M3SWVS MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

MODEL: M3SWVS M3SWVS SPECIFICATIONS ES-7709 Rev.5 Page 1/4 http://www.m-system.co.jp/ Super-space-saving Signal Conditioners M3S-UNIT Series SIGNAL TRANSMITTER (two isolated outputs) Functions & Features

  • Galvanically isolates process instrumentation signals
  • Universal AC/DC power input
  • High-density mounting
  • Power indicator LED 12 (.47) mm (inch) 110.5 (4.35) 106 (4.17) MODEL: M3SWVS–[1][2][3]–[4][5]

ORDERING INFORMATION

  • Code number: M3SWVS-[1][2][3]-[4][5] Specify a code from below for each [1] through [5]. (e.g. M3SWVS-AAA-R/K/Q)
  • Special input range (For codes Z & 0)
  • Specify the specification for option code /Q (e.g. /C01) [1] INPUT Current A: 4 – 20 mA DC (Input resistance 50 Ω) B: 2 – 10 mA DC (Input resistance 100 Ω) C: 1 – 5 mA DC (Input resistance 200 Ω) D: 0 – 20 mA DC (Input resistance 50 Ω) E: 0 – 16 mA DC (Input resistance 50 Ω) F: 0 – 10 mA DC (Input resistance 100 Ω) G: 0 – 1 mA DC (Input resistance 1000 Ω) H: 10 – 50 mA DC (Input resistance 20 Ω) Z: Specify current (See INPUT SPECIFICATIONS) Voltage 3: 0 – 1 V DC (Input resistance 1 MΩ min.) 4: 0 – 10 V DC (Input resistance 1 MΩ min.) 5: 0 – 5 V DC (Input resistance 1 MΩ min.) 6: 1 – 5 V DC (Input resistance 1 MΩ min.) 4W: -10 – +10 V DC (Input resistance 1 MΩ min.) 5W: -5 – +5 V DC (Input resistance 1 MΩ min.) 0: Specify voltage (See INPUT SPECIFICATIONS) [2] OUTPUT 1 Current A: 4 – 20 mA DC (Load resistance 280 Ω max.) D: 0 – 20 mA DC (Load resistance 280 Ω max.) Voltage 5: 0 – 5 V DC (Load resistance 5000 Ω min.) 6: 1 – 5 V DC (Load resistance 5000 Ω min.) [3] OUTPUT 2 Same range availability as Output 1 Y: None [4] POWER INPUT AC Power M2: 100 – 240 V AC (Operational voltage range 90 – 264 V, 47 – 66 Hz) DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) Universal AD: 100 – 240 V AC / 24 – 240 V DC (universal) (Operational voltage range 90 - 264 V AC, 47 - 66 Hz / 21.6 - 264 V DC, ripple 10 %p-p max.) [5] OPTIONS (multiple selections) Response Time (0 – 90 %) blank: Standard (≤ 0.5 sec.) /K: Fast Response (Approx. 3.5 msec.) Other Options blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating GENERAL SPECIFICATIONS Construction: Small-sized front terminal structure Connection: Euro type connector terminal Applicable wire size: 0.2 to 2.5 mm2, stripped length 8 mm Housing material: Flame-resistant resin (gray) Isolation: Input to output 1 to output 2 to power Zero adjustment: -2 to +2 % (front) Span adjustment: 98 to 102 % (front) Power LED: Green light turns on when the power is supplied.

MODEL: M3SWVS M3SWVS SPECIFICATIONS ES-7709 Rev.5 Page 2/4 http://www.m-system.co.jp/ INPUT SPECIFICATIONS ■ DC Current: Input resistor incorporated Specify input resistance value among followings for code Z. 20Ω, 50Ω, 100Ω, 200Ω, 249Ω, 1000Ω (0.125 W ≥ [Input current]2 × R) ■ DC Voltage: -30 – +30 V DC Minimum span: 100 mV Offset: Max. 1.5 times span Input resistance: 1 MΩ min. (10 kΩ min. with no power supplied) INSTALLATION Power consumption

  • AC: Approx. 2 VA at 100 V Approx. 3 VA at 200 V Approx. 4 VA at 264 V
  • DC: R: Approx. 0.6 W AD: Approx. 1 W Operating temperature: -20 to +55°C (-4 to +131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: DIN rail Weight: 100 g (3.53 oz) PERFORMANCE in percentage of span Accuracy: ±0.1 % Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output 1 to output 2 to power to ground) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 Low Voltage Directive EN 61010-1 Installation Category II Pollution Degree 2 Input or output to power: Reinforced insulation (300 V) Input to output: Basic insulation (300 V) RoHS Directive EN 50581

MODEL: M3SWVS M3SWVS SPECIFICATIONS ES-7709 Rev.5 Page 3/4 http://www.m-system.co.jp/ EXTERNAL VIEW 1 2 3 4 Power LED Zero Adj. Span Adj. Output 1 Zero Adj. Span Adj. Output 2 EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 7 8 5 6 1 2 3 4 106 (4.17) (.47) 110.5 (4.35) 62 (2.44) [5 (.20)]

  • When mounting, no extra space is needed between units. DIN RAIL 35mm wide SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM SZ Low Drift Amplifier+ INPUT *Input shunt resistor incorporated for current input. Remark: The section enclosed by broken line is only with 2nd output option. POWER LED Isolation Output Driver SZ Output Driver OUTPUT 1 OUTPUT 2 U(+) V(–) POWER

MODEL: M3SWVS M3SWVS SPECIFICATIONS ES-7709 Rev.5 Page 4/4 http://www.m-system.co.jp/ Specifications are subject to change without notice.