M3SMS-2-AD/K

M3SMS MSYSTEM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

MODEL: M3SMS M3SMS SPECIFICATIONS ES-7715 Rev.6 Page 1/3 http://www.m-system.co.jp/ Super-space-saving Signal Conditioners M3S-UNIT Series POTENTIOMETER TRANSMITTER Functions & Features

• Provides a standard DC output proportional to a potentiometer or slidewire position input
• Constant voltage excitation
• Universal AC/DC power input
• Fast response type available
• High-density mounting
• Power indicator LED Typical Applications
• Tank levels
• Positions 12 (.47) mm (inch) 110.5 (4.35) 106 (4.17) MODEL: M3SMS–[1]–[2][3]

ORDERING INFORMATION

• Code number: M3SMS-[1]-[2][3] Specify a code from below for each [1] through [3]. (e.g. M3SMS-A-R/K/Q)
• Special output range (For codes Z & 0)
• Specify the specification for option code /Q (e.g. /C01) INPUT Total resistance 100 Ω – 10 kΩ [1] OUTPUT Current A: 4 – 20 mA DC (Load resistance 550 Ω max.) B: 2 – 10 mA DC (Load resistance 1100 Ω max.) C: 1 – 5 mA DC (Load resistance 2200 Ω max.) D: 0 – 20 mA DC (Load resistance 550 Ω max.) E: 0 – 16 mA DC (Load resistance 680 Ω max.) F: 0 – 10 mA DC (Load resistance 1100 Ω max.) G: 0 – 1 mA DC (Load resistance 11 kΩ max.) Z: Specify current (See OUTPUT SPECIFICATIONS) Voltage 1: 0 – 10 mV DC (Load resistance 10 kΩ min.) 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) 3: 0 – 1 V DC (Load resistance 1000 Ω min.) 4: 0 – 10 V DC (Load resistance 10 kΩ min.) 5: 0 – 5 V DC (Load resistance 5000 Ω min.) 6: 1 – 5 V DC (Load resistance 5000 Ω min.) 4W: -10 – +10 V DC (Load resistance 10 kΩ min.) 5W: -5 – +5 V DC (Load resistance 5000 Ω min.) 0: Specify voltage (See OUTPUT SPECIFICATIONS) [2] POWER INPUT AC Power M2: 100 – 240 V AC (Operational voltage range 90 – 264 V, 47 – 66 Hz) DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) Universal AD: 100 – 240 V AC / 24 – 240 V DC (universal) (Operational voltage range 90 - 264 V AC, 47 - 66 Hz / 21.6 - 264 V DC, ripple 10 %p-p max.) [3] OPTIONS (multiple selections) Response Time (0 – 90 %) blank: Standard (≤ 0.5 sec.) /K: Fast Response (Approx. 25 msec.) Other Options blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating GENERAL SPECIFICATIONS Construction: Small-sized front terminal structure Connection: Euro type connector terminal Applicable wire size: 0.2 to 2.5 mm2, stripped length 8 mm Housing material: Flame-resistant resin (gray) Isolation: Input to output to power Overrange output: Approx. -10 to +120 % at 1 – 5 V Zero adjustment: 0 – 30 % of total resistance (front) Span adjustment: 70 – 100 % of total resistance (front) Power LED: Green light turns on when the power is supplied.

MODEL: M3SMS M3SMS SPECIFICATIONS ES-7715 Rev.6 Page 2/3 http://www.m-system.co.jp/ INPUT SPECIFICATIONS Minimum span: 70 % of total resistance Excitation: 0.5 V DC OUTPUT SPECIFICATIONS ■ DC Current: 0 – 20 mA DC Minimum span: 1 mA Offset: Max. 1.5 times span Load resistance: Output drive 11 V max. ■ DC Voltage: -10 – +11 V DC Minimum span: 5 mV Offset: Max. 1.5 times span Load resistance: Output drive 1 mA maximum; at ≥ 0.5 V INSTALLATION Power consumption

• AC: Approx. 2 VA at 100 V Approx. 3 VA at 200 V Approx. 4 VA at 264 V
• DC: Approx. 1 W Operating temperature: -10 to +55°C (14 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: DIN rail Weight: 100 g (3.53 oz) PERFORMANCE in percentage of span Accuracy: ±0.1 % Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to power to ground) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 Low Voltage Directive EN 61010-1 Installation Category II Pollution Degree 2 Input or output to power: Reinforced insulation (300 V) Input to output: Basic insulation (300 V) RoHS Directive EN 50581

MODEL: M3SMS M3SMS SPECIFICATIONS ES-7715 Rev.6 Page 3/3 http://www.m-system.co.jp/ EXTERNAL VIEW 1 2 3 4 Zero Adj. Power LED Span Adj. EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 7 8 5 6 1 2 3 4 106 (4.17) (.47) 110.5 (4.35) 62 (2.44) [5 (.20)]

• When mounting, no extra space is needed between units. DIN RAIL 35mm wide SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Isolation SZ Output Driver OUTPUT U(+) V(–) POWER Low Drift Amplifier POTENTIOMETER max. min. 3 Excitation Volt. Generator POWER LED Specifications are subject to change without notice.