LTV702FM-V LITEON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only

FEATURES

  1. This specification shall be applied to photocoupler. Model No. LTV-817 as an option. 2. Applicable Models (Business dealing name) * Dual-in-line package : LTV702V-V * Wide lead spacing package : LTV702VM-V * Surface mounting package : LTV702VS-V * Tape and reel packaging : LTV702VSTA1-V 3. The relevant models are the models Approved by VDE according to DIN VDE 0884:1992-06 Approved Model No.: LTV-702V / LTV-702VM / LTV-702VS VDE approved No.: 094722 (According to the specification DIN VDE 0884:1992-06) * Operating isolation voltage V IORM : 700V (Peak) * Transient voltage VTR : 6000V (Peak) * Pollution : 2 (According to VDE 0110-1 : 1997-04) * Clearances distance (Between input and output) : 7.0mm (MIN.) * Creepage distance (Between input and output) : 7.0mm (MIN.) * Isolation thickness between input and output : 0.4mm (MIN.) * Safety limit values Current (Isi) : 400mA (Diode side) Power (Psi) : 700mW (Phototransistor side) Temperature(Tsi) : 175 oC In order to keep safety electric isolation of photocoupler, please set the protective circuit to keep within safety limit values when the actual application equipment troubled. * Indication of VDE 0884 approval prints " " on sleeve package. Part No. : LTV702V ( M, S, STA1 )-V Page : 1 of 12 BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only OUTLINE DIMENSIONS LTV702V-V : LTV702VM-V : *1. Year date code. *2. 2-digit work week. *3. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China). *4. Rank shall be or shall not be marked. Part No. : LTV702V ( M, S, STA1 )-V Page : 2 of 12 BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only OUTLINE DIMENSIONS LTV702VS-V : *1. Year date code. *2. 2-digit work week. *3. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China). *4. Rank shall be or shall not be marked. Part No. : LTV702V ( M, S, STA1 )-V Page : 3 of 12 BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only TAPING DIMENSIONS LTV702VSTA1-V : Description Symbol Dimensions in mm ( inches ) Tape wide W 16 ± 0.3 ( .63 ) Pitch of sprocket holes P 0 4 ± 0.1 ( .15 ) Distance of compartment F 7.5 ± 0.1 ( .295 ) 2 ± 0.1 ( .079 ) Distance of compartment to compartment P 1 12 ± 0.1 ( .472 ) Part No. : LTV702V ( M, S, STA1 )-V Page : 4 of 12 BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only ABSOLUTE MAXIMUM RATING ( Ta = 25°C ) PARAMETER SYMBOL RATING UNIT Forward Current I F 60 mA Reverse Voltage V R 6 V INPUT Power Dissipation P 105 mW Collector - Emitter Voltage V CEO 70 V Emitter - Collector Voltage V ECO 6 V Collector - Base Voltage V CBO 70 V Emitter - Base Voltage V EBO 6 V Collector Current I C 50 mA OUTPUT Collector Power Dissipation P C 160 mW Total Power Dissipation P tot 200 mW *1 Isolation Voltage V iso 5,000 Vrms Operating Temperature T opr -55 ~ +100 °C Storage Temperature T stg -55 ~ +150 °C *2 Soldering Temperature T sol 260 °C *1. AC For 1 Minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector, emitter and base on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. *2. For 10 Seconds Part No. : LTV702V ( M, S, STA1 )-V Page : 5 of 12 BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only ELECTRICAL - OPTICAL CHARACTERISTICS ( Ta = 25°C ) PARAMETER SYMBOL MIN. TYP. MAX. UNIT CONDITIONS Forward Voltage V F — 1.4 1.7 V I F=60mA Reverse Current I R — — 10 µA VR=6V INPUT Terminal Capacitance C t — 30 250 pF V=0, f=1KHz Collector Dark Current I CEO — — 50 nA V CE=10V, IF=0 Collector-Emitter Breakdown Voltage BVCEO 70 — — V IC=0.1mA IF=0 Emitter-Collector Breakdown Voltage BVECO 6 — — V IE=10µA IF=0 OUTPUT Collector-Base Breakdown Voltage BVCBO 70 — — V IC=0.1mA IF=0 Collector Current I C 4 — 32 mA * Current Transfer Ratio CTR 40 — 320 % IF=10mA VCE=5V Collector-Emitter Saturation Voltage VCE(sat) — 0.25 0.4 V IF=10mA IC=2.5mA Isolation Resistance R iso 5×1010 1×1011 — Ω DC500V 40 ~ 60% R.H. Floating Capacitance C f — 0.6 1 pF V=0, f=1MHz Cut-Off Frequency f c — 150 — kHz VCC=5V, IF=10mA RL=75Ω,-3dB Response Time (Rise) t r — 2 7 µs TRANSFER CHARACTERISTICS Response Time (Fall) t f — 2 8 µs VCC=5V, IF=10mA RL=75Ω * CTR I I 100%C F Part No. : LTV702V ( M, S, STA1 )-V Page : 6 of 12 BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only RANK TABLE OF CURRENT TRANSFER RATIO CTR MODEL NO. RANK MARK CTR ( % ) A 40 ~ 80 B 63 ~ 125 C 100 ~ 200 D 160 ~ 320 LTV702V-V A or B or C or D or No mark 40 ~ 320 CONDITIONS IF = 10 mA VCE = 5 V Ta = 25 °C Part No. : LTV702V ( M, S, STA1 )-V Page : 7 of 12 BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only ISOLATION SPECIFICATION ACCORDING TO VDE 0884 Parameter Symbol Conditions Rating Unit Remark Class of environmental test - DIN IEC68 55/100/21 - Pollution - DIN VDE0110 2 - Maximum Operating Isolation Voltage VIORM - 700 V PEAK Diagram 1 tp=60s, qc<5pC 1050 V PEAK Partial Discharge Test Voltage (Between Input and Output) Diagram 2 Vpr tp=1s, qc<5pC 1313 V PEAK Maximum Over-voltage V INITIAL tINI = 10s 6000 V PEAK Refer to the Diagram 1, 2 Safety Maximum Ratings 1) Case Temperature Tsi I F = 0, Pc = 0 175 oC 2) Input Current Isi Pc=0 400 mA 3) Electric Power (Output or Total Power Issipation) Psi - 700 mW Refer to the Figure 1, 3 Ta=Tsi MIN.10 9 Ta=Topr(MAX.) MIN.10 11 Isolation Resistance (Test Voltage Between Input and Output : DC500V) R ISO Ta=25 oC MIN.1012 Ω Precautions in performing isolation test * Partial discharge test methods shall be the ones according to the specifications of VDE 0884:1992-06 * Please don't carry out isolation test (Viso) over VINITIAL ,This product deteriorates isolation characteristics by partial discharge due to applying high voltage (ex. VINITIAL ). And there is possibility that this product occurs partial discharge in operating isolation voltage (VIORM) Part No. : LTV702V ( M, S, STA1 )-V Page : 8 of 12 BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only PARTIAL DISCHARGE TEST METHOD tinit1 tp tb V VINTIAL prV IORMV t t3 tp tb V prV IORMV t Method (A) for type testing and random testing. Method (B) for routine testing. t1, t2 = 1 to 10s t3, t4 = 1s tp (Partial Discharge Measuring Time)= 60s tb = 62s tini = 10s t3, t4 = 0.1s tp (Partial Discharge Measuring Time)= 1s tb = 1.2s The partial discharge level shall not exceed 5 pC during the partial discharge measuring time interval tp under the test conditions shown above. Part No. : LTV702V ( M, S, STA1 )-V Page : 9 of 12 BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only CHARACTERISTICS CURVES Fig.1 Forward Current vs. Fig.2 Collector Power Dissipation vs. Ambient Temperature Fig.4 Forward Current vs. Fig.5 Current Transfer Ratio vs. Forward Current Fig.6 Collector Current vs. Collector-emitter Voltage Forward voltage V (V) Forward current I (mA) F F CE F Forward current I (m F -55 Ta= 75 C

