LTS-4510AG LITEON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto LED Display Product Data Sheet LTS-4510AG Spec No.: DS-30-96-165 Effective Date: 04/19/2000 Revision: - BNS-OD-FC001/A4 BNS-OD-FC001/A4 BNS-OD-FC001/A4 BNS-OD-FC001/A4

LITE-ON ELECTRONICS, INC. Property of Lite-On Only PART NO.:LTS-4510AG PAGE: 1 of 5 BNS-OD-C131/A4

FEATURES

＊0.4-inch (10.16mm) DIGIT HEIGHT. ＊CONTINUOUS UNIFORM SEGMENTS. ＊LOW POWER REQUIREMENT. ＊EXCELLENT CHARACTERS APPEARANCE. ＊HIGH BRIGHTNESS & HIGH CONTRAST. ＊WIDE VIEWING ANGLE. ＊SOLID STATE RELIABILITY. ＊CATEGORIZED FOR LUMINOUS INTENSITY.

DESCRIPTION

The LTS -4510AG is a 0.4-inch ( 10.16mm) digit height single digit seven-segment display. This device utilizes green LED chips, which are made from GaP on GaP substrate, and has a gray face and white segments. DEVICE PART NO. DESCRIPTION GREEN Common Anode Rt. Hand Decimal LTS-4510AG

LITE-ON ELECTRONICS, INC. Property of Lite-On Only PART NO.:LTS-4510AG PAGE: 2 of 5 BNS-OD-C131/A4 PACKAGE DIMENSIONS NOTES: All dimensions are in millimeters. Tolerance is  0.25 mm (0.01“) unless otherwise noted. INTERNAL CIRCUIT DIAGRAM

LITE-ON ELECTRONICS, INC. Property of Lite-On Only PART NO.:LTS-4510AG PAGE: 3 of 5 BNS-OD-C131/A4 PIN CONNECTION No. CONNECTION

1 CATHODE A

2 CATHODE F

3 COMMON ANODE

4 NO PIN

5 NO PIN

6 NO PIN

7 CATHODE E

8 CATHODE D

9 CATHODE D.P

10 CATHODE C

11 CATHODE G

12 NO PIN

13 CATHODE B

14 COMMON ANODE

LITE-ON ELECTRONICS, INC. Property of Lite-On Only PART NO.:LTS-4510AG PAGE: 4 of 5 BNS-OD-C131/A4 ABSOLUTE MAXIMUM RATING AT Ta=25oC PARAMETER MAXIMUM RATING UNIT Power Dissipation Per Segment 75 mW Peak Forward Current Per Segment ( 1/10 Duty Cycle, 0.1ms Pulse Width ) 100 mA Continuous Forward Current Per Segment Derating Linear From 25℃ Per Segment 0.33 mA mA/℃ Reverse Voltage Per Segment 5 V Operating Temperature Range -35℃ to +85℃ Storage Temperature Range -35℃ to +85℃ Solder Temperature: max 260℃ for max 3sec at 1.6mm[1/16inch] below seating plane. ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta=25oC PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION Average Luminous Intensity IV 800 2200 cd IF=10mA Peak Emission Wavelength p 565 nm IF=20mA Spectral Line Half-Width  30 nm IF=20mA Dominant Wavelength d 569 nm IF=20mA Forward Voltage Per Segment VF 2.1 2.6 V IF=20mA Reverse Current Per Segment IR 100 A VR=5V Luminous Intensity Matching Ratio IV-m 2:1 IF=10mA Note: Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commision Internationale De L’Eclairage) eye-response curve.

LITE-ON ELECTRONICS, INC. Property of Lite-On Only PART NO.:LTS-4510AG PAGE: 5 of 5 BNS-OD-C131/A4 TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES (25oC Ambient Temperature Unless Otherwise Noted)