M670GS

LTW-M670GS TO-GRACE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 11

Technical content

Features

• Package in 8mm tape on 7" diameter reels. * Compatible with automatic placement equipment. * Compatible with infrared and vapor phase reflow solder process. * EIA STD package. * I.C. compatible. * Meet green product and Pb-free(According to RoHS) Package Dimensions Part No. Lens Color Source Color LTW-M670GS Yellow InGaN White Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2 mm (.008") unless otherwise noted. Part No. : LTW-M670GS Page : 1 of 11 BNS-OD-C131/A4 香港至恩科技有限公司 www.to-grace.com 公司授权代理销售LITE-ON:光耦，贴片LED灯等 进口原装，现货供应，价格优势，技术支持 电话：0755-83464948 传真：0755-83464076

A ll data sheet.com LITE-ON TECHNOLOGY CORPORATION P r o p e r t y o f L i t e - O n O n l y Absolute Maximum Ratings at Ta=25 ℃℃ ℃℃ Parameter LTW-M670GS Unit Power Dissipation 120 mW Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) 100 mA DC Forward Current 30 mA Reverse Voltage 5 V Operating Temperature Range -30℃ to + 100℃ Storage Temperature Range -40℃ to + 100℃ Wave Soldering Condition 260℃ For 5 Seconds Suggest IR Reflow Condition : IR-Reflow Soldering Profile for lead free soldering (Acc. to J-STD-020B) Part No. : LTW-M670GS Page : 2 of 11 BNS-OD-C131/A4

A ll data sheet.com LITE-ON TECHNOLOGY CORPORATION P r o p e r t y o f L i t e - O n O n l y Electrical Optical Characteristics At Ta=25℃℃ ℃℃ Parameter Symbol Part No. LTW- Min. Typ. Max. Unit Test Condition Luminous Intensity IV M670GS 1500 1600 mcd IF = 20mA Note 1, 2, 5 Luminous Flux Φ V M670GS 4600 mlm IF = 20mA Note 1, 2, 5 Viewing Angle 2θ1/2 M670GS 120 deg Fig.6 x 0.295 Chromaticity Coordinates y M670GS 0.288 IF = 20mA Note 3, 5 Fig.1 Forward Voltage V F M670GS 3.0 3.0 3.6 V IF = 20mA ESD-Withstand Voltage ESD M670GS 2K V HBM Note: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. 2. Iv classification code is marked on each packing bag. 3. The chromaticity coordinates (x, y) is derived from the 1931 CIE chromaticity diagram. 4. Caution in ESD: Static Electricity and surge damages the LED. It is recommended using a wrist band or anti-electrostatic glove when handling the LED. All devices, equipment and machinery must be properly grounded. 5. CAS140B is the test standard for the chromaticity coordinates (x, y) & IV. 6. The chromaticity coordinates (x, y) guarantee should be added ± 0.01 tolerance. Part No. : LTW-M670GS Page : 3 of 11 BNS-OD-C131/A4

A ll data sheet.com LITE-ON TECHNOLOGY CORPORATION P r o p e r t y o f L i t e - O n O n l y Bin Code List Part No. : LTW-M670GS Page : 4 of 11 BNS-OD-C131/A4 V F Spec. Table Forward Voltage (V) at IF = 20mA VF Bin Min. Max. V1 3.0 3.1 V2 3.1 3.2 V3 3.2 3.3 V4 3.3 3.4 V5 3.4 3.5 V6 3.5 3.6 Tolerance on each Forward Voltage bin is +/-0.10 volt IV Spec. Table IV (mcd) at IF = 20mA Luminous Flux (mlm) IV Bin Min. Max. Typ. S5 1500 1600 4300 S6 1600 1700 4600 S7 1700 1800 4900 S8 1800 1900 5200 S9 1900 2000 5500 T1 2000 2100 5800 T2 2100 2200 6100 Tolerance on each Luminous Intensity bin is +/- 10%. Color Ranks Table Color bin limits at IF = 20mA Ranks CIE 1931Chromaticity coordinates x 0.280 0.288 0.282 0.272 A31 y 0.248 0.262 0.272 0.258 x 0.288 0.296 0.291 0.282 A32 y 0.262 0.276 0.287 0.272 x 0.272 0.282 0.276 0.264 A33 y 0.258 0.272 0.282 0.267 x 0.282 0.291 0.287 0.276 A34 y 0.272 0.287 0.295 0.282

