M3SXT-1Z1-AD/Q

M3SXT MSYSTEM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

MODEL: M3SXT M3SXT SPECIFICATIONS ES-7702 Rev.6 Page 1/4 http://www.m-system.co.jp/ Super-space-saving Signal Conditioners M3S-UNIT Series THERMOCOUPLE TRANSMITTER (PC programmable) Functions & Features

• Accepts a thermocouple input and provides an isolated, linearized DC signal
• Cold junction compensation, linearization and burnout protection
• PC programmable
• Universal AC/DC power input
• High-density mounting
• Power and status indicator LED 12 (.47) mm (inch) 110.5 (4.35) 106 (4.17) MODEL: M3SXT–[1][2]–[3][4]

ORDERING INFORMATION

• Code number: M3SXT-[1][2]-[3][4] Specify a code from below for each [1] through [4]. (e.g. M3SXT-2Z1-R/Q)
• Temperature range (e.g. 0 – 1000°C)
• Output range (e.g. 4 – 20 mA DC)
• Specify the specification for option code /Q (e.g. /C01) [1] INPUT THERMOCOUPLE 1: (PR) 2: K (CA) 3: E (CRC) 4: J (IC) 5: T (CC) 6: B (RH) 7: R 8: S N: N 0: Specify (Please provide a emf table.) (Configurator software is used to change the input type and precise range.) [2] OUTPUT Current Z1: Range 0 – 20 mA DC Voltage V2: Range -10 – +10 V DC V3: Range -5 – +5 V DC (Configurator software is used to change output over the described range of the selected suffix code. For changing between suffix codes, set the Output Range Selector on the side of unit before software adjustment.) [3] POWER INPUT AC Power M2: 100 – 240 V AC (Operational voltage range 90 – 264 V, 47 – 66 Hz) DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) Universal AD: 100 – 240 V AC / 24 – 240 V DC (universal) (Operational voltage range 90 - 264 V AC, 47 - 66 Hz / 21.6 - 264 V DC, ripple 10 %p-p max.) [4] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating

RELATED PRODUCTS

• PC configurator software (model: M3SCFG) Downloadable at M-System’s web site. A dedicated cable is required to connect the module to the PC. Please refer to the internet software download site or the users manual for the PC configurator for applicable cable types.

MODEL: M3SXT M3SXT SPECIFICATIONS ES-7702 Rev.6 Page 2/4 http://www.m-system.co.jp/ GENERAL SPECIFICATIONS Construction: Small-sized front terminal structure Connection: Euro type connector terminal Applicable wire size: 0.2 to 2.5 mm2, stripped length 8 mm Housing material: Flame-resistant resin (gray) Isolation: Input to output to power Overrange output: -2 – +102 % (Negative current output is not available.) Zero adjustment: -2 to +2 % (PC programming) Span adjustment: 98 to 102 % (PC programming) Burnout: Upscale standard; downscale or no burnout optional by programming Linearization: Standard Cold Junction Compensation: CJC sensor incorporated Power LED: Green light turns on when the power is supplied. Status indicator LED: Orange LED; Blinking patterns indicate different operating status of the transmitter. Programming: Downloaded from PC; input type and range, output type and range, zero and span, burnout type, user’s linearization table (max. 300 points, input emf specified within ±1000 mV), etc. Refer to the instruction manual for details. Configurator connection: 2.5 dia. miniature jack; RS-232-C level INPUT SPECIFICATIONS Input resistance: 1 MΩ minimum Burnout sensing: 0.1 μA Factory setting: 1: PR 0 - 1600℃ 2: K 0 - 1000℃ 3: E 0 - 500℃ 4: J 0 - 500℃ 5: T 0 - 300℃ 6: B 500 - 1600℃ 7: R 500 - 1600℃ 8: S 0 - 1600℃ N: N 0 - 1000℃ OUTPUT SPECIFICATIONS ■ DC Current Output range: 0 – 20 mA DC Conformance range: 0 – 20.4 mA DC Minimum span: 1 mA Offset: Lower range can be any specific value within the output range provided that the minimum span is maintained. Load resistance: Output drive 11 V max. (e.g. 4 – 20 mA: 550 Ω [11 V ÷ 20 mA]) If not specified, the output range is 4 – 20 mA DC. ■ DC Voltage Code V2 (wide spans) Output range: -10 – +10 V DC Conformance range: -10.4 – +10.4 V DC Minimum span: 1 V Code V3 (narrow spans) Output range: -5 – +5 V DC Conformance range: -5.2 – +5.2 V DC Minimum span: 0.5 V Offset: Lower range can be any specific value within the output range provided that the minimum span is maintained. Load resistance: Output drive 1 mA max. If not specified, the output range is shown below. V2: 0 – 10 V DC V3: 1 – 5 V DC INSTALLATION Power consumption

