MX23A JAE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

Compact Type Low-profiled Waterproof Connector

  • No. of contacts: 12 ,18, 26, 34 pos. (Pin side 2types: Reverse and Standard **excluding 12 pos.) Contact resistance: 10m ohm max.
  • Dielectric withstanding voltage: AC 1000 Vr.m.s (1 minute)
  • Operating temperature: -40 to+125 Deg. C (Including temperature rise caused by power distribution)
  • Current rating: 3A
  • Insulation resistance: 100M ohm min.
  • Life time: 50 times
  • Applicable wire : Position of using wire is specified. „Low profiled type with board mo unting height of 18.3mm and socket connector height of 22.2mm max. „Double fin structure with high reliability is adopted for socket cont act and large chamfer is prepared in the front-edge side to prevent grommet from damaging. „Incomplete insertion of socket contact into its housing can be detected with the front cap mounting process. „Full water poof grommet is used for socket contact crimping area in order to reduce size. „Water protection seal ring is used in connector ’s mating area. It realiz es full protection from hands touching on insulator wall. „Reverse type pin connector (with pins facing up) is also available. MX23A connector can be used for wide range water proof equipment including automobiles, motorcycles and so on. This connector has high environmental capability with waterproof structure by sealing in its mating area and by grommet in its wire crimping area for full protection against water. Reverse type pin connector (with pins facing up) is also available in consideration of mounting space. Socket Connector Pin Connector (Standard Type) Pin Connector (Reverse Type) 1.6dia. to 2.2dia. mmSheath diameter #22 to #16A.W.G No. 0.3 to 1.25mm2Conductive area AVSS, AVS(partially)Cable type RoHS Compliant

JAE PMK Div. Proprietary. Copyright © 2006，Japan Aviation Electronics Industry, Ltd. Materials and Finishes Configuration ■Socket Connector Glass filled PBTDummy pin Silicon rubberSeal ring Silicon rubberGrommet Glass filled PBTRear cover Glass filled PBTFront cap Glass filled PBTSocket housing Materials/FinishesComponents ■Pin Connector Materials/FinishesComponents Copper alloy/ Sn plating Pin contact Glass filled PBTPin insulator ■Socket Contact Materials/FinishesComponents Copper alloy/Sn platingSocket Contact Crimp tool ET-MX23350-MX23-2CT160-3B-MX23 Contact release jigSemi automatic applicatorHand crimping tool Rear cover Grommet Socket housing Seal ring Front cap Pin insulator Pin contact

JAE PMK Div. Proprietary. Copyright © 2006，Japan Aviation Electronics Industry, Ltd. Outside Dimension 1. Pin connector (Standard) ＡＢＣＤＥ 18 pos. 38 24 34 20 31 26 pos. 48 34 44 30 41 34 pos. 58 44 54 40 51Pitch Recommended foot-pattern for PWB ( reference)

JAE PMK Div. Proprietary. Copyright © 2006，Japan Aviation Electronics Industry, Ltd. 2. Pin connector (Reverse) ＡＢＣＤＥ 18 pos. 38 24 34 20 31 26 pos. 48 34 44 30 41 34 pos. 58 44 54 40 51 Pitch Recommended foot-pattern for PWB ( reference)

JAE PMK Div. Proprietary. Copyright © 2006，Japan Aviation Electronics Industry, Ltd. 3. Socket housing 4. Front cap DF 12 pos. 12.5 29.1 18 pos. 20 36.6 26 pos. 30 46.6 34 pos. 40 56.6 Pitch Ｆ ＤＧ 12 pos. 12.5. 21.7 18 pos. 20 28.9 26 pos. 30 38.9 34 pos. 40 48.9 Pitch

JAE PMK Div. Proprietary. Copyright © 2006，Japan Aviation Electronics Industry, Ltd. 5. Dummy pin (M120-55780) 6. Socket contact (M23S05K351)

JAE PMK Div. Proprietary. Copyright © 2006，Japan Aviation Electronics Industry, Ltd. Japan Aviation Electronics Industry, Limited Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2787 FAX: +81-3-3780-2946 * The specifications in this brochure are subject to change without notice. Please contact JAE for information. Notice: Products shown in this leaflet are made for the applications listed below. However, if the above-mentioned products are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for life-support systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications: Computers, Office machines, Measuring devices, Telecommunication devices (Terminals, Mobile devices), AV devices, Household applications, FA devices, etc. Drawing Number Product Specification―――JACS-1728 Instruction Manual―― ― ―JAHL- 1728 Part Number Drawing No. Note MX23A12SF1 SJ100915 12pos. Socket Housing MX23A12XF1 SJ100916 12pos. Front Cap MX23A12NF1 SJ100917 12pos. Standard Pinheader MX23A18SF1 SJ037397 18pos. Socket Housing MX23A18XF1 SJ037398 18pos. Front Cap MX23A18NF1 SJ037399 18pos. Standard Pinheader MX23A18NF2 SJ037400 18pos. Reverse Pinheader MX23A26SF1 SJ037393 26pos. Socket Housing MX23A26XF1 SJ037394 26pos. Front Cap MX23A26NF1 SJ037395 26pos. Standard Pinheader MX23A26NF2 SJ037396 26pos. Reverse Pinheader MX23A34SF1 SJ037389 34pos. Socket Housing MX23A34XF1 SJ037390 34pos. Front Cap MX23A34NF1 SJ037391 34pos. Standard Pinheader MX23A34NF2 SJ037392 34pos. Reverse Pinheader M23S05K351 SJ036377 Socket Contact M120-55780 SJ036379 Dummy Pin