A ll data sheet.com LITE-ON TECHNOLOGY CORPORATION P r o p e r t y o f L i t e - O n O n l y Part No. : LTW-M670GS Page : 5 of 11 BNS-OD-C131/A4 Color Ranks Table Color bin limits at IF = 20mA Ranks CIE 1931Chromaticity coordinates x 0.296 0.291 0.300 0.304 B51 y 0.276 0.287 0.295 0.285 x 0.304 0.300 0.309 0.311 B52 y 0.285 0.295 0.305 0.294 x 0.291 0.287 0.297 0.300 B53 y 0.287 0.295 0.305 0.295 x 0.300 0.297 0.307 0.309 B54 y 0.295 0.305 0.315 0.305 x 0.311 0.307 0.33 0.33 B6 y 0.294 0.315 0.339 0.318 x 0.291 0.279 0.302 0.308 B7 y 0.257 0.276 0.302 0.279 x 0.308 0.302 0.319 0.321 B8 y 0.279 0.302 0.318 0.294 Tolerance on each Hue (x, y) bin is +/- 0.01. C. I. E. 1931 Chromaticity Diagram 0.238 0.248 0.258 0.268 0.278 0.288 0.298 0.308 0.318 0.328 0.338 0.348 0.358 X-coordinate Y-coordinate A31 A32 A33 A34 B B51 B 52B53 B54

A ll data sheet.com LITE-ON TECHNOLOGY CORPORATION P r o p e r t y o f L i t e - O n O n l y Fig.1 RELATIVE INTENSITY VS. WAVELENGTH 0.0 0.5 1.0 350 450 550 650 750 wavelength (nm) Relative Intensity Typical Electrical / Optical Characteristics Curves (25°° °°C Ambient Temperature Unless Otherwise Noted) Part No. : LTW-M670GS Page : 6 of 11 BNS-OD-C131/A

A ll data sheet.com LITE-ON TECHNOLOGY CORPORATION P r o p e r t y o f L i t e - O n O n l y User Guide Cleaning Do not use unspecified chemical liquid to clean LED they could harm the package. If cleaning is necessary, immerse the LED in ethyl alcohol or isopropyl alcohol at normal temperature for less than one minute. Recommend Printed Circuit Board Attachment Pad Infrared / vapor phase Reflow Soldering Package Dimensions of Tape Note: 1. All dimensions are in millimeters (inches). Part No. : LTW-M670GS Page : 7 of 11 BNS-OD-C131/A4

A ll data sheet.com LITE-ON TECHNOLOGY CORPORATION P r o p e r t y o f L i t e - O n O n l y Package Dimensions of Reel Notes: 1. Empty component pockets sealed with top cover tape. 2. 7 inch reel-2000 pieces per reel. 3. Minimum packing quantity is 500 pieces for remainders. 4. The maximum number of consecutive missing lamps is two. 5. In accordance with EIA-481-1-B specifications. Part No. : LTW-M670GS Page : 8 of 11 BNS-OD-C131/A4

A ll data sheet.com LITE-ON TECHNOLOGY CORPORATION P r o p e r t y o f L i t e - O n O n l y Part No. : LTW-M670GS Page : 9 of 11 BNS-OD-C131/A4 CAUTIONS 1. Application The LEDs described here are intended to be used for ordinary electronic equipment (such as office equipment, communication equipment and household applications).Consult Liteon’s Sales in advance for information on applications in which exceptional reliability is required, particularly when the failure or malfunction of the LEDs may directly jeopardize life or health (such as in aviation, transportation, traffic control equipment, medical and life support systems and safety devices). 2. Storage The storage ambient for the LEDs should not exceed 30°C temperature or 70% relative humidity. It is recommended that LEDs out of their original packaging are IR-reflowed within one week. For extended storage out of their original packaging, it is recommended that the LEDs be stored in a sealed container with appropriate desiccant, or in desiccators with nitrogen ambient. LEDs stored out of their original packaging for more than a week should be baked at about 60 deg C for at least 24 hours before solder assembly. 3. Cleaning Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED if necessary. 4. Soldering Recommended soldering conditions: Reflow soldering Wave Soldering Soldering iron Pre-heat Pre-heat time Soldering Temp. Soldering time 120~150°C 120 sec. Max. 260°C Max. 30 sec. Max. Pre-heat Pre-heat time Solder wave Soldering time 100°C Max. 60 sec. Max. 260°C Max. 10 sec. Max. Temperature Soldering time 300°C Max. 3 sec. Max. (one time only) 5. Drive Method An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs connected in parallel in an application, it is recommended that a current limiting resistor be incorporated in the drive circuit, in series with each LED as shown in Circuit A below. Circuit model A Circuit model B LED LED (A) Recommended circuit. (B) The brightness of each LED might appear different due to the differences in the I-V characteristics of those LEDs. 6. ESD (Electrostatic Discharge) Static Electricity or power surge will damage the LED. Suggestions to prevent ESD damage: /square6 Use of a conductive wrist band or anti-electrostatic glove when handling these LEDs. /square6 All devices, equipment, and machinery must be properly grounded. /square6 Work tables, storage racks, etc. should be properly grounded. /square6 Use ion blower to neutralize the static charge which might have built up on surface of the LED’s plastic lens as a result of friction between LEDs during storage and handling.

