M3SXM MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

MODEL: M3SXM M3SXM SPECIFICATIONS ES-7704 Rev.6 Page 1/3 http://www.m-system.co.jp/ Super-space-saving Signal Conditioners M3S-UNIT Series POTENTIOMETER TRANSMITTER (PC programmable) Functions & Features

  • Provides a DC output proportional to a potentiometer or slidewire position input
  • Linearization and burnout protection
  • PC programmable
  • Universal AC/DC power input
  • High-density mounting
  • Power and status indicator LED 12 (.47) mm (inch) 110.5 (4.35) 106 (4.17) MODEL: M3SXM–1[1]–[2][3]

ORDERING INFORMATION

  • Code number: M3SXM-1[1]-[2][3] Specify a code from below for each [1] through [3]. (e.g. M3SXM-1Z1-R/Q)
  • Output range (e.g. 4 – 20 mA DC)
  • Specify the specification for option code /Q (e.g. /C01) INPUT 1: Total resistance 100 – 5000 Ω (Configurator software is used to change the input range.) [1] OUTPUT Current Z1: Range 0 – 20 mA DC Voltage V2: Range -10 – +10 V DC V3: Range -5 – +5 V DC (Configurator software is used to change output over the described range of the selected suffix code. For changing between suffix codes, set the Output Range Selector on the side of unit before software adjustment.) [2] POWER INPUT AC Power M2: 100 – 240 V AC (Operational voltage range 90 – 264 V, 47 – 66 Hz) DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) Universal AD: 100 – 240 V AC / 24 – 240 V DC (universal) (Operational voltage range 90 - 264 V AC, 47 - 66 Hz / 21.6 - 264 V DC, ripple 10 %p-p max.) [3] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating

RELATED PRODUCTS

  • PC configurator software (model: M3SCFG) Downloadable at M-System’s web site. A dedicated cable is required to connect the module to the PC. Please refer to the internet software download site or the users manual for the PC configurator for applicable cable types. GENERAL SPECIFICATIONS Construction: Small-sized front terminal structure Connection: Euro type connector terminal Applicable wire size: 0.2 to 2.5 mm2, stripped length 8 mm Housing material: Flame-resistant resin (gray) Isolation: Input to output to power Overrange output: -2 – +102 % (Negative current output is not available.) Zero adjustment: -2 to +2 % (PC programming) Span adjustment: 98 to 102 % (PC programming) Burnout: Upscale standard; downscale or no burnout optional by programming Power LED: Green light turns on when the power is supplied. Status indicator LED: Orange LED; Blinking patterns indicate different operating status of the transmitter. Programming: Downloaded from PC; input type and range, output type and range, zero and span, burnout type, user’s linearization table (max. 101 points, specified within -2 to

MODEL: M3SXM M3SXM SPECIFICATIONS ES-7704 Rev.6 Page 2/3 http://www.m-system.co.jp/ +102 % for both input and output), etc. Refer to the instruction manual for details. Configurator connection: 2.5 dia. miniature jack; RS-232-C level INPUT SPECIFICATIONS Sensing current: ≤ 0.15 mA Minimum span of each range 0 – 100 Ω : 10 Ω 0 – 300 Ω : 30 Ω 0 – 600 Ω : 60 Ω 0 – 1200 Ω : 120 Ω 0 – 2500 Ω : 250 Ω 0 – 5000 Ω : 500 Ω If not specified, the input range is 0 – 1200 Ω. OUTPUT SPECIFICATIONS ■ DC Current Output range: 0 – 20 mA DC Conformance range: 0 – 20.4 mA DC Minimum span: 1 mA Offset: Lower range can be any specific value within the output range provided that the minimum span is maintained. Load resistance: Output drive 11 V max. (e.g. 4 – 20 mA: 550 Ω [11 V ÷ 20 mA]) If not specified, the output range is 4 – 20 mA DC. ■ DC Voltage Code V2 (wide spans) Output range: -10 – +10 V DC Conformance range: -10.4 – +10.4 V DC Minimum span: 1 V Code V3 (narrow spans) Output range: -5 – +5 V DC Conformance range: -5.2 – +5.2 V DC Minimum span: 0.5 V Offset: Lower range can be any specific value within the output range provided that the minimum span is maintained. Load resistance: Output drive 1 mA max. If not specified, the output range is shown below. V2: 0 – 10 V DC V3: 1 – 5 V DC INSTALLATION Power consumption

  • AC: Approx. 2 VA at 100 V Approx. 3 VA at 200 V Approx. 4 VA at 264 V
  • DC: R: Approx. 0.5 W AD: Approx. 1 W Operating temperature: -10 to +55°C (14 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: DIN rail Weight: 85 g (3.0 oz) PERFORMANCE in percentage of span Accuracy: Input accuracy + output accuracy (Inversely proportional to the span.) Input accuracy: (% of range) 0 – 300 Ω : ±0.05 0 – 600 Ω : ±0.03 0 – 1200 Ω : ±0.03 0 – 2500 Ω : ±0.01 0 – 5000 Ω : ±0.01 Output accuracy: ±0.04 % of max. output range Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) of max. span Response time: ≤ 1 sec. (0 – 90 %) Burnout response: ≤ 10 sec. Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to power to ground) CALCULATION EXAMPLES OF OVERALL ACCURACY [Example] Total Resistance 0 – 1200 Ω, Input Range 250 – 750 Ω, Output Type -5 – +5 V, Output Range 1 – 5 V Max. Input Range (1200 Ω) ÷ Span (500 Ω) × 0.03 % + Max. Output Range (10 V) ÷ Span (4V) × 0.04 % = 0.17 % STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 Low Voltage Directive EN 61010-1 Installation Category II Pollution Degree 2 Input or output to power: Reinforced insulation (300 V) Input to output: Basic insulation (300 V) RoHS Directive EN 50581

MODEL: M3SXM M3SXM SPECIFICATIONS ES-7704 Rev.6 Page 3/3 http://www.m-system.co.jp/ EXTERNAL VIEW 1 2 3 4 Power LED Status Indicator LED Configurator Jack 1 2 3 4 5 6 7 8 OFFON SW1 Output Range Selectors EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 7 8 5 6 1 2 3 4 106 (4.17) (.47) 110.5 (4.35) 62 (2.44) [5 (.20)]

  • When mounting, no extra space is needed between units. DIN RAIL 35mm wide SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Isolation Digital Computation Output Driver + OUTPUT POWER LED Low Drift Amplifier STATUS LED CONFIGURATOR JACK DIP SW POTENTIOMETER max. min. U(+) V(–) POWER Specifications are subject to change without notice.