LTV-703V LITEON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
High collector-emitter voltage(VCEO=70V) High input-output isolation voltage: (VISO : 5,000Vrms) Directly connectable to TTL UL approved (No. E113898) TUV approved (No.R9653630) CSA approved (No. CA91533-1) FIMKO approved (No. 193422) NEMKO approved (No. P96103013) DEMKO approved (No. 303968) SEMKO approved (No. 9646047/01-30) VDE approved (No. 094722) Options available : -Leads with 0.4"(10.16mm)spacing (M Type) -Leads bends for surface mounting(S Type) -Tape and Reel of Type I for SMD(Add"-TA"Suffix) -Tape and Reel of Type II for SMD(Add"-TA1"Suffix) -VDE 0884 approvals (Add"-V"Suffix)
Applications
- Telephone sets, telephone exchangers. 2. System appliances, measuring instruments. 3. Signal transmission between circuits of different potentialsand impedances.
Ordering Information
6-pin (leads with 0.4" spacing) 6-pin (lead bends for surface mount) 6-pin (tape and reel packaging of type I) 6-pin (tape and reel packaging of type II) 6-pin DIP 6-pin (leads with 0.4" spacing) 6-pin (lead bends for surface mount) 6-pin (tape and reel packaging of type I) 6-pin (tape and reel packaging of type II) UL approved NEMKO approved TUV approved SEMKO approved CSA approved DEMKO approved FIMKO approved VDE approved LTV - 703V LTV - 703V
Absolute Maximum Ratings (Ta=25 Parameter Symbol Rating Unit Input Output Total Power Dissipation Operating Temperature Storage Temperature *1.Isolation Voltage *2.Soldering Temperature Forward Current Reverse Voltage Power Dissipation Collector-Emitter Voltage Emitter-Collector Voltage Collector Current Collector Power Dissipation Collector-Base Voltage Emitter-Base Voltage IF VR P VCEO VECO IC PC VCBO VEBO Ptot Topr Tstg Viso Tsol 160 200 -30~+100 -55~+125 260 mA V mW V V mA mW V V mW KVrms *1. AC for 1 minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1)Short between anode and cathode on the primary side and between collector, emitter and base on the secondary side. (2)The isolation voltage tester with zero-cross circuit shall be used. (3)The waveform of applied volttage shall be a sine wave. *2. For 10 seconds. Electrical/Optical Characteristics (Ta=25 Parameter Symbol Min. Typ. Max. Unit Conditions Input Output Transfer Characteristics Forward Voltage Reverse Current Terminal Capacitance Collector Dark Current Collector-Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage Collector-Base Breakdown Voltage Collector Current *Current Transfer Ratio Collector-emitter Saturation Voltage Isolation Resistance Floating Capacitance Cut-off Frequency Response Time (Rise) Response Time (Fall) VF IR Ct ICEO BVCEO BVECO BVCBO IC CTR VCE(sat) RISO Cf fc tr tf 1010 1.2 0.1 1011 0.6 1.4 250 100 320 0.2 1.0 V A pF nA V V V mA V pF KHz s s IF=20mA VR=4V V=0, f=1KHz VCE=20V IC=0.1mA IE=10 A IC=0.1mA IF=10mA VCE=5V IF=10mA VCE=5V IF=20mA, IC=1mA DC500V, 40~60% R.H. V=0, f=1MHz VCE=5V, IC=2mA RL=100 , -3dB VCE=2V, IC=2mA RL=100 *CTR= 100% IC IF
Typical Electrical/Optical Characteristic Curves (25 Ambient Temperature Unless Otherwise Noted) Supplement Rank Table of Current Transfer Ratio CTR Model No. Rank Mark CTR(%) LTV-703V LTV-703V LTV-703V LTV-703V LTV-703V A B C D A or B or C or D 40~80 63~125 100~200 160~320 40~320 Conditions IF=10mA VCE=5V Ta=25