A ll data sheet.com LITE-ON TECHNOLOGY CORPORATION P r o p e r t y o f L i t e - O n O n l y Part No. : LTW-M670GS Page : 10 of 11 BNS-OD-C131/A4 ESD-damaged LEDs will exhibit abnormal characteristics such as high reverse leakage current, low forward voltage, or “no lightup” at low currents. To verify for ESD damage, check for “light up” and Vf of the suspect LEDs at low currents. The Vf of “good” LEDs should be >2.0V@0.1mA for InGaN product and >1.4V@0.1mA for AlInGaP product. 7. Reliability Test Test Item Test Condition Reference Standard Note Number of Damaged Resistance to Soldering Heat (Reflow Soldering) Tsld=260℃, 10sec. (Pre treatment 30℃,70%,168hrs.) JEITA ED-4701 300 301 2 times 0/50 Solderability (Reflow Soldering) Tsld=245±5℃, 3sec. (Lead Free Solder) JEITA ED-4701 300 303 1 time Over 95% 0/50 Thermal Shock 0℃ ~ 100℃ 15sec. 15sec. . JEITA ED-4701 300 307 20 cycles 0/50 Temperature Cycle -40℃ ~ 25℃ ~ 100℃ ~ 25℃ 30min. 5min. 30min. 5min. JEITA ED-4701 100 105 100 cycles 0/50 Moisture Resistance Cyclic 25℃ ~ 65℃ ~ -10℃ 90%RH 24HRS./1cycle JEITA ED-4701 200 203 10 cycles 0/50 High Temperature Storage Ta=100 ℃ JEITA ED-4701 200 201 1000 hrs. 0/50 Temperature Humidity Storage Ta=60 ℃, RH=90% JEITA ED-4701 100 103 1000 hrs. 0/50 Low Temperature Storage Ta=-40℃ JEITA ED-4701 200 202 1000 hrs. 0/50 Steady State Operating Life Condition 1 Ta=25 ℃, IF=20mA 1000 hrs. 0/50 Steady State Operating Life Condition 2 Ta=25 ℃, IF=30mA 500 hrs. 0/50 Steady State Operating Life of High Temperature Ta=85 ℃, IF=5mA 1000 hrs. 0/50 Steady State Operating Life of High Humidity Heat 60℃, RH=90% , IF=15mA 500 hrs. 0/50 Steady State Operating Life of low Temperature Ta=-30℃, IF=20mA 1000 hrs. 0/50 Vibration 100~2000~100Hz Sweep 4 min. 200m/s2 3 direction , 4 cycles JEITA ED-4701 400 403 48 min. 0/50 Substrate Bending 3 mm , 5±1 sec. JEITA ED-4702 1 time 0/50 Stick 5N , 10±1 sec. JEITA ED-4702 1 time 0/50

A ll data sheet.com LITE-ON TECHNOLOGY CORPORATION P r o p e r t y o f L i t e - O n O n l y 8. Others The appearance and specifications of the product may be modified for improvement without prior notice. 9. Quality Guarantee LiteOn guarantee DPPM level of function failure is smaller and equal to 50 DPPM. (Based on 100k usage) 10. Suggested Checking List Training and Certification 1. Everyone working in a static-safe area is ESD-certified? 2. Training records kept and re-certification dates monitored? Static-Safe Workstation & Work Areas 1. Static-safe workstation or work-areas have ESD signs? 2. All surfaces and objects at all static-safe workstation and within 1 ft measure less than 100V? 3. All ionizer activated, positioned towards the units? 4. Each work surface mats grounding is good? Personnel Grounding 1. Every person (including visitors) handling ESD sensitive (ESDS) items wear wrist strap, heel strap or conductive shoes with conductive flooring? 2. If conductive footwear used, conductive flooring also present where operator stand or walk? 3. Garments, hairs or anything closer than 1 ft to ESD items measure less than 100V*? 4. Every wrist strap or heel strap/conductive shoes checked daily and result recorded for all DLs? 5. All wrist strap or heel strap checkers calibration up to date? Note: *50V for Blue LED. Device Handling 1. Every ESDS items identified by EIA-471 labels on item or packaging? 2. All ESDS items completely inside properly closed static-shielding containers when not at static-safe workstation? 3. No static charge generators (e.g. plastics) inside shielding containers with ESDS items? 4. All flexible conductive and dissipative package materials inspected before reuse or recycle? Others 1. Audit result reported to entity ESD control coordinator? 2. Corrective action from previous audits completed? 3. Are audit records complete and on file? Part No. : LTW-M670GS Page : 11 of 11 BNS-OD-C131/A4