMMARY

• Robust HMI/programmable display specifically designed for mobile applications
• Optically bonded 3.5” colour screen for harsh environments
• Auto on / off heated display for use in low temperatures
• Powerful processor with Cortex M7 400 MHz clock speed
• 512 KB of SDRAM and 8 MB of flash storage
• 4 configurable inputs, digital and analogue capability
• 3 configurable digital outputs
• 1 VREF output (to power sensors)
• CAN interfaces, J1939 and Raw CAN
• PCAN interface for programming
• Flexible user programming via CODESYS 3.5
• IP67 protection / NEMA 6 ADDITIONAL HARDWARE Deutsch connector A, 18 way complete with pins E050 connector harness E050 configuration harness PCAN USB PC configuration interface DSE PART 007-850 016-176 016-177 016-179 DSEControl®

Connector A 18 pin TE connectivity DT16- 18SA-K004 Digital Inputs Connector A Digital inputs configured high or low Pin 5, 6, 12, 18 High level voltage threshold Configurable Low level voltage threshold Configurable Frequency Applicable PIN Pin 6 Minimum frequency measurement 1 Hz Maximum frequency measurement (M835-003-xx onwards) 150 Hz Maximum frequency measurement (M835-001-01 and M835-002-01) 50 Hz Minimum voltage for frequency measurement 8 V Maximum measurable voltage of input (Voltages above maximum measurable voltage are read as approx 12 V) Typical 12 V Maximum voltage of frequency signal As ECU supply voltage (Max 32 V) Pin 7 Duty cycle range for frequency measurement 25% - 75% typical. Refer to manual for more info Minimum rise / fall time for frequency measurement 1.25 ms @ 12 V / 0.5 ms @ 24 V Display Resolution, pixel 320 px x 240 px Colour 24 bit Format 3.5” diagonal Mounting Optically bonded Illumination LED (lifetime > 30,000 hrs) Supply Connector A Operating voltage 8 V DC to 32 V DC Pin 7 Unit power supply maximum current consumption, full backlight (no external loads) < 1000 mA at 12 V and 24 V Fusing Connector A Unit power supply external protection fuse rating 3 A Pin 7 Housing PC PBT alloy plastic resin Dimensions Overall (W x H x D) 112.5 mm x 115 mm x 49 mm (4.43” x 4.53” x 1.93”) Weight < 1 kg Temperature Operating temperature -40 ˚ C to +85 ˚C / -40 ˚ F to +185 ˚ F Storage temperature -40 ˚ C to +85 ˚C / -40 ˚ F to +185 ˚ F Protection Rating IP67 / NEMA 6 (mating connectors) DSEM835 Technical Data DSEControl® 055–266/12/21 (5) Analogue Voltage Inputs Connector A

0 V to 10 V programmable voltage range 0 V to 10 V Pin 5, 6, 12, 18

Voltage measurement resolution 12 bits Voltage measurement accuracy ± 1% FSD Voltage measurement input resistance ≥ 7.5 kΩ Voltage measurement sampling rate 500 Hz FSD = Full Scale Deflection

Analogue Resistive Inputs Connector A Resistance measurement range 0 Ω to 3200 Ω Pin 5, 6, 12, 18 Resistance measurement source voltage 12 V maximum Resistance measurement current 3 mA Resistance measurement resolution 12 bits Resistance measurement accuracy ± 1% FSD Resistance measurement sampling rate 500 Hz FSD = Full Scale Deflection Digital Outputs High Side Connector A Switching current 1 A Pin 14, 15, 16 Digital output active high ‘ON’ state internal voltage drop at rated current < 100 mV Digital output active high ‘OFF’ state leakage current < 120 µA at 24 V Reference Voltage Connector A Reference voltage output Programmable 5 V or 10 V, 100 mA accuracy ±5% VRef GND Pin 13 DSEControl® DSEM835 055–266/12/21 (5) Analogue Current Inputs Connector A Current measurement direction Current sink only Pin 5, 6, 12, 18 Current measurement ranges 0 mA to 20 mA 4 mA to 20 mA Current measurement resolution 12 bits Current measurement accuracy ± 1% FSD Current measurement input sink resistance 150 Ω ± 1% Current measurement sampling rate 500 Hz FSD = Full Scale Deflection CAN Interfaces Connector A Number of CAN ports 1 Pin 2, 3, 4 / 8, 9, 10 Supported protocols J1939 Raw CAN Supported programmable baud rates 50 kbit/s, 125 kbit/s, 250 kbit/s, 500 kbit/s, 800 Mbit/s,

1 Mbit/s

400 MHz

Electro Magnetic Compatibility Noise immunity Emission standard Road vehicles Road vehicles - electrical disturbances from conduction and coupling. Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines BS EN 6100-6-2 BS EN 6100-6-4 ISO 11452 ISO 7637-3: 2016 Electrical Safety Safety requirements for electrical equipment for measurement, control & laboratory use Part 1: General requirements Part 2-030: Particular requirements for testing measuring circuits BS EN 61010 BS EN 61010:2010 BS EN 61010-2-30: 2010 Electrical tests Road vehicles - environmental conditions and testing for electrical & electronic equipment Part 2: Electrical loads

4.6.3 Starting profile

4.6.4 Load dump

ISO 16750-2: 2012 Climatic tests Damp heat, cyclic upper temperature 55˚C, number Damp heat, steady state test temperature 40 ˚C / 93% RH EN 60068-2-30 EN 60068-2-78 Mechanical tests Part 2-6: Tests - Test Fc: Vibration (sinusoidal) Part 2-27: Tests - Test Ea: Shock EN 60068-2-6 EN 60068-2-27 Temperature Ab / Ae cold test -40 ˚ C (-40 ˚ F) Bb / Be dry heat +85 ˚ C (185 ˚ F) Chemical Chemical testing for electrical and electronic equipment - road vehicles ISO 16750-5 Degrees of protection provided by enclosures IP67 / NEMA 6 BS EN 60529 DSEControl® DSEM835 055–266/12/21 (5)

OUT H, L Output can be configured as digital high-side or digital low-side AIN Input can be configured to accept signals from positive digital, negative digital, 0 V to 10 V, 4mA to 20 mA, ratiometric, resistive or frequency A GND Ground connection for the analogue input channels PIN DESCRIPTION

1 Batt GND

2 CAN Screen

3 CAN L In

4 CAN H In

5 Input 4

6 Input 1

7 VDC Batt +

8 CAN Screen

9 CAN L Out

10 CAN H Out

11 GND

12 Input 2

13 VREF GND

14 Output 1

15 Output 2

16 Output 3

17 VREF Out

18 Input 3

DSEControl® DSEM835 PROGRAMMABLE DISPLAY FOR USE IN VEHICLES AND OFF-HIGHWAY MACHINERY 055–266/12/21 (5) 112.5 mm ( 4.43 " ) 115 mm ( 4.53 " ) 80 mm ( 3.15 " ) 49 mm ( 1.93 " ) 74 mm ( 2.91 " ) 82 mm ( 3.23 " ) 76 mm ( 2.99 " )