M81016FP | DigiCamel IC Datasheet

Online Datasheet

Read M81016FP online.

M81016P MITSUBISHI | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 8

Technical content

Oct.2004 PIN CONFIGURATION (TOP VIEW) MITSUBISHI SEMICONDUCTOR <MOS-ARRAY> M81016P/FP/KP OCTAL D-TYPE FLIP-FLOP DRIVER WITH CLEAR

DESCRIPTION

M81016 is octal D-type flip-flop driver by 20-pin package. It has 8 same circuit units which is composed of D-type flip-flop logic circuit and high voltage NchMOS output transistor. M81016 has a common direct clear input and a common clock input.

FEATURES

G Lineup with three packages G High breakdown voltage (BV DSX ≥ 40V) G Drain output current (I DS(max) = 200mA) G With input protection diodes G Pin assignment of input-output flow through G Wide operating temperature range (Ta = –40 to +85 °C) APPLICATION LED drive FUNCTION The common direct clear input and common clock input are connected to every circuit unit by the same way. Signal at the D inputs is transferred to Y outputs by D-type flip-flops on the positive-going edge of the clock pulse. If CLR is set to “L”, outputs Y1-Y8 will be altogether set to “H” regardless of D1-D8 and CLK. The maximum drain current of an output is 200mA. The maximum between drain-source is 40V. Moreover, M81016FP/KP can save space with mini-flat package. LOGIC DIAGRAM (POSITIVE LOGIC) CLR CLK VDD GND INPUT OUTPUT Package type 20P4B(P) 20P2N-A(FP) 20P2E-A(KP) D CK R Q D CK R Q D CK R Q D CK R Q D CK R Q D CK R Q VDD GND D CK R Q CLR CLK D CK R Q

Oct.2004 MITSUBISHI SEMICONDUCTOR <MOS-ARRAY> M81016P/FP/KP OCTAL D-TYPE FLIP-FLOP DRIVER WITH CLEAR FUNCTION TABLE (EACH CHANNEL) H : High level L : Low level X : Irrelevant OUTPUT : YINPUT CLR L H H H H CLK X D X L H X X H H L Latched Latched L TIMING DIAGRAM Supply voltage Drain-to-source voltage Input voltage Drain output current Power dissipation Operating temperature Storage temperature V V V mA W –0.5 ~ +40 –0.5 ~ V DD 200 1.47 1.10 0.68 –40 ~ +85 –55 ~ +125 RatingsSymbol Parameter Conditions Unit ABSOLUTE MAXIMUM RATINGS (Unless otherwise noted, Ta = –40 ~ +85°C) VDD VDS VI IDS Pd Topr Tstg M81016P M81016FP M81016KP RECOMMENDED OPERATING CONDITIONS (Unless otherwise noted, Ta = –40 ~ +85°C) V V V V Parameter 4.5 0.7VDD Limits min typ maxSymbol Unit VDD VDS VIH VIL Supply voltage Drain-to-source voltage “H” input voltage “L” input voltage Drain output current (Current per 1 circuit when 8 circuits are com- ing on simultaneously) 5.0 5.5 V DD 0.3VDD 200 135 200 120 200 V DD 500 IDS Duty Cycle no more than 45% Duty Cycle no more than 100% Duty Cycle no more than 34% Duty Cycle no more than 100% Duty Cycle no more than 18% Duty Cycle no more than 100% V DD = 4.5V VDD = 4.5V VDD = 4.5V VDD = 4.5V VDD = 4.5V Conditions VIN tr,t f tsu th tw f P FP KP Input voltage Rise time, Fall time, drain output Setup time before CLK ↑ Hold time, data after CLK ↑ Pulse duration Clock frequency mA V ns ns ns ns MHz D CLR CLK Y GND GND GND VOH VOL Ta = 25°C, when mounted on board Output, H Current per circuit output, L

