M81713FP

M81713FP MITSUBISHI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Mar. 2006

APPLICATIONS

MOSFET and IGBT module inverter driver for PDP, HID lamp, refrigerator, air-conditioner, washing machine, AC- servomotor and general purpose.

FEATURES

¡HALF BRIDGE DRIVER ¡SINGLE INPUT TYPE ¡INTERNALLY SET DEADTIME ¡UNDERVOLTAGE LOCKOUT ¡SOP-8 PACKAGE

DESCRIPTION

M81713FP is high voltage Power MOSFET and IGBT mod- ule driver for half bridge applications.BLOCK DIAGRAM PIN CONFIGURATION (TOP VIEW) Outline:8P2S NC:NO CONNECTION MITSUBISHI SEMICONDUCTORS <HVIC> M81713FP HIGH VOLTAGE HALF BRIDGE DRIVER 1. VCC 2. IN 3. GND 4. LO 8. V B 7. HO 6. VS 5. NC 8 VB 7 HO 6 VS VCC 4 LO

3 GND

R S RQ VREG UV DETECT FILTER PULSE GEN UV DETECT FILTER

Mar. 2006 V V V V V V V V/ns W mW/°C °C/W V V V V V V V V S+10 V S V S+20 500 VB VCC VCC ABSOLUTE MAXIMUM RATINGS (Ta = 25°C unless otherwise specified) High Side Floating Supply Absolute Voltage High Side Floating Supply Offset Voltage High Side Floating Supply Voltage High Side Output Voltage Low Side Fixed Supply Voltage Low Side Output Voltage Logic Input Voltage Symbol UnitParameter T est conditions Limits Min. Typ. Max. V B > 10V VBS = VB–VS VB VS VBS VHO VCC VLO VIN –0.5 ~ 624 VB–24 ~ VB+0.5 –0.5 ~ 24 VS–0.5 ~ VB+0.5 –0.5 ~ 24 –0.5 ~ VCC+0.5 –0.5 ~ VCC+0.5 ±50 0.55 5.5 –20 ~ 125 –20 ~ 100 –40 ~ 125 V BS = VB–VS Ta = 25°C, On Board Ta > 25°C, On Board High Side Floating Supply Absolute Voltage High Side Floating Supply Offset Voltage High Side Floating Supply Voltage High Side Output Voltage Low Side Fixed Supply Voltage Low Side Output Voltage Logic Input Voltage Allowable Offset Voltage Transient Package Power Dissipation Linear Derating Factor Junction-Case Thermal Resistance Junction Temperature Operation Temperature Storage Temperature VB VS VBS VHO VCC VLO VIN dVS/dt Pd K q Rth(j-c) Tj Topr Tstg Symbol Parameter Test conditions Ratings Unit RECOMMENDED OPERATING CONDITIONS MITSUBISHI SEMICONDUCTORS <HVIC> M81713FP HIGH VOLTAGE HALF BRIDGE DRIVER THERMAL DERATING FACTOR CHARACTERISTIC (MAXIMUM RATING) Package Power Dissipation Pd (W) 0.2 0.4 0.7 0.1 0.3 0.5 0.6 25 50 100 75 125 150 Temperature Ta (°C) * For proper operation, the device should be used within the recommended conditions.