• AC: Approx. 2 VA at 100 V Approx. 3 VA at 200 V Approx. 4 VA at 264 V
• DC: R: Approx. 0.5 W AD: Approx. 1 W Operating temperature: -10 to +55°C (14 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: DIN rail Weight: 85 g (3.0 oz) PERFORMANCE Overall accuracy: Input accuracy + output accuracy Input accuracy: Accuracy + Cold Junction Compensation Error 1°C (1.8°F) Output accuracy: Max. Output Range / Span × ±0.04 % Cold junction compensation error: ±1°C max. at 25 ±10°C ±1.8°F max. at 77 ±18°F Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) of max. span Response time: ≤ 0.5 sec. (0 – 90 %) Burnout response: ≤ 10 sec. Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to power to ground)

MODEL: M3SXT M3SXT SPECIFICATIONS ES-7702 Rev.6 Page 3/4 http://www.m-system.co.jp/ CALCULATION EXAMPLES OF OVERALL ACCURACY Input: K thermocouple, 0 – 1000°C, Output: 4 – 20 mA DC Absolute value accuracy (Table 1): 0.25°C CJC error (1°C) added: 1.25°C ➠ Input accuracy = 1.25°C ÷ 1000°C × 100 = 0.125 % Output span: 16 mA (20 – 4) ➠ Output accuracy = 20 mA ÷ 16 mA × 0.04 = 0.05 % ➠ Overall accuracy including CJC error = 0.125 + 0.05 = ±0.18 % of span STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 Low Voltage Directive EN 61010-1 Installation Category II Pollution Degree 2 Input or output to power: Reinforced insulation (300 V) Input to output: Basic insulation (300 V) RoHS Directive EN 50581 EXTERNAL VIEW 1 2 3 4 Power LED Status Indicator LED Configurator Jack 1 2 3 4 5 6 7 8 OFFON SW1 Output Range Selectors INPUT TYPE, RANGE & ACCURACY °C °F THERMOCOUPLE MIN. MAXIMUM CONFORMANCE ACCURACY MIN. MAXIMUM CONFORMANCE ACCURACY SPAN RANGE RANGE SPAN RANGE RANGE (PR) 20 0 to 1760 0 to 1760 ±1.00 36 32 to 3200 32 to 3200 ±1.80 K (CA) 20 -270 to +1370 -150 to +1370 ±0.25 36 -454 to +2498 -238 to +2498 ±0.45 E (CRC) 20 -270 to +1000 -170 to +1000 ±0.20 36 -454 to +1832 -274 to +1832 ±0.36 J (IC) 20 -210 to +1200 -180 to +1200 ±0.25 36 -346 to +2192 -292 to +2192 ±0.45 T (CC) 20 -270 to +400 -170 to +400 ±0.25 36 -454 to +752 -274 to +752 ±0.45 B (RH) 20 100 to 1820 400 to 1760 ±0.75 36 212 to 3308 752 to 3200 ±1.35 R 20 -50 to +1760 200 to 1760 ±0.50 36 -58 to +3200 392 to 3200 ±0.90 S 20 -50 to +1760 0 to 1760 ±0.50 36 -58 to +3200 32 to 3200 ±0.90 N 20 -270 to +1300 -130 to +1300 ±0.30 36 -454 to +2372 -202 to +2372 ±0.54 Table 1 .

MODEL: M3SXT M3SXT SPECIFICATIONS ES-7702 Rev.6 Page 4/4 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 7 8 5 6 1 2 3 4 106 (4.17) (.47) 110.5 (4.35) 62 (2.44) [5 (.20)]

• When mounting, no extra space is needed between units. DIN RAIL 35mm wide SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Isolation Digital Computation Output Driver + OUTPUT POWER LED Low Drift Amplifier STATUS LED CONFIGURATOR JACK DIP SW T/C comp. leadwire CJC SENSOR U(+) V(–) POWER Specifications are subject to change without notice.