Oct.2004 MITSUBISHI SEMICONDUCTOR <MOS-ARRAY> M81016P/FP/KP OCTAL D-TYPE FLIP-FLOP DRIVER WITH CLEAR 0.002 0.005 0.005 0.005 0.005 0.25 0.51 2.5 V (BR)DSX IDSX IIH IIL V µA µA µA 0.38 0.77 3.8 Symbol UnitParameter Test conditions Limits min typ max Drain-source breakdown voltage Drain-source leakage current “H” input current “L” input current I DS = 1mA VDS = 40V VDD = 5.5V, VI = 5.5V VDD = 5.5V, VI = 0V VDD = 5.5V VI = 5.5V or 0V IDS = 100mA, VDD = 4.5V IDS = 200mA, VDD = 4.5V IDS = 100mA, VDD = 4.5V ELECTRICAL CHARACTERISTICS (Unless otherwise noted, VDD = 5V, Ta = 25°C) ICC VDS RDS(on) Supply current “L” output voltage Drain-source on-state resistance µA V Ω ns ns ns ns Symbol UnitParameter Test conditions Limits min typ max Low-level to high-level and high-level to low-level output transition time tTLH tTHL tPLH tPHL CL = 30pF (Note 1) SWITCHING CHARACTERISTICS (VDD = 5V, Ta = 25°C) Low-level to high-level and high-level to low-level output propagation time (CLK) All outputs off All outputs on Low-level to high-level output propagation time (CLR)tPLH(R) — 35 — ns

Oct.2004 MITSUBISHI SEMICONDUCTOR <MOS-ARRAY> M81016P/FP/KP OCTAL D-TYPE FLIP-FLOP DRIVER WITH CLEAR TIMING DIAGRAM NOTE 1 TEST CIRCUIT PG RL OUTPUT CL Y CLR D GND VDD VDD VCC CLKPG (1) Pulse generator (PG) characteristics : PRR = 1MHz, Duty Cycle = 50%, tr = 6ns, tf = 6ns, Zo = 50Ω , VI = 5V (2) Output conditions : RL = 240Ω , VCC = 24V, VDD = 5V (3) Electrostatic capacity CL includes floating capacitance at connections and input capacitance at probes. 50% D CLK 50% Y 10% 90% 50% 10% 90% tTLHtTHL GND GND VCC VOL tPLHtPHL 50% SWITCHING TIMES INPUT SETUP AND HOLD WAVEFORMS 50%50% CLK GND tsu D th tw tr tf 50% 10% 90% 10% 90% GND 50%

Oct.2004 MITSUBISHI SEMICONDUCTOR <MOS-ARRAY> M81016P/FP/KP OCTAL D-TYPE FLIP-FLOP DRIVER WITH CLEAR TYPICAL CHARACTERISTICS Ta=25°C VDD=4.5V 10111 0 2 2 10335 723 5 723 5 7 DUTY CYCLE-DRAIN CURRENT CHARACTERISTICS (M81016P) DRAIN CURRENT IDS (mA) 200 q~u i q~e r t y u i q~w e t r y u i q~t y u i 160 120 008 0 604020 100 DRAIN CURRENT IDS (mA) DUTY CYCLE (%) THERMAL DERATING FACTOR CHARACTERISTICS DRAIN-SOURCE ON-STATE RESISTANCE VS DRAIN CURRENT CHARACTERISTICS POWER DISSIPATION Pd (W) AMBIENT TEMPERATURE Ta (°C) 0 25 50 75 85 100 2.0 1.5 1.0 0.5 0.764 0.572 0.354 M81016P M81016FP M81016KP 200 160 120 008 0 604020 100 200 160 120 008 0 604020 100 200 160 120 008 0 604020 100 DUTY CYCLE-DRAIN CURRENT CHARACTERISTICS (M81016P) DRAIN CURRENT IDS (mA) DUTY CYCLE (%) DUTY CYCLE-DRAIN CURRENT CHARACTERISTICS (M81016FP) DRAIN CURRENT IDS (mA) DUTY CYCLE (%) DUTY CYCLE-DRAIN CURRENT CHARACTERISTICS (M81016FP) DRAIN CURRENT IDS (mA) DUTY CYCLE (%) Ta=–40°C Ta=85°C The drain current values represent the current per circuit. Repeated frequency ≥ 10Hz The value the circle represents the value of the simultaneously-operated circuit. Ta=85°C DRAIN-SOURCE ON-STATE RESISTANCE RDS(ON) (Ω ) The drain current values represent the current per circuit. Repeated frequency ≥ 10Hz The value the circle represents the value of the simultaneously-operated circuit. Ta=25°C The drain current values represent the current per circuit. Repeated frequency ≥ 10Hz The value the circle represents the value of the simultaneously-operated circuit. Ta=25°C The drain current values represent the current per circuit. Repeated frequency ≥ 10Hz The value the circle represents the value of the simultaneously-operated circuit. Ta=85°C