Mar. 2006 MITSUBISHI SEMICONDUCTORS <HVIC> M81713FP HIGH VOLTAGE HALF BRIDGE DRIVER µA mA mA V V V V µA µA V V µs V V µs mA mA Ω Ω µs V ns µs µs ns ns ns ns 0.2 13.8 2.1 0.6 8.0 0.5 8.0 0.5 0.5 300 0.6 0.1 0.2 0.5 14.4 3.0 1.5 8.9 0.7 7.5 8.9 0.7 7.5 –500 500 0.9 0.15 1.0 0.5 0.75 0.1 4.0 2.0 9.8 9.8 1.00 1.2 0.2 180 180 180 180 Floating Supply Leakage Current V BS Standby Current VCC Standby Current High Level Output Voltage Low Level Output Voltage High Level Input Threshold Voltage Low Level Input Threshold Voltage High Level Input Bias Current Low Level Input Bias Current V BS Supply UV Reset Voltage VBS Supply UV Hysteresis Voltage VBS Supply UV Filter Time VCC Supply UV Reset Voltage VCC Supply UV Hysteresis Voltage VCC Supply UV Filter Time Output High Level Short Circuit Pulsed Current Output Low Level Short Circuit Pulsed Current Output High Level On Resistance Output Low Level On Resistance Dead Time LO Turn-Off to HO Turn-On & HO Turn-Off to LO Turn-On Power On Reset Voltage Power On Reset Filter Time Turn-On Propagation Delay Turn-Off Propagation Delay High Side Turn-On Rise Time High Side Turn-Off Fall Time Low Side Turn-On Rise Time Low Side Turn-Off Fall Time Symbol UnitParameter T est conditions Limits Min. Typ.* Max. VB = VS = 600V IN = 0V IN = 0V IO = 0A, LO, HO IO = 0A, LO, HO HIN, LIN HIN, LIN VIN = 5V VIN = 0V VO = 0V, PW < 10µs VO = 15V, PW < 10µs IO = –200mA, ROH = (VOH–VO)/IO IO = 200mA, ROL = VO/IO CL = 1000pF between HO-VS, LO-GND CL = 1000pF between HO-VS, LO-GND CL = 1000pF between HO-VS, LO-GND CL = 1000pF between HO-VS CL = 1000pF between HO-VS CL = 1000pF between LO-GND CL = 1000pF between LO-GND IFS IBS ICC VOH VOL VIH VIL IIH IIL VBSuvr VBSuvh tVBSuv VCCuvr VCCuvh tVCCuv IOH IOL ROH ROL tDEAD VPonr tPonr(FIL) tdLH tdHL trH tfH trL tfL ELECTRICAL CHARACTERISTICS (Ta = 25°C, VCC = VBS ( = VB–VS) = 15V, unless otherwise specified) * Typ. is not specified. INPUT/OUTPUT TIMING DIAGRAM IN HO LO tdLH trH tfHtfL trL 50% 50% 90% 90% 90% 90% 10% 10% 10% 10% tdHL tDEAD tDEAD tdLH tdHL

Mar. 2006 MITSUBISHI SEMICONDUCTORS <HVIC> M81713FP HIGH VOLTAGE HALF BRIDGE DRIVER UV SEQUENCE 3.Allowable Supply Voltage Transient It is recommended that supplying V CC firstly and supplying V BS secondly. In the case of shutting off supply voltage, it is recommended to shut off V BS firstly and to shut off V CC secondly. At the time of starting V CC and V BS, power supply should be increased slowly (below 50V/ µs). If it is increased rapidly, output signal (HO or LO) may be “H”. VCC UV RESET UV TRIP UV TRIP UV TRIP UV RESET UV TRIP VPonr VPonr VPonr tVCCuv tVBSuv tVCCuv UV RESET UV RESET VB IN HO LO UV RESET UV TRIP 1.Input/Output Logic: HO has positive logic with reference to IN. LO has negative logic with reference to IN. 2.Logic During UV (V CC, VBS) Error HO outputs “L” Level as long as UV error for VCC is detected. HO responds to IN if VCC exceeds VCC UV reset level. Error Signal HO LO LO is locked at “L” level as long as UV error for VCC is detected. After V CC exceeds V CC UV reset level, the lock for LO is removed and responds to IN signal. UV error (VCC) * IF UV error for VCC is detected when HO is in “H” level and the falling speed of VCC is exceeds 0.03V/µs, the off signal for HO might not be transmitted from low side to high side and then HO stays “H”. UV error (VBS) HO is locked at “L” level as long as UV error for VBS is detected. After V BS exceeds V BS UV reset level, the lock for HO is removed following an “L” state of the IN signal, and then HO responds to the input. LO is independent of VBS to respond to IN.

Mar. 2006 MITSUBISHI SEMICONDUCTORS <HVIC> M81713FP HIGH VOLTAGE HALF BRIDGE DRIVER Ponr (Power On Reset) SEQUENCE PACKAGE OUTLINE VCC UV RESET UV TRIP UV RESET UV RESET UV TRIP UV TRIP UV TRIP UV TRIP UV TRIP VPonr VPonr VPonrtPonr(FIL) tPonr(FIL) UV RESET UV RESET VB IN HO LO tPonr(FIL) Symbol Min Nom Max A b c D E HE L y Dimension in Millimeters 0.05 – – –1 . 5– 0.35 0.4 0.5 0.13 0.15 0.2 4.8 5.0 5.2 4.2 4.4 4.6 –1 . 2 7 – 5.9 6.2 6.5 0.2 0.4 0.6 –0 . 9– –– 0 . 1 0° –1 0 ° –0 . 7 6 – –5 . 7 2 – 1.27 – – –– 1 . 9 e 8 5 HE E D e y F A A2 A1 L c Detail F e b2 Recommended Mount Pad z Z1 Detail G x –Z1 0.595 0.745 0.25 z b x M G