M5RS-06-M/Q

M5RS MSYSTEM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

MODEL: M5RS M5RS SPECIFICATIONS ES-2463 Rev.14 Page 1/3 http://www.m-system.co.jp/ Super-mini Terminal Block Signal Conditioners M5-UNIT RTD TRANSMITTER Functions & Features

• Accepts direct input from an RTD and provides a standard process signal
• Linearization and burnout
• High-density mounting
• Power LED 25 (.98) (3.82) 41 (1.61) mm (inch) MODEL: M5RS-[1][2]-[3][4]

ORDERING INFORMATION

• Code number: M5RS-[1][2]-[3][4] Specify a code from below for each [1] through [4]. (e.g. M5RS-4A-R/K/BL/Q)
• Temperature range (e.g. 0 – 500°C)
• Special output range (For codes Z, 0 & 01)
• Specify the specification for option code /Q (e.g. /C01/V01/S01) [1] INPUT RTD (2- or 3-wire) 1: JPt 100 (JIS'89) (Usable range: -200 to +500°C, -328 to +932°F; min.span: 50°C, 90°F) 3: Pt 100 (JIS'89) (Usable range: -200 to +650°C, -328 to +1202°F; min.span: 50°C, 90°F) 4: Pt 100 (JIS'97, IEC) (Usable range: -200 to +850°C, -328 to +1562°F; min.span: 50°C, 90°F) 5: Pt 50 Ω (JIS'81) (Usable range: -200 to +500°C, -328 to +932°F; min.span: 100°C, 180°F) 6: Ni 508.4 Ω (Usable range: -50 to +200°C, -58 to +392°F; min.span: 30°C, 54°F) 0: Specify Note: Consult M-System for 2-wire RTD [2] OUTPUT Current A: 4 – 20 mA DC (Load resistance 550 Ω max.) D: 0 – 20 mA DC (Load resistance 550 Ω max.) Z: Specify current (See OUTPUT SPECIFICATIONS) Voltage 1: 0 – 10 mV DC (Load resistance 100 kΩ min.) (CE not available) 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) (CE not available) 3: 0 – 1 V DC (Load resistance 100 Ω min.) 4: 0 – 10 V DC (Load resistance 1000 Ω min.) 5: 0 – 5 V DC (Load resistance 500 Ω min.) 6: 1 – 5 V DC (Load resistance 500 Ω min.) 1W: -10 – +10 mV DC (Load resistance 100 kΩ min.) (CE not available) 2W: -100 – +100 mV DC (Load resistance 100 kΩ min.) (CE not available) 3W: -1 – +1 V DC (Load resistance 800 Ω min.) 4W: -10 – +10 V DC (Load resistance 8000 Ω min.) 5W: -5 – +5 V DC (Load resistance 4000 Ω min.) 0: Specify voltage (See OUTPUT SPECIFICATIONS) 01: Specify voltage (See OUTPUT SPECIFICATIONS) (CE not available) [3] POWER INPUT AC Power M: 85 – 264 V AC (Operational voltage range 85 – 264 V, 47 – 66 Hz) (CE not available) DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [4] OPTIONS (multiple selections) Response Time (0 – 90 %) blank: Standard (≤ 0.5 sec.) /K: Fast Response (Approx. 25 msec.) Burnout blank: Upscale burnout /BL: Downscale burnout Other Options blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating ADJUSTMENT /V01: Multi-turn fine adjustment /VN: Sealed adjustment holes TERMINAL SCREW MATERIAL /S01: Stainless steel

MODEL: M5RS M5RS SPECIFICATIONS ES-2463 Rev.14 Page 2/3 http://www.m-system.co.jp/ GENERAL SPECIFICATIONS Construction: Terminal block Connection: M3.5 screw terminals (torque 0.8 N·m) Screw terminal: Nickel-plated steel (standard) or stainless steel Housing material: Flame-resistant resin (black) Isolation: Input to output to power Overrange output: Approx. -10 to +110 % at 1 – 5 V Zero adjustment: -2 to +2 % (front) Span adjustment: 98 to 102 % (front) At burnout: Downscale ≤ -10 %, Upscale ≥ 110 %, For output code 4W, Downscale ≤ -3%, Upscale ≥ 103% Linearization: Standard Power LED: Green LED turns on when the power is supplied. INPUT SPECIFICATIONS Maximum leadwire resistance: 200 Ω per wire (3-wire) Sensing current: 2 mA (Pt); 1 mA (Ni 508.4 Ω) OUTPUT SPECIFICATIONS ■ DC Current: 0 – 20 mA DC Minimum span: 1 mA Offset: Max. 1.5 times span Load resistance: Output drive 11 V max. ■ DC Voltage

• Output code 0 (CE) Voltage range: -10 – +10 V DC Minimum span: 1 V Offset: Max. 1.5 times span Load resistance: Output drive 10 mA max.; at ≥1 V Max. 1.25 mA output drive for negative voltage
• Output code 01 (Not CE) Voltage range: -1 – +1 V DC Minimum span: 10 mV Offset: Max. 1.5 times span Load resistance: Min. 100 kΩ Min. 1 MΩ for negative voltage INSTALLATION Power Consumption
• AC: Approx. 2 VA at 100 V Approx. 3 VA at 200 V Approx. 3 VA at 264 V
• DC: Approx. 2 W Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 0 to 90 %RH (non-condensing) Mounting: DIN rail Weight: 80 g (2.8 oz) PERFORMANCE in percentage of span Accuracy: ±0.2 % Temp. coefficient: (at 200°C or 360°F or greater spans) (at narrower than 200°C or 360°F spans) Burnout response: ≤ 10 sec. Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength (input to output to power to ground) DC powered: 2000 V AC @1 minute AC powered: 1500 V AC @1 minute STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EN 50581

MODEL: M5RS M5RS SPECIFICATIONS ES-2463 Rev.14 Page 3/3 http://www.m-system.co.jp/ FRONT VIEW Span Adj. Power LED Zero Adj. 1 2 3 4 5 6 7 8 EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 94 (3.70) 3 (.12)

• When mounting, no extra space is needed between units. DIN RAIL 35mm wide 8–M3.5 SCREW7.3 (.29)1 2 3 4 5 6 7 8 SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM OUTPUT A B B RTD Isolation Output Driver SZ Voltage Amplifier Burnout Linearizer Constant Current Differential Amplifier Reference Resistor

7 U(+)

V(–) POWER POWER LED Specifications are subject to change without notice.