SMC10 LITEON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

All Dimensions in millimeter SMC DIM. MIN. MAX. A C D E F G H B 6.60 7.11 6.22 5.59 2.92 3.18 0.31 0.15 7.75 8.13 0.05 0.20 2.01 2.62 0.76 1.52 C H E F G D B A

FEATURES

For surface mounted applications Reliable low cost construction utilizing molded plastic technique Plastic material has UL flammability classification 94V-O Typical IR less than 1uA above 10V Fast response time: typically less than 1.0ps for Uni-direction,less than 5.0ns for Bi-direction,form 0 Volts to BV min MECHANICAL DATA Case : Molded plastic Polarity : by cathode band denotes uni-directional device none cathode band denotes bi-directional device Weight : 0.007 ounces, 0.21 gram TJOperating Temperature Range -55 to +150 TSTGStorage Temperature Range -55 to +175 C IFSM Peak Forward Surge Current 8.3ms single half sine-wave super imposed on rated load (Note 3) 200 AMPS. UNIT PM(AV) 5.0 WATTSSteady State Power Dissipation at T L =75 C PPK WATTSPEAK POWER DISSIPATION AT T A = 25 C, TP = 1ms (Note 1,2) SYMBOLS VALUE Minimum 1500 C CHARACTERISTICS (JEDEC METHOD) SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS STAND-OFF VOLTAGE - 6.8 to 200 Volts POWER DISSIPATION - 1500 WATTS Maximum Instantaneous forward voltage at 100A for unidirectional devices only (Note 3) VF Volts NOTES : 1. Non-repetitive current pulse, per fig. 3 and derated above TA= 25 C per fig.1. 2. Thermal Resistance junction to Lead 3. 8.3ms single half-sine wave duty cycle= 4 pulses maximum per minute (unidirectional units only). SEE NOTE 4 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% SEMICONDUCTOR LITE-ON REV. 2, 01-Dec-2000, KSIC01

RATING AND CHARACTERISTIC CURVES SMC SERIES FIG.1 - PULSE DERATING CURVE PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT 25 75 100 125 150 100 0 175 200

10 X 1000 WAVEFORM

AS DEFINED BY R.E.A. FIG.5 - PULSE RATING CURVE PP, PEAK POWER ( KW ) TP, PULSE WIDTH 0.1 1.0 0.1us 1.0us 10us 100us 1.0ms 10ms 100 TA=150 C FIG.3 - PULSE WAVEFORM FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT NUMBER OF CYCLES AT 60Hz PEAK FORWARD SURGE CURRENT, AMPERES15 1 0 5 0 1 0 02 20 Pulse Width 8.3ms Single Half-Sine-Wave (JEDEC METHOD) 100 200 5.0mm LEAD AREAS NON-REPETITIVE PULSE WAVEFORM SHOWN IN FIG 3. PM(AV) STEADY STATE POWER DISSIPATION (W) FIG.6 - STEADY STATE POWER DERATING CURVE TL, LEAD TEMPERATURE 25 75 100 125 150 0.0 500 175 200 1.0 2.0 3.0 4.0 5.0 60Hz RESISTIVE OR INDUCTIVE LOAD CAPACITANCE , (pF) STAND-OFF VOLTAGE, VOLTS 101 100 10000 1000 100 1000 Bi-directional TJ = 25 C Uni-directional FIG.4 - TYPICAL JUNCTION CAPACITANCE AMBIENT TEMPERATURE, ℃ IP, PEAK PULSE CURRENT , (% ) T , TIME ( ms ) 100 1.0 2.0 3.0 4.0 TR=10us Peak value (I RSM) TP 10 x 1000 waveform as defined by R.E.A. Pulse width (TP) is defined as that point where the peak current decays to 50% of IRSM TJ=25 C IRSM

2 Half value=

REV. 2, 01-Dec-2000, KSIC01

(Clamping Voltage) (UNI) (BI) Min. Max. @IT( mA) V RWM(Volts) IR (uA) I RSM(Amps) V RSM(Volts) Device Uni- directional Device Bi- directional Device Marking code SEMICONDUCTOR LITE-ON

(Clamping Voltage) (UNI) (BI) Min. Max. @IT( mA) V RWM(Volts) IR (uA) I RSM(Amps) V RSM(Volts) SMC110A SMC110CA FZK FZM 105 116 1.0 94.0 5.0 9.87 152 SMC120 SMC120C GDK GDM 108 132 1.0 97.2 5.0 8.67 173 SMC120A SMC120CA GEK GEM 114 126 1.0 102 5.0 9.09 165 SMC130 SMC130C GFK GFM 117 143 1.0 105 5.0 8.02 187 SMC130A SMC130CA GGK GGM 124 137 1.0 111 5.0 8.38 179 SMC150 SMC150C GHK GHM 135 165 1.0 121 5.0 6.98 215 SMC150A SMC150CA GKK GKM 143 158 1.0 128 5.0 7.25 207 SMC160 SMC160C GLK GLM 144 176 1.0 130 5.0 6.52 230 SMC160A SMC160CA GMK GMM 152 168 1.0 136 5.0 6.85 219 SMC170 SMC170C GNK GNM 153 187 1.0 138 5.0 6.15 244 SMC170A SMC170CA GPK GPM 162 179 1.0 145 5.0 6.41 234 SMC180 SMC180C GQK GQM 162 198 1.0 146 5.0 5.81 258 SMC180A SMC180CA GRK GRM 171 189 1.0 154 5.0 6.10 246 SMC200 SMC200C GSK GSM 180 220 1.0 162 5.0 5.23 287 SMC200A SMC200CA GTK GTM 190 210 1.0 171 5.0 5.47 274 NOTE : 1) Suffix 'A ' denotes 5% tolerance device,no suffix denotes 10 % tolerance device. 2) Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices. 3) For Bi-Directional devices having VR of 10 volts and under, the IR limit is double . Device Uni- directional Device Bi- directional Device Marking code