LTS-313AHR LITEON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto LED Display Product Data Sheet LTS-313AHR Spec No.: DS-30-96-184 Effective Date: 05/18/2010 Revision: B BNS-OD-FC001/A4 BNS-OD-FC001/A4 BNS-OD-FC001/A4 BNS-OD-FC001/A4

LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTS-313AHR PAGE: 1 of 5 BNS-OD-C131/A4

FEATURES

＊0.3 inch (7.62 mm) DIGIT HEIGHT. ＊CONTINUOUS UNIFORM SEGMENTS. ＊LOW POWER REQUIREMENT. ＊EXCELLENT CHARACTERS APPEARANCE. ＊HIGH BRIGHTNESS & HIGH CONTRAST. ＊WIDE VIEWING ANGLE. ＊SOLID STATE RELIABILITY. ＊CATEGORIZED FOR LUMINOUS INTENSITY.

DESCRIPTION

The LTS-313AHR is a 0.3 inch (7.62 mm) digit height single digit seven-segment display. This device utilizes high efficiency red LED chips, which are made from GaAsP on a transparent GaP substrate, and has a red face and red segments. DEVICE PART NO. DESCRIPTION Hi-Eff. Red Common Cathode Rt. Hand Decimal LTS-313AHR

LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTS-313AHR PAGE: 2 of 5 BNS-OD-C131/A4 PACKAGE DIMENSIONS NOTES: All dimensions are in millimeters. Tolerances are 0.25 mm (0.01“) unless otherwise noted. INTERNAL CIRCUIT DIAGRAM

LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTS-313AHR PAGE: 3 of 5 BNS-OD-C131/A4 PIN CONNECTION No. CONNECTION

1 COMMON CATHODE

2 ANODE F

3 ANODE G

4 ANODE E

5 ANODE D

6 COMMON CATHODE

7 ANODE D.P.

8 ANODE C

9 ANODE B

10 ANODE A

LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTS-313AHR PAGE: 4 of 5 BNS-OD-C131/A4 ABSOLUTE MAXIMUM RATING AT Ta=25oC PARAMETER MAXIMUM RATING UNIT Power Dissipation Per Segment 75 mW Peak Forward Current Per Segment ( 1/10 Duty Cycle, 0.1ms Pulse Width ) 100 mA Continuous Forward Current Per Segment Derating Linear From 25℃ Per Segment 0.33 mA mA/℃ Reverse Voltage Per Segment 5 V Operating Temperature Range -35℃ to +85℃ Storage Temperature Range -35℃ to +85℃ Solder Temperature: max 260℃ for max 3sec at 1.6mm below seating plane. ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta=25oC PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION Average Luminous Intensity IV 870 2000 cd IF=10mA Peak Emission Wavelength p 635 nm IF=20mA Spectral Line Half-Width  40 nm IF=20mA Dominant Wavelength d 623 nm IF=20mA Forward Voltage Per Segment VF 2 2.6 V IF=20mA Reverse Current Per Segment IR 100 A VR=5V Luminous Intensity Matching Ratio IV-m 2:1 IF=10mA Note: Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commision Internationale De L’Eclairage) eye-response curve.

LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTS-313AHR PAGE: 5 of 5 BNS-OD-C131/A4 TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES (25oC Ambient Temperature Unless Otherwise Noted)