LTV-217-G-CL LITEON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 12
Technical content
Part No.: LTV-217-G-CL BNC-OD-C131/A4 1. DESCRIPTION
1.1 Features
Current transfer ratio (CTR) : Min. 50% at IF = 5mA, VCE = 5V High input-output isolation voltage. (Viso=3,750Vrms) Employs double transfer mold technology Safety approval: UL 1577, Cert. No.E113898; CSA CA5A, Cert. No.1243207 (CA 91533); FIMKO EN/IEC 60950 -1, EN/IEC 60065; Cert. No. FI 24472 M1; VDE DIN EN60747 -5-2, Cert. No.138213 Halogen Free RoHS Compliance: All materials be used in device are followed EU RoHS directive (No.2002/95/EC). ESD pass HBM 6000V/MM2000V MSL class1
1.2 Applications
Hybrid substrates that require high density mounting. Programmable controllers System appliances, measuring instruments 2. PACKAGE DIMENSIONS Part No : LTV-217-G Notes : 1. 3-digit date code. 2. Rank shall be or shall not be marked. 3. VDE mark only appears on devices ordered “V” option.
Part No.: LTV-217-G-CL BNC-OD-C131/A4 3. TAPING DIMENSIONS
3.1 P/N : LTV-217-TP1-G
3.2 Quantities per Reel
Description Symbol Dimension in mm (inch) Tape wide W 12±0.3 (0.47) Pitch of sprocket holes P0 4±0.1 (0.15) Distance of compartment F 5.5±0.1 (0.217) P2 2±0.1 (0.079) Distance of compartment to compartment P1 8±0.1 (0.315) Package Type LTV-217 Quantities (pcs) 3000 Description Symbol Dimension in mm (inches) Tape wide W Pitch of sprocket holes P0 Distance of compartment F Distance of compartment to compartment P1
Part No.: LTV-217-G-CL BNC-OD-C131/A4 4. RATING AND CHARACTERISTICS
4.1 Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Rating Unit Input Forward Current IF 50 mA Reverse Voltage VR 6 V Power Dissipation P 70 mW Output Collector - Emitter Voltage VCEO 80 V Emitter - Collector Voltage VECO 7 V Collector Current IC 50 mA Collector Power Dissipation PC 150 mW Total Power Dissipation Ptot 200 mW 1. Isolation Voltage Viso 3750 Vrms Operating Temperature Topr -55 ~ +110 oC Storage Temperature Tstg -55 ~ +150 oC Soldering Temperature Tsol 260(10s) oC 1. AC For 1 Minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and b etween collector and emitter on the secondary side. (2) The isolation voltage tester with zero -cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave.
Part No.: LTV-217-G-CL BNC-OD-C131/A4
4.2 ELECTRICAL OPTICAL CHARACTERISTICS at Ta=25° C
Parameter Symbol Min. Typ. Max. Unit Test Condition Input Forward Voltage VF — 1.2 1.4 V IF=20mA Reverse Current IR — — 10 A VR=4V Terminal Capacitance Ct — 30 250 pF V=0, f=1KHz Output Collector Dark Current ICEO — — 100 nA VCE=20V, IF=0 Collector-Emitter Breakdown Voltage BVCEO 80 — — V IC=0.1mA, IF=0 Emitter-Collector Breakdown Voltage BVECO 7 — — V IE=10A, IF=0 TRANSFER CHARACTERISTICS Collector Current IC 10 — 20 mA IF=5mA VCE=5V 1. Current Transfer Ratio CTR 200 — 400 % Collector-Emitter Saturation Voltage VCE(sat) — — 0.4 V IF=8mA, IC=2.4mA Isolation Resistance Riso 51010 11011 — DC500V, 40 ~ 60% R.H. 40 ~ 60% R.H. Floating Capacitance Cf — 0.6 1 pF V=0, f=1MHz Response Time (Rise) tr — 2 — s VCE=10V, IC=2mA RL=100, f=100Hz Response Time (Fall) tf — 3 — s 100% I I CTR F C
Part No.: LTV-217-G-CL BNC-OD-C131/A4 MODEL NO. CTR Rank Min Max Condition LTV-217 A 80 160 IF=5mA, VCE5V, Ta=25oC A1 100 160 B 130 260 C 200 400 D 300 600 A or B or C or D or No mark 50 600 5. RANK TABLE OF CURRENT TRANSFER RATIO CTR
Part No.: LTV-217-G-CL BNC-OD-C131/A4 7. SWITCHING TIME TEST CIRCUIT RL t t ts 0.5V 4.5V Vcc VCE IF VCE Vcc ON OFF 8. TEMPERATURE PROFILE OF SOLDERING
8.1 IR Reflow soldering (JEDEC-STD-020C compliant)
One time soldering reflow is recommended within the condition of temperature and time profile shown below. Do not solder more than three times. Profile item Conditions Preheat - Temperature Min (TSmin) - Temperature Max (TSmax) - Time (min to max) (ts) 150˚C 200˚C 90±30 sec Soldering zone - Temperature (TL) - Time (tL) 217˚C 60 sec Peak Temperature (TP) 260˚C Ramp-up rate 3˚C / sec max. Ramp-down rate 3~6˚C / sec
Part No.: LTV-217-G-CL BNC-OD-C131/A4 60 ~ 120 sec 25 C 150 C 200 C 260 C 217 C 60 sec Time (sec) Temperature ( C) 20 sec Tsmax ts (Preheat) tL (Soldering) Tsmin TL TP Ramp-down Ramp-up 35~70 sec
8.2 Wave soldering (JEDEC22A111 compliant)
One time soldering is recommended within the condition of temperature. Temperature: 260+0/-5˚C Time: 10 sec. Preheat temperature:25 to 140˚C Preheat time: 30 to 80 sec.
Part No.: LTV-217-G-CL BNC-OD-C131/A4
8.3 Hand soldering by soldering iron
Allow single lead soldering in every single process. One time soldering is recommended. Temperature: 380+0/-5˚C Time: 3 sec max. 9. RRECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Unit: mm
Part No.: LTV-217-G-CL BNC-OD-C131/A4 10. Notes: LiteOn is continually improving the quality, reliability, function or design and LiteOn reserves the right to make changes without further notices. The products shown in this publication are designed for the general use in electronic applications such as office automation equipment, communications devices, audio/visual equipment, electr ical application and instrumentation. For equipment/devices where high reliability or safety is required, such as space applications, nuclear power control equipment, medical equipment, etc, please contact our sales representatives. When requiring a device for any ”specific” application, please contact our sales in advice. If there are any questions about the contents of this publication, please contact us at your convenience. The contents described herein are subject to change without prior notice. Immerge unit’s body in solder paste is not recommended.