Oct.2004 MITSUBISHI SEMICONDUCTOR <MOS-ARRAY> M81016P/FP/KP OCTAL D-TYPE FLIP-FLOP DRIVER WITH CLEAR 80–20–40 40 20 10006 0 AMBIENT TEMPERATURE Ta (°C) SWITCHING TIME (ns) DRAIN CURRENT IDS (mA) SWITCHING TIME (ns) 100 101 102 103 101 2 102 2 10333 55 77 SWITCHING TIME-DRAIN CURRENT CHARACTERISTICS SWITCHING TIME-AMBIENT TEMPERATURE CHARACTERISTICS tTLH tTHL tPLH tPHL q~e y t r u i 200 160 120 008 0 604020 100 DUTY CYCLE-DRAIN CURRENT CHARACTERISTICS (M81016KP) DRAIN CURRENT IDS (mA) DUTY CYCLE (%) q t r e w y iu 200 160 120 008 0 604020 100 DUTY CYCLE-DRAIN CURRENT CHARACTERISTICS (M81016KP) DRAIN CURRENT IDS (mA) DUTY CYCLE (%) RL=240Ω ,VCC=24V,VDD=5V VCC=24V,VDD=5V,Ta=25°C tTHL tTLH tPLH,tPLH(R) tPHL The drain current values represent the current per circuit. Repeated frequency ≥ 10Hz The value the circle represents the value of the simultaneously-operated circuit. Ta=85°C The drain current values represent the current per circuit. Repeated frequency ≥ 10Hz The value the circle represents the value of the simultaneously-operated circuit. Ta=25°C

Oct.2004 MITSUBISHI SEMICONDUCTOR <MOS-ARRAY> M81016P/FP/KP OCTAL D-TYPE FLIP-FLOP DRIVER WITH CLEAR SDIP20-P-300-1.78 Weight(g) JEDEC Code 1.0 20P4B Plastic 20pin 300mil SDIP Symbol Min Nom Max A b c E D L Dimension in Millimeters A1 0.51 – – – 3.3 – 0.38 0.48 0.58 0.9 1.0 1.3 0.22 0.27 0.34 18.8 19.0 19.2 6.15 6.3 6.45 – 1.778 – –7 . 6 2 – 3.0 – – 0° –1 5 ° –– 4 . 5 e 20 11 101 E c A2A1 b b1e LA SEATING PLANE D Lead Material Alloy 42/Cu Alloy SOP20-P-300-1.27 Weight(g) JEDEC Code 0.26 Cu Alloy 20P2N-A Plastic 20pin 300mil SOP Symbol Min Nom Max A b c D E L y Dimension in Millimeters HE .350 .180 .512 .25 .57 .40 .271 .10 .81 .40 .20 .612 .35 .271 .87 .60 .251 .627 .20 .12 .50 .250 .712 .45 .18 .80 .10 b2 – .760 – 0° – 8° e 20 11 101 HE E D e y F A A2 A1 L c e b2 Recommended Mount Pad Detail FDetail G z x –Z1 0.585 0.735 0.25 z b x M G

Oct.2004 MITSUBISHI SEMICONDUCTOR <MOS-ARRAY> M81016P/FP/KP OCTAL D-TYPE FLIP-FLOP DRIVER WITH CLEAR SSOP20-P-225-0.65 Weight(g) JEDEC Code 0.08 Alloy 42 20P2E-A Plastic 20pin 225mil SSOP Symbol Min Nom Max A b c D E L y Dimension in Millimeters HE .170 .130 .46 .34 .26 .30 .01 .10 .151 .220 .150 .56 .44 .650 .46 .50 .01 .85 .20 .451 .320 .20 .66 .54 .66 .70 .10 b2 – .350 – 0° – 10° e 20 11 101 HE E D e y F A A2 A1 L c e b2 Recommended Mount Pad Detail F x –Z1 0.325 0.475 0.13 z G b x M Detail G z

Product Information

M81016FP specifications and overview.

Summary

OCTAL D-TYPE FLIP-FLOP DRIVER WITH CLEAR

Description

OCTAL D-TYPE FLIP-FLOP DRIVER WITH CLEAR

Source title M81016FP Datasheet(PDF) - Mitsubishi Electric Semiconductor

Related Parts

More parts from the same family.

Browse manufacturer