M3SYV MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

MODEL: M3SYV M3SYV SPECIFICATIONS ES-7711 Rev.5 Page 1/2 http://www.m-system.co.jp/ Super-space-saving Signal Conditioners M3S-UNIT Series ISOLATOR Functions & Features

  • Galvanically isolates the process instrumentation signals
  • High-density mounting 12 (.47) mm (inch) 110.5 (4.35) 106 (4.17) MODEL: M3SYV–[1][2]–R[3]

ORDERING INFORMATION

  • Code number: M3SYV-[1][2]-R[3] Specify a code from below for each [1] through [3]. (e.g. M3SYV-6A-R/Q)
  • Specify the specification for option code /Q (e.g. /C01) [1] INPUT Current A: 4 – 20 mA DC (Input resistance 250 Ω) D: 0 – 20 mA DC (Input resistance 250 Ω) DW: -20 – +20 mA DC (Input resistance 250 Ω) Voltage 4: 0 – 10 V DC (Input resistance 1 MΩ min.) 5: 0 – 5 V DC (Input resistance 1 MΩ min.) 6: 1 – 5 V DC (Input resistance 1 MΩ min.) 4W: -10 – +10 V DC (Input resistance 1 MΩ min.) 5W: -5 – +5 V DC (Input resistance 1 MΩ min.) [2] OUTPUT Current A: 4 – 20 mA DC (Load resistance 550 Ω max.) D: 0 – 20 mA DC (Load resistance 550 Ω max.) Voltage 4: 0 – 10 V DC (Load resistance 10 kΩ min.) 6: 1 – 5 V DC (Load resistance 5000 Ω min.) 4W: -10 – +10 V DC (Load resistance 10 kΩ min.) POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [3] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating GENERAL SPECIFICATIONS Construction: Small-sized front terminal structure Connection: Euro type connector terminal Applicable wire size: 0.2 to 2.5 mm2, stripped length 8 mm Housing material: Flame-resistant resin (gray) Isolation: Input to output to power Overrange output: Approx. -10 to +120 % at 1 – 5 V Zero adjustment: -2 to +2 % (front) Span adjustment: 98 to 102 % (front) INPUT SPECIFICATIONS ■ DC Current: Input resistor incorporated INSTALLATION Power consumption
  • DC: 1 W Operating temperature: -10 to +55°C (14 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: DIN rail Weight: 100 g (3.53 oz) PERFORMANCE in percentage of span Accuracy: ±0.1 % Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Response time: ≤ 0.5 sec. (0 – 90 %) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to power to ground)

MODEL: M3SYV M3SYV SPECIFICATIONS ES-7711 Rev.5 Page 2/2 http://www.m-system.co.jp/ STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EN 50581 EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 7 8 5 6 1 2 3 4 106 (4.17) (.47) 110.5 (4.35) 62 (2.44) [5 (.20)]

  • When mounting, no extra space is needed between units. DIN RAIL 35mm wide SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Isolation SZ

3 Low Drift

*Shunt resistor incoporated for current input. INPUT * Specifications are subject to change without notice.