LTS-10101TBE LITEON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto LED Display Product Data Sheet LTS-10101TBE Spec No.: DS30-2010-0161 Effective Date: 07/20/2013 Revision: A BNS-OD-FC001/A4 BNS-OD-FC001/A4 BNS-OD-FC001/A4 BNS-OD-FC001/A4
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTS-10101TBE PAGE: 1 of 5 BNS-OD-C131/A4
FEATURES
＊1.0 inch (25.40 mm) DIGIT HEIGHT. ＊CONTINUOUS UNIFORM SEGMENTS. ＊LOW POWER REQUIREMENT. ＊EXCELLENT CHARACTERS APPEARANCE. ＊HIGH BRIGHTNESS & HIGH CONTRAST. ＊WIDE VIEWING ANGLE. ＊SOLID STATE RELIABILITY. ＊CATEGORIZED FOR LUMINOUS INTENSITY. ＊LEAD-FREE PACKAGE (ACCORDING TO ROHS)
DESCRIPTION
The LTS-10101TBE is a 1.0 inch (25.40mm) digit height single digit seven-segment display. This device utilizes InGaN blue chips, which are made from InGaN on Sapphire substrate, and has a gray face and white segments. DEVICE PART NO. DESCRIPTION InGaN Blue UNIVERSAL LTS-10101TBE
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTS-10101TBE PAGE: 2 of 5 BNS-OD-C131/A4 PACKAGE DIMENSIONS 2. Pin tip’s shift tolerance is + 0.4 mm. INTERNAL CIRCUIT DIAGRAM
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTS-10101TBE PAGE: 3 of 5 BNS-OD-C131/A4 PIN CONNECTION No. CONNECTION
1 ANODE A,D
2 ANODE E
3 ANODE B,C
4 CATHODE B,C
5 CATHODE E
6 CATHODE A,D
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTS-10101TBE PAGE: 4 of 5 BNS-OD-C131/A4 ABSOLUTE MAXIMUM RATING AT Ta=25oC PARAMETER MAXIMUM RATING UNIT Power Dissipation Per Chip 334 mW Peak Forward Current Per Chip ( 1/10 Duty Cycle, 0.1ms Pulse Width ) 100 mA Continuous Forward Current Per Chip 20 mA Derating Linear From 25℃ Per Chip 0.22 mA/℃ Operating Temperature Range -35℃ to +85℃ Storage Temperature Range -35℃ to +85℃ Solder Temperature: max 260℃ for max 3sec at 1.6mm[1/16inch] below seating plane. ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta=25oC PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION Average Luminous Intensity Per Segment IV 17.4 54.9 mcd IF=10mA Peak Emission Wavelength p 468 nm IF=20mA Spectral Line Half-Width 25 nm IF=20mA Dominant Wavelength d 470 nm IF=20mA Forward Voltage Per Segment VF 13.2 14.4 V IF=20mA Reverse Current Per Segment IR 100 A VR=5V Luminous Intensity Matching Ratio IV-m 2:1 IF=1mA Note: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commision Internationale De L’Eclairage) eye-response curve. 2. Reverse voltage is only for IR test. It can not continue to operate at this situation. ESD (Electrostatic Discharge) Static Electricity or power surge will damage the LED. Suggestions to prevent ESD damage: Use of a conductive wrist band or anti-electrostatic glove when handling these LEDs. All devices, equipment, and machinery must be properly grounded. Work tables, storage racks, etc. should be properly grounded. Use ion blower to neutralize the static charge which might have built up on surface of the LED’s plastic lens as a result of friction between LEDs during storage and handling.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTS-10101TBE PAGE: 5 of 5 BNS-OD-C131/A4 TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES (25oC Ambient Temperature Unless Otherwise Noted)