LTW-089E2CG-A

LTW-089E2CG-A TO-GRACE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 13

Technical content

A ll data sheet.com L ITE-ON TECHNOLOGY CORPORATION P r o p e r t y o f L i t e - O n O n l y F eatures Package in 8mm tape on 7" diameter reels. * Compatible with automatic placement equipment. * Compatible with infrared and vapor phase reflow solder process. * EIA STD package. * I.C. compatible. * Meet green product and Pb-free(According to RoHS) P ackage Dimensions Part No. Lens Color Source Color LTW-089E2CG-A Yellow InGaN White N otes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1 mm (.004") unless otherwise noted. D efinition of Distance Between of PAD and Reflector S ymbol D imension (mm) A : The distance between pad’s bottom and reflector. A 0 min 0 .05 max B : The tolerance between right and left pad. B 0 min 0 .03 max C : The distance between pad and reflector. C 0 min 0 .05 max P art No. : LTW-089E2CG-A Page : 1 of 13 B NS-OD-C131/A4 香港至恩科技有限公司 www.to-grace.com 公司授权代理销售LITE-ON:光耦，贴片LED灯等 进口原装，现货供应，价格优势，技术支持 电话：0755-83464948 传真：0755-83464076

A ll data sheet.com LITE-ON TECHNOLOGY CORPORATION P r o p e r t y o f L i t e - O n O n l y Absolute Maximum Ratings at Ta=25 ℃℃℃℃ Parameter LTW-089E2CG-A Unit Power Dissipation (30mA, 4V) 120 mW Power Dissipation (20mA, 3.5V) 70 mW Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) 100 mA DC Forward Current 30 mA Reverse Voltage 5 V Operating Temperature Range -30℃ to + 85℃ Storage Temperature Range -40℃ to + 100℃ Reflow Soldering Condition 260℃ For 10 Seconds Suggest IR Reflow Condition : R-Reflow Soldering Profile for lead free soldering (Acc. to J-STD-020B) Part No. : LTW-089E2CG-A Page : 2 of 13 BNS-OD-C131/A4

A ll data sheet.com LITE-ON TECHNOLOGY CORPORATION P r o p e r t y o f L i t e - O n O n l y Electrical Optical Characteristics At Ta=25℃℃℃℃ Parameter Symbol Part No. LTW- Min. Typ. Max. Unit Test Condition Luminous Flux lm 089E2CG-A 4.0 6.6 lm IF = 20mA Note 1, 2 Luminous Intensity Iv 089E2CG-A 2000 IF = 20mA Note 1, 2 Viewing Angle 2θ1/2 089E2CG-A 120 deg Fig.6 x 0.300 Chromaticity Coordinates y 089E2CG-A 0.285 IF = 20mA Note 3, 5, 6 Forward Voltage VF 089E2CG-A 3.0 3.2 3.4 V IF = 20mA ESD-Withstand Voltage ESD 089E2CG-A 1K V HBM Note : 1. Luminous Flux is measured with a light sensor and filter combination that approximates the CIE eye-response curve. 2. Flux classification code is marked on each packing bag. 3. The chromaticity coordinates (x, y) is derived from the 1931 CIE chromaticity diagram. 4. Caution in ESD: Static Electricity and surge damages the LED. It is recommend to use a wrist band or anti-electrostatic glove when handling the LED. All devices, equipment and machinery must be properly grounded. 5. CAS140B is the test standard for the chromaticity coordinates (x, y) 6. Chromaticity coordinates (x, y) is tested by IS. 7. The chromaticity coordinates (x, y) guarantee should be added +/- 0.005 tolerance. Part No. : LTW-089E2CG-A Page : 3 of 13 BNS-OD-C131/A4

A ll data sheet.com LITE-ON TECHNOLOGY CORPORATION P r o p e r t y o f L i t e - O n O n l y Bin Code List Part No. : LTW-089E2CG-A Page : 4 of 13 BNS-OD-C131/A4 Luminous Spec. Table Flux (lm) and IV (mcd) at IF = 20mA lm mcd IV Bin Min. Max. Min. Max. 5 4.0 4.3 1550 1650 6 4.3 4.6 1650 1750 7 4.6 4.9 1750 1850 8 4.9 5.3 1850 2000 9 5.3 5.7 2000 2150 10 5.7 6.1 2150 2300 11 6.1 6.6 2300 2500 Tolerance on each Luminous Intensity bin and Luminous Flux are +/- 7%, and IV (mcd) is for reference.

A ll data sheet.com LITE-ON TECHNOLOGY CORPORATION P r o p e r t y o f L i t e - O n O n l y Color Spec. Table @20mA Color Coordinates Measurement allowance is ±0.005 Part No. : LTW-089E2CG-A Page : 5 of 13 BNS -OD-C131/A4 CA1 CA2 CA3 CA4 x y x y x y x y CB1 CB2 CB3 CB4 CC1 CC2 CC3 CC4 CD1 CD2 CD3 CD4 CE1 CE2 CE3 CE4 EA1 EA2 EA3 EA4 x y x y x y x y EB1 EB2 EB3 EB4 EC1 EC2 EC3 EC4 ED1 ED2 ED3 ED4 EE1 EE2 EE3 EE4

A ll data sheet.com LITE-ON TECHNOLOGY CORPORATION P r o p e r t y o f L i t e - O n O n l y Color Spec. Table @20mA Color Coordinates Measurement allowance is ±0.005 Part No. : LTW-089E2CG-A Page : 6 of 13 BNS-OD-C131/A4 WA1 WA2 WA3 WA4 x y x y x y x y WB1 WB2 WB3 WB4 WC1 WC2 WC3 WC4 WD1 WD2 WD3 WD4 WE1 WE2 WE3 WE4 MA1 MA2 MA3 MA4 x y x y x y x y MB1 MB2 MB3 MB4 MC1 MC2 MC3 MC4 MD1 MD2 MD3 MD4 ME1 ME2 ME3 ME4

A ll data sheet.com LITE-ON TECHNOLOGY CORPORATION P r o p e r t y o f L i t e - O n O n l y Typical Electrical / Optical Characteristics Curves (25°° °°C Ambient Temperature Unless Otherwise Noted) Part No. : LTW-089E2CG-A Page : 7 of 13 BNS-OD-C131/A4

A ll data sheet.com LITE-ON TECHNOLOGY CORPORATION P r o p e r t y o f L i t e - O n O n l y User Guide Cleaning Do not use unspecified chemical liquid to clean LED they could harm the package. If cleaning is necessary, immerse the LED in ethyl alcohol or isopropyl alcohol at normal temperature for less one minute. Recommend Printed Circuit Board Attachment Pad Infrared / vapor phase Reflow Soldering Package Dimensions of Tape Note: 1.All dimensions are in millimeters (inches). Part No. : LTW-089E2CG-A Page : 8 of 13 BNS-OD-C131/A4

A ll data sheet.com LITE-ON TECHNOLOGY CORPORATION P r o p e r t y o f L i t e - O n O n l y Package Dimensions of Reel Notes: 1. Empty component pockets sealed with top cover tape. 2. 7 inch reel-2000 pieces per reel. 3. The maximum number of consecutive missing lamps is two. 4. In accordance with EIA-481-1-B specifications. Vacate 20 cm (min) on start of packing tape and vacate 50 cm (min) on last of packing tape. Part No. : LTW-089E2CG-A Page : 9 of 13 BNS-OD-C131/A4

A ll data sheet.com LITE-ON TECHNOLOGY CORPORATION P r o p e r t y o f L i t e - O n O n l y Part No. : LTW-089E2CG-A Page : 10 of 13 BNS-OD-C131/A4 CAUTIONS 1. Application The LEDs described here are intended to be used for ordinary electronic equipment (such as office equipment, communication equipment and household applications).Consult Liteon’s Sales in advance for information on applications in which exceptional reliability is required, particularly when the failure or malfunction of the LEDs may directly jeopardize life or health (such as in aviation, transportation, traffic control equipment, medical and life support systems and safety devices). 2. Storage This product is qualified as Moisture sensitive Level 3 per JEDEC J-STD-020 Precaution when handing this moisture sensitive product is important to ensure the reliability of the product. The package is sealed: The LEDs should be stored at 30°C or less and 90%RH or less. And the LEDs are limited to use within one year, while the LEDs is packed in moisture-proof package with the desiccants inside. The package is opened: The LEDs should be stored at 30°C or less and 60%RH or less. Moreover, the LEDs are limited to solder process within 168hrs. If the Humidity Indicator shows the pink color in 10% even higher or exceed the storage limiting time since opened, that we recommended to baking LEDs at 60°C at least 48hrs. To seal the remainder LEDs return to package, it’s recommended to be with workable desiccants in original package. 3. Cleaning Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED if necessary. 4. Soldering Recommended soldering conditions: Reflow soldering Soldering iron Pre-heat Pre-heat time Peak temperature Soldering time 120~150°C 120 sec. Max. 260°C Max. 30 sec. Max. Temperature Soldering time 300°C Max. 3 sec. Max. (one time only) 5. Drive Method An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs connected in parallel in an application, it is recommended that a current limiting resistor be incorporated in the drive circuit, in series with each LED as shown in Circuit A below. Circuit model A Circuit model B LED LED (A) Recommended circuit. (B) The brightness of each LED might appear different due to the differences in the I-V characteristics of those LEDs. 6. ESD (Electrostatic Discharge) Static Electricity or power surge will damage the LED. Suggestions to prevent ESD damage:

A ll data sheet.com LITE-ON TECHNOLOGY CORPORATION P r o p e r t y o f L i t e - O n O n l y Part No. : LTW-089E2CG-A Page : 11 of 13 BNS-OD-C131/A4 /square6 U se of a conductive wrist band or anti-electrostatic glove when handling these LEDs. /square6 A ll devices, equipment, and machinery must be properly grounded. /square6 W ork tables, storage racks, etc. should be properly grounded. /square6 U se ion blower to neutralize the static charge which might have built up on surface of the LED’s plastic lens as a result of friction between LEDs during storage and handling. ESD-damaged LEDs will exhibit abnormal characteristics such as high reverse leakage current, low forward voltage, or “ no lightup ” at low currents. To verify for ESD damage, check for “ lightup ” and Vf of the suspect LEDs at low currents. The Vf of “ good ” LEDs should be >2.0V@0.1mA for InGaN product 7. Reliability Test Temperature Humidity Criteria for judgment No Items (℃) (%) Other condition Hrs Times Sampling LED brightness @ 20mA Vf @ 20mA High temperature storage Temperature humidity storage

3 Low temp Storage -40 ----- 1000 30 >70% <110%

Life Condition 1 25 IF =20mA 1000 30 >70% <110% Steady State Operating Life Condition 2 25 IF =30mA 500 30 >70% <110% Steady State Operating Life of High Temperature

85 IF =20mA 500 30 >70% <110%

60 90 IF =20mA 500 30 >70% <110% Steady State Operating Life of Low Temperature -30 IF =20mA 1000 30 >70% <110% IF =20mA

9 On/Off testing 60

/10secOFF 35000 circular Continue 195 30 >50% <110% -30℃ ~ 85℃ 0.5hr. 0.5hr 200 cycles 30 >70% <110%

11 Thermal Cycle [1] [1] [1] 152 hours/2

cycles 1 30 >70% <110% Resistance to Soldering Heat (Reflow Soldering) TSld = 260℃, 10sec. 2 30 < ±5% < ±5%

13 Vibration [3] Room Temp

Random, 1.5Grms, 10~200Hz, for 30 min changeable vibration per circular X,Y,Z 3 directions 30 min /time 1 30 Go or not Go

A ll data sheet.com LITE-ON TECHNOLOGY CORPORATION P r o p e r t y o f L i t e - O n O n l y [1] The thermal profile is shown below 8. Estimated Life time (*1)Life time means that estimated time to 50% degradation of initial luminous intensity. (*2)Using testing circuit board: Test board dimension: 25x25x1 mm3 (L x W x H) Material: FR4 Item Test Condition Min. Typ. Max. Unit Life time(*1) Ta=60 IF=20mA Tj℃ ≦70℃(*2) 10000 - - hrs Part No. : LTW-089E2CG-A Page : 12 of 13 BNS-OD-C131/A4

A ll data sheet.com LITE-ON TECHNOLOGY CORPORATION P r o p e r t y o f L i t e - O n O n l y 9. Others The appearance and specifications of the product may be modified for improvement without prior notice. 10. Suggested Checking List Training and Certification 1. Everyone working in a static-safe area is ESD-certified? 2. Training records kept and re-certification dates monitored? Static-Safe Workstation & Work Areas 1. Static-safe workstation or work-areas have ESD signs? 2. All surfaces and objects at all static-safe workstation and within 1 ft measure less than 100V? 3. All ionizer activated, positioned towards the units? 4. Each work surface mats grounding is good? Personnel Grounding 1. Every person (including visitors) handling ESD sensitive (ESDS) items wear wrist strap, heel strap or conductive shoes with conductive flooring? 2. If conductive footwear used, conductive flooring also present where operator stand or walk? 3. Garments, hairs or anything closer than 1 ft to ESD items measure less than 100V*? 4. Every wrist strap or heel strap/conductive shoes checked daily and result recorded for all DLs? 5. All wrist strap or heel strap checkers calibration up to date? Note: *50V for Blue LED. Device Handling 1. Every ESDS items identified by EIA-471 labels on item or packaging? 2. All ESDS items completely inside properly closed static-shielding containers when not at static- safe workstation? 3. No static charge generators (e.g. plastics) inside shielding containers with ESDS items? 4. All flexible conductive and dissipative package materials inspected before reuse or recycle? Others 1. Audit result reported to entity ESD control coordinator? 2. Corrective action from previous audits completed? 3. Are audit records complete and on file? Part No. : LTW-089E2CG-A Page : 13 of 13 BNS-OD-C131/A4