LTPL-C034UVD365 LITEON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 15

Technical content

LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto Specific Lighting Product Data Sheet LTPL-C034UVD365 Spec No.: DS23-2016-0060 Effective Date: 07/15/2016 Revision: - BNS-OD-FC001/A4 BNS-OD-FC001/A4 BNS-OD-FC001/A4 BNS-OD-FC001/A4

Part No. : LTPL-C034UVD365 BNS-OD-FC002 /A4 Specific Lighting LTPL-C034UVD365 1. Description The LiteON C03 UV Product series is a revolutionary, energy efficient light source for UV curing and common UV application, combining the lifetime and reliability advantages of Light Emitting Diodes with the brightness of conventional light source. It gives you design freedom, and creating a new opportunities for solid state UV light source to displace conventional UV technologies

Features

 I.C. compatible  RoHS compliant and Pb free  Lower operating costs  Reduced maintenance costs 2. Outline Dimensions Notes : 1. All dimensions are in millimeters and dimension tolerances are ± 0.2mm except lens height and ceramic length / width dimension tolerance are ± 0.1mm 2. Thermal pad of the device is electrically neutral from the anode and cathode pads

Part No. : LTPL-C034UVD365 BNS-OD-FC002 /A4 Specific Lighting LTPL-C034UVD365 3. Absolute Maximum Ratings at Ta=25°C Parameter Symbol Rating Unit DC Forward Current If 500 mA Power Consumption Po 2 W Operating Temp Range Topr -40 ~ +85 °C Storage Temp Range Tstg -55 ~ +100 °C Junction Temperature Tj 90 °C Notes: Operating the LED under reverse bias condition long time might result in damage or failure of the component.

Part No. : LTPL-C034UVD365 BNS-OD-FC002 /A4 Specific Lighting LTPL-C034UVD365 4. Electro-Optical Characteristics at Ta=25° C Parameter Symbol Values Test Condition Unit Forward Voltage Vf Min. 2.8 If = 350mA V Typ. 4.0 Max. 4.4 Radiant Flux Φe Min. 320 If = 350mA mW Typ. 410 Max 500 Peak Wavelength Wp Min. 360 If = 350mA nm Max 370 Viewing Angle 2θ1/2 Typ. 130 If = 350mA ° Thermal Resistance Rthjc Typ 14.7 --- °C/W Notes: 1. Radiant flux (Φe) is the total Radiant flux output as measured with an integrating sphere. 2. Thermal resistance (Junction to case) measurement tolerance is ± 10%

Part No. : LTPL-C034UVD365 BNS-OD-FC002 /A4 Specific Lighting LTPL-C034UVD365 5. Bin Code List Vf : Forward Voltage Spec. Table Vf Bin Vf (V) @ If = 350mA Min. Max. V0 2.8 3.2 V1 3.2 3.6 V2 3.6 4.0 V3 4.0 4.4 Forward Voltage Tolerance: +/- 0.1 V Φe Radiant Flux Spec. Table Φe Bin Φe (mW) @ If = 350mA Min. Max. R1 320 350 R2 350 380 R3 380 410 R4 410 440 R5 440 470 R6 470 500 Radiant Flux Tolerance: +/- 10% Wp: Peak Wavelength Spec table Wp Bin Wp (nm) @ If = 350mA Min. Max. P3M 360 365 P3N 365 370 Peak Wavelength Tolerance: +/- 3nm Notes: 1. Bin classification code is marked on each packing bag. 2. If there is any special or limited bin request, please contact with LiteOn’s sales

Part No. : LTPL-C034UVD365 BNS-OD-FC002 /A4 Specific Lighting LTPL-C034UVD365 6. Typical Electrical / Optical Characteristics Curves (25C Ambient Temperature Unless Otherwise Noted) Fig 1. Relative Radiant Flux vs. Forward Current Fig 2. Relative Spectral Distribution

Part No. : LTPL-C034UVD365 BNS-OD-FC002 /A4 Specific Lighting LTPL-C034UVD365 Fig 3. Radiation Characteristics Fig 4. Forward Current vs. Forward Voltage

Part No. : LTPL-C034UVD365 BNS