DIN5151 PERMCO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

Features

  • ISO 7653 4 bolt flange mount Ø80 mm pilot
  • DIN 5462 - 8 x 32 x 36 spline shaft
  • Dual Ported - Standard 1-1/2” NPT rear ports and up to 1-1/2” NPT side ports
  • Pressure balanced wear plates maintain high pump efficiency throughout all operating ranges
  • Bi-Rotational Pump/Motor designed to fit a wide varity of applications
  • Doweled and high strength cast iron construction
  • High strength alloy steel gear and shaft sets
  • NPT & SAE ports are available
  • Cubic inch displacements from 3.86 through 7.07
  • Maximum pressure up to 3000 PSI
  • Speeds to 2400 RPM
  • 100% factory tested Lil Tipper 2 ValveDIN 5151

Permco USA | 1500 Frost Road | P. O. Box 2068 | Streetsboro, Ohio 44241 Bulletin # 5151TV2-0521 Version 1.0

5151 Code

www.permco.com Our Online Support is available 24/7/365 for your needs! Email: support@permco.com Call: (800) 626.2801 Lil Tipper Code TV2 - ORB - A - 1 - ** Tipping Valve NPT - Ports ORB - Ports A Air Shift M Manual Shift Pressure Setting 20 2000 psi 25 2500 psi 30 3000 psi Blank Gemini

1 RP-5514

XX/XX Gemini* *Customer must provide both lower and higher pressure relief settings P Outlet (to cylinder) P1 Inlet (from pump) T Tank Line (Return to Tank) T-TANK CUSTOMER SUPPLIED 1.22 A B P-CYLINDER A C P1-INLET LOWER PORT RAISE PORT 1.22 2.01 2.28 1.18 C B P-CYLINDER T-TANK P1-INLET AIR SHIFT TIPPING VALVE V2, DWG THIS PRINT AND THE DESIGN AND DETAIL SHOWN HEREON ARE THE PROPERTY AND INVENTION OF PERMCO, INC. THIS PRINT IS FURNISHED WITH THE UNDERSTANDING THAT IT IS NOT TO BE TRANSFERRED, TRACED, REPRODUCED, STORED IN A RETRIEVAL SYSTEM OR TRANSMITTED, IN ANY FORM OR BY ANY MEANS, ELECTRONIC, MECHANICAL, PHOTOCOPYING, RECORDING OR OTHERWISE WITHOUT PRIOR WRITTEN PERMISSION OF PERMCO, INC. AND IS RETURNABLE UPON DEMAND. ALL RIGHTS OF DESIGN AND INVENTION ARE RESERVED BY PERMCO, INC. DO NOT SCALE DRAWING DRAWING NO.THIRD ANGLE PROJECTION REVISIONDATEDRAWN BY -09-07-18KBS Displ Theo. GPM SAE Ports Max Max Model # A B C Cu.In 1000 RPM Side Rear RPM* PSI P5151C551NMZE15-5 7.38 2.25 4.50 3.86 17 1 1-1/4 3000 3000 P5151C551NMZK17-5 7.63 2.50 4.63 4.50 19 1-1/4 1-1/4 3000 3000 P5151C551NMZK20-5 7.88 2.75 4.75 5.15 23 1-1/4 1-1/4 3000 3000 P5151C551NMZQ22-5 8.13 3.00 4.88 5.70 25 1-1/2 1-1/4 3000 3000 P5151C551NMZQ25-5 8.38 3.25 5.00 6.43 27 1-1/2 1-1/4 3000 3000 P5151C551NMZQ27-5 8.63 3.50 5.13 7.07 30 1-1/2 1-1/4 2400 3000 * Maximun Inlet Vacuum 5 In. Hg. Displ Theo. GPM NPT Ports Max Max Model # A B C Cu.In 1000 RPM Side Rear RPM PSI M5151C751AAXE15-5 7.38 2.25 4.51 3.86 17 1 1-1/2 3000 3000 M5151C751AAXK17-5 7.63 2.50 4.63 4.50 19 1-1/4 1-1/2 3000 3000 M5151C751AAXK20-5 7.88 2.75 4.75 5.15 23 1-1/4 1-1/2 3000 3000 M5151C751AAXQ22-5 8.13 3.00 4.88 5.70 25 1-1/2 1-1/2 3000 3000 M5151C751AAXQ25-5 8.38 3.25 5.00 6.43 27 1-1/2 1-1/2 3000 3000 M5151C751AAXQ27-5 8.63 3.50 5.12 7.07 30 1-1/2 1-1/2 2400 3000 Motor Displ Theo. GPM NPT Ports Max Max Model # A B C Cu.In 1000 RPM Side Rear RPM* PSI P5151C551AAXE15-5 7.38 2.25 4.50 3.86 17 1 1-1/2 3000 3000 P5151C551AAXK17-5 7.63 2.50 4.63 4.50 19 1-1/4 1-1/2 3000 3000 P5151C551AAXK20-5 7.88 2.75 4.75 5.15 23 1-1/4 1-1/2 3000 3000 P5151C551AAXQ22-5 8.13 3.00 4.88 5.70 25 1-1/2 1-1/2 3000 3000 P5151C551AAXQ25-5 8.38 3.25 5.00 6.43 27 1-1/2 1-1/2 3000 3000 P5151C551AAXQ27-5 8.63 3.50 5.13 7.07 30 1-1/2 1-1/2 2400 3000 Pump Displ Theo. GPM SAE Ports Max Max Model # A B C Cu.In 1000 RPM Side Rear RPM PSI M5151C751NMZE15-5 7.38 2.25 4.50 3.86 17 1 1-1/4 3000 3000 M5151C751NMZK17-5 7.63 2.50 4.63 4.50 19 1-1/4 1-1/4 3000 3000 M5151C751NMZK20-5 7.88 2.75 4.75 5.15 23 1-1/4 1-1/4 3000 3000 M5151C751NMZQ22-5 8.13 3.00 4.88 5.70 25 1-1/2 1-1/4 3000 3000 M5151C751NMZQ25-5 8.38 3.25 5.00 6.43 27 1-1/2 1-1/4 3000 3000 M5151C751NMZQ27-5 8.63 3.50 5.13 7.07 30 1-1/2 1-1/4 2400 3000