AM23ID-F TO-GRACE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
© 20 19 Kingbright. All Rights Reserved. Spec No: DSAD1245 / 1202000019 Rev No: V.17A Date: 04/12/2019 Page 1 / 4 DESCRIP TION z T he High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode
FEATURES
-23 package surface mount LED lamp z Lo w power consumption z Lo ng life - solid state reliability z Packa ge: 2000 pcs / reel z Moistur e sensitivity level: 3 z Ro HS compliant APPLIC ATIONS z Backlight z Status in dicator z Hom e and smart appliances z W earable and portable devices z He althcare applications PACKAGE DI MENSIONS SELECTION GUIDE Notes: θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. AM23ID-F SOT-23 Surf ace Mount LED Lamp RECOMMENDED SOLDERING PATTERN (units : mm ; tolerance : ± 0.1) Part Number Emitti ng Color (Material) Lens T ype I v (mcd) @ 20mA [ 2] Vie wing Angle [1 Min. Ty p. 2θ1/2 AM23ID-F ■ High Efficiency Red (GaAsP/Ga Red Diffused 5 12 *3 *7 170° Notes: All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 5.The device has a single mounting surface. The device must be mounted according to the specifications. 香港至恩科技有限公司 www.to-grace.com 公司授权代理销售LITE-ON:光耦，贴片LED灯等 进口原装，现货供应，价格优势，技术支持 电话：0755-83464948 传真：0755-83464076 A ll data sheet.com
© 2019 Kingbright. All Rights Reserved. Spec No: DSAD1245 / 1202000019 Rev No: V.17A Date: 04/12/2019 Page 2 / 4 ABSOLUTE MAXIMUM RATINGS at TA=25°C ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C AM23ID-F Parameter Symbol Emitting Color Value Unit Typ. Max. Wavelength at Peak Emission IF = 20mA λpeak High Efficiency Red 627 - nm Dominant Wavelength IF = 20mA λdom [1] High Efficiency Red 617 - nm Spectral Bandwidth at 50% Φ REL MAX IF = 20mA Δλ High Efficiency Red 45 - nm Capacitance C High Efficiency Red 15 - pF Forward Voltage IF = 20mA VF [2] High Efficiency Red 2.0 2.5 V Reverse Current (VR = 5V) IR High Efficiency Red - 10 μA Parameter Symbol Value Unit Power Dissipation PD 75 mW Reverse Voltage VR 5 V Junction Temperature Tj 125 °C Operating Temperature Top -40 to +85 °C Storage Temperature Tstg -40 to +85 °C DC Forward Current IF 30 mA Peak Forward Current IFM [1] 160 mA Electrostatic Discharge Threshold (HBM) - 8000 V Notes: 1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. ) 2. Forward voltage: ±0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. A ll data sheet.com
© 2019 Kingbright. All Rights Reserved. Spec No: DSAD1245 / 1202000019 Rev No: V.17A Date: 04/12/2019 Page 3 / 4 TECHNICAL DATA 20% 40% 60% 80% 100% 350 400 450 500 550 600 650 700 750 800 T a = 25 °C Red Wavelength (nm) Relative Intensity (a. u.) RELATIVE INTENSITY vs. WAVELENGTH HIGH EFFICIENCY RED TAPE SPECIFICATIONS (units : mm) REEL DIMENSION (units : mm) REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS 0.5 0.50.0 -90° -75° -60° -45° -30° -15° 75° 60° 45° 30° 0° 15° 90° 1.0 1.0 Ta = 25 °C SPATIAL DISTRIBUTION AM23ID-F Ta = 25 °C Forward voltage (V) Forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 0 1 02 03 04 05 0 T a = 25 °C Forward current (mA) Luminous intensity normalised at 20mA - 4 0 - 2 0 0 2 04 06 08 0 1 0 0 Ambient temperature (°C) Permissible forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 - 4 0 - 2 00 2 04 06 08 0 1 0 0 Ambient temperature (°C) Luminous intensity normalised at Ta = 25 °C Forward Current vs. Forward Voltage Luminous Intensity vs. Forward Current Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. A ll data sheet.com
© 2019 Kingbright. All Rights Reserved. Spec No: DSAD1245 / 1202000019 Rev No: V.17A Date: 04/12/2019 Page 4 / 4 PACKING & LABEL SPECIFICATIONS AM23ID-F PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference on ly. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at https://www.KingbrightUSA.com/ApplicationNotes A ll data sheet.com