50 C 25 C

-25 C Ta= 25 C I = 30mA Pc(MAX.) 5mA 10mA 20mA F R = 500k 100k 2mA Ambient Temperature Forward current I (m Ambient temperature Ta ( C) Ambient temperature Ta ( C) Collector power dissipation Pc (m W Collector current Ic (m Current transfer ratio CTR (% Collector-emitter voltage V (V) -25 0 25 50 75 100 125 50 -25-55 0 25 125 75 100 200 100 150 160 100 200 500 02468 1 0 2 5 10 20 50 100 120 140 160 200 180 Forward Voltage o o o o o o o oo Fig.3 Collector-emitter Saturation Voltage vs. Forward Current Forward current I (mA)F Collector-em itter saturation voltage V (sat) (V) 2mA 3mA 1mA 5mA Ic= 0.5mA Ta= 25 C o VCE=5 V Ta= 25 C Part No. : LTV702V ( M, S, STA1 )-V Page : 10 of 12 BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only CHARACTERISTICS CURVES Fig.11 Frequency Response Fig.9 Collector Dark Current vs. Voltage gain Av (dB) Frequency f (kHz) -10 0.5 1 25 1 0 2 0 R = 200 50010050 200 150 75 Ambient temperature Ta ( C) Collector dark current I (A) -30 -13 -12 2004 0 Ambient Temperature CEO -11 -10 100 Vcc= 5V I = 10mA Ta= 25 C F o o 60 80 90% Test Circuit for Frequency Response Output Vcc td tr tf ts Output Test Circuit for Response Time Load resistance RL (k ) Load Resistance Fig.10 Response Time vs. Response tim e ( 0.5 0.02 Input Vcc 0.05 Output Input 0.1 0.2 10% 0.5 tr tf o Fig.7 Relative Current Transfer Ratio vs. Ambient temperature Ta ( C) Relative current transfer ratio (% -55 100 0-25 25 Ambient Temperature 150 100 o 7550 vs. Ambient Temperature Ambient temperature Ta ( C) Fig.8 Collector-emitter Saturation Voltage Collector-em itter saturation voltage 0.14 0.12 0.10 0.08 0.06 0.04 0.02 -55 V (sat) (V) -25 0 0.16 7525 50 o 100 RD RL RD RL IF=1 0 m A VCC=5 V Ta= 25 C IF=1 0 m A VCE=5 V IF= 10mA IC=2 . 5 m A VCE=1 0 V Part No. : LTV702V ( M, S, STA1 )-V Page : 11 of 12 BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only RECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Unit : mm Part No. : LTV702V ( M, S, STA1 )-V Page : 12 of 12 BNS-OD-C131/A4