LTS-10803TBE LITEON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto LED Display Product Data Sheet LTS-10803TBE Spec No.: DS30-2013-0068 Effective Date: 10/02/2013 Revision: A BNS-OD-FC001/A4 BNS-OD-FC001/A4 BNS-OD-FC001/A4 BNS-OD-FC001/A4

LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTS-10803TBE PAGE: 1 of 8 BNS-OD-C131/A4 LED DISPLAY LTS-10803TBE DATA SHEET ITEM DESCRIPTION ISSUER DATE - RDR original Spec. Lucas 02/23/2010 1 1.1 Add Liteon Spec. In Page 3

1.2 Add ESD Note In Page 7 Reo Lin 07/11/2013

2 Modify Symbol Location In Page 3 Reo Lin 09/30/2013

LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTS-10803TBE PAGE: 2 of 8 BNS-OD-C131/A4

FEATURES

＊1.0 inch (25.4-mm) DIGIT HEIGHT. ＊CONTINUOUS UNIFORM SEGMENTS. ＊LOW POWER REQUIREMENT. ＊EXCELLENT CHARACTERS APPEARANCE. ＊HIGH BRIGHTNESS & HIGH CONTRAST. ＊WIDE VIEWING ANGLE. ＊SOLID STATE RELIABILITY. ＊CATEGORIZED FOR LUMINOUS INTENSITY. ＊LEAD-FREE PACKAGE (ACCORDING TO ROHS)

DESCRIPTION

The LTS-10803TBE is a 1.0 inch ( 25.40mm) digit height single digit seven-segment display. This device utilizes Blue LED chips(InGaN epi on a Sapphire substrate), and has a gray face and white segments. DEVICE PART NO. DESCRIPTION InGaN Blue COMMON ANODE LTS-10803TBE

LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTS-10803TBE PAGE: 3 of 8 BNS-OD-C131/A4 PACKAGE DIMENSIONS 2. Pin tip’s shift tolerance is  0.4 mm. 3. Foreign material on segment ≦10mils 4. Ink contamination (surface) ≦20mils 5. Bending≦1% of reflector length 6. Bubble in segment ≦10mils 7. Recommend the best pcb hole : diameter 1.0mm

LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTS-10803TBE PAGE: 4 of 8 BNS-OD-C131/A4 INTERNAL CIRCUIT DIAGRAM

LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTS-10803TBE PAGE: 5 of 8 BNS-OD-C131/A4 PIN CONNECTION No. CONNECTION

1 CATHODE A

2 CATHODE H

3 CATHODE F

4 COMMON ANODE

5 CATHODE E

6 CATHODE D

7 CATHODE K

8 CATHODE C

9 CATHODE G1

10 CATHODE G2

11 CATHODE B

LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTS-10803TBE PAGE: 6 of 8 BNS-OD-C131/A4 ABSOLUTE MAXIMUM RATING AT Ta=25oC PARAMETER MAXIMUM RATING UNIT Power Dissipation Per Segment 140(70) mW Peak Forward Current Per Segment ( 1/10 Duty Cycle, 0.1ms Pulse Width ) 30 mA Continuous Forward Current Per Segment Derating Linear From 25℃ Per Segment 0.28 mA mA/℃ Operating Temperature Range -35℃ to +105℃ Storage Temperature Range -35℃ to +105℃ Solder Temperature: max 260℃ for max 3sec at 1.6mm[1/16inch] below seating plane. ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta=25oC PARAMETER SYMBO L MIN. TYP. MAX. UNIT TEST CONDITION Average Luminous Intensity IV 25168 cd IF=10mA Peak Emission Wavelength p 468 nm IF=20mA Spectral Line Half-Width  25 nm IF=20mA Dominant Wavelength d 470 nm IF=20mA Forward Voltage Per Segment VF 6.6(3.3) 7.6(3.8) V IF=20mA Reverse Current Per Segment(2) IR 100 A VR=5V Luminous Intensity Matching Ratio IV-m 2:1 IF=1mA Note: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE ( Commision Internationale De L‘Eclariage ) eye-response curve. 2. Reverse voltage is only for IR test, it can not continue to operate this situation. 3. Cross talk specification ≦ 2.5%

LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTS-10803TBE PAGE: 7 of 8 BNS-OD-C131/A4 ESD (Electrostatic Discharge) Static Electricity or power surge will damage the LED. Suggestions to prevent ESD damage:  Use of a conductive wrist band or anti-electrostatic glove when handling these LEDs.  All devices, equipment, and machinery must be properly grounded.  Work tables, storage racks, etc. should be properly grounded.  Use ion blower to neutralize the static charge which might have built up on surface of the LED’s plastic for N/D as a result of friction between LEDs during storage and handling.

LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTS-10803TBE PAGE: 8 of 8 BNS-OD-C131/A4 TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES (25oC Ambient Temperature Unless Otherwise Noted)