M2VV MSYSTEM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
MODEL: M2VV M2VV SPECIFICATIONS ES-5017 Rev.6 Page 1/2 http://www.m-system.co.jp/ Super-mini Signal Conditioners Mini-M Series VOLTAGE DIVIDER Functions & Features
- Steps down a voltage too high to be input to a general transmitter
- Divided to 1/1000 or by a specified ratio Model 23 (.91) (2.99) 124 (4.88) mm (inch) MODEL: M2VV-[1][2]
ORDERING INFORMATION
- Code number: M2VV-[1][2] Specify a code from below for each of [1] and [2]. (e.g. M2VV-1/Q)
- Special ratio (e.g. 1/300)
- Specify the specification for option code /Q (e.g. /C01/S01) [1] DIVIDING RATIO 1: 1/1000 0: Specify [2] OPTIONS Other Options blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating TERMINAL SCREW MATERIAL /S01: Stainless steel GENERAL SPECIFICATIONS Construction: Plug-in Connection: M3 screw terminals (torque 0.8 N·m) Screw terminal: Chromated steel (standard) or stainless steel Housing material: Flame-resistant resin (black) INPUT & OUTPUT Dividing ratio: 1/300 – 1/1000 Input voltage: Any specific DC voltage value up to ±1200 V Input resistance: Approx. 1.1 MΩ Output voltage: Input Voltage × Dividing Ratio Output resistance: Approx. 1.1 kΩ with 1/1000 ratio; Output Resistance [kΩ] ≈ Dividing Ratio × 1100 INSTALLATION Operating temperature: -5 to +60°C (23 to 140°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Surface or DIN rail (Multiple installation bases can not be used.) Weight: 150 g (0.33 lb) PERFORMANCE in percentage of dividing ratio Accuracy: ±0.2 % Temp. coefficient: ±0.005 %/°C (±0.003 %/°F) Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input or output to ground)
MODEL: M2VV M2VV SPECIFICATIONS ES-5017 Rev.6 Page 2/2 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 21.5 (.85) 70.5 (2.78) 6 (.23) 59 (2.32) DIN RAIL 35mm wide [4 (.16)] 8–M3 SCREW 72 (2.83) 23 (.91) 2–4.2x5 (.17x.20) MTG HOLE 6 (.24) deep 114 (4.49)
- When mounting, no extra space is needed between units. 14 13 4 (.16) SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Base Socket INPUT OUTPUT Voltage Divider Specifications are subject to change without notice.