M80BS8 MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

MODEL: M80BS-8 M80BS-8 SPECIFICATIONS ES-5398 Rev.2 Page 1/3 http://www.m-system.co.jp/ Super-mini Signal Conditioners M80 Series INSTALLATION BASE (8 positions) Functions & Features

  • Holds up to 8 modules of M80 series signal conditioners
  • Distributes power from a common power source; individual power wiring not required
  • Requires only a limited wiring work within an instrumentation panel MODEL: M80BS-8[1][2]-R

ORDERING INFORMATION

  • Code number: M80BS-8[1][2]-R Specify codes from below for each of [1] and [2]. (e.g. M80BS-811-R) [1] I/O TYPE 1: Input (M80YV, etc.) 2: Output (M80YS, etc.) [2] CONNECTION 1: CN1 3M Company 3428-6002 LCPL CN2 Without 2: CN1 3M Company 3428-6002 LCPL CN2 3M Company 3428-6002 LCPL POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

RELATED PRODUCTS

  • Connector terminal block (model: CNT)
  • Special cable (model: MCN201) GENERAL SPECIFICATIONS Capacity: 8 positions Connection Power input: M3 screw terminals (torque 0.6 N·m) I/O teminal: M3 screw terminals (torque 0.6 N·m) I/O connector: 3M Company 3428-6002 LCPL Screw terminal: Nickel-plated steel Housing material: Flame-resistant resin (gray) Isolation: Input to output to power to FG Power indicator LED: Turns On when power is supplied INSTALLATION Current consumption: ≤ 0.5 A Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 5 to 95 %RH (non-condensing) Mounting: Surface or DIN rail Weight: 250 g (0.55 lb) PERFORMANCE Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 1000 V AC @1 minute (input to output to power or FG) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EN 50581

MODEL: M80BS-8 M80BS-8 SPECIFICATIONS ES-5398 Rev.2 Page 2/3 http://www.m-system.co.jp/ CONNECTION DIAGRAM POWER Ch.1 INPUT TERMINAL *1 OUTPUT CONNECTOR *2 ■ MODEL: M80BS-81(Input)

  • CONNECTION DIAGRAM *1 Terminal A: positive input, Terminal B: negative input *2 CN2 is not provided for M80BS-811 Note: Use shielded cables for I/O wiring. Ch.8 INPUT TERMINAL *1 CN1 CN2 FG A B C A B C Ch.1 OUTPUT TERMINAL *1 INPUT CONNECTOR *2 ■ MODEL: M80BS-82(Output)
  • CONNECTION DIAGRAM *1 Terminal A: positive output, Terminal B: negative output *2 CN2 is not provided for M80BS-821 Note: Use shielded cables for I/O wiring. Ch.8 OUTPUT TERMINAL *1 CN1 CN2 A B C A B C POWER FG
  • CONNECTOR PIN ASSIGNMENT 0VUQVUDPOOFDUPS.$PNQBOZ 3428-6002 CN10VUQVU CN20VUQVU PIN NO. ASSIGNMENT PIN NO. ASSIGNMENT 1 FG 11 ch.5 – 2 FG 12 ch.5 + 3 N.C. 13 ch.4 – 4 N.C. 14 ch.4 + 5 ch.8 – 15 ch.3 – 6 ch.8 + 16 ch.3 + 7 ch.7 – 17 ch.2 – 8 ch.7 + 18 ch.2 + 9 ch.6 – 19 ch.1 – 10 ch.6 + 20 ch.1 +
  • CONNECTOR PIN ASSIGNMENT *OQVUDPOOFDUPS.$PNQBOZ 3428-6002 CN1*OQVU CN2*OQVU PIN NO. ASSIGNMENT PIN NO. ASSIGNMENT 1 Power output – 11 ch.5 – 2 Power output – 12 ch.5 + 3 Power output + 13 ch.4 – 4 Power output + 14 ch.4 + 5 ch.8 – 15 ch.3 – 6 ch.8 + 16 ch.3 + 7 ch.7 – 17 ch.2 – 8 ch.7 + 18 ch.2 + 9 ch.6 – 19 ch.1 – 10 ch.6 + 20 ch.1 +

MODEL: M80BS-8 M80BS-8 SPECIFICATIONS ES-5398 Rev.2 Page 3/3 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 67 (2.64) 63 (2.48) 78 (3.07) 41 (1.61) 154 (6.06) 170 (6.69) 161.6 (6.36) CH1 CH2 CH3 CH4 CH5 CH6 CH7CN1 CN2 CH8 FG NC 1B 2A 2C + - 1A 1C 2B 3B 4A 4C 5B 6A 3A 3C 4B 5A 5C 6C 7B 8A 8C 6B 7A 7C 8B I/O Connectors * 28 -M3 I/O TERMINAL SCREWS 6.1(.24) * CN2 is not provided for M80BS-811 or M80BS-821. 7 (.28) Power indicator LED 5 (.2) 2 - 4.3 dia. 4 deep (2 - 1.17 dia. 0.16 deep) DIN RAIL 35mm wide MOUNTING REQUIREMENTS unit: mm (inch) 2-M4 SCREW 161.6 (6.36) Specifications are subject to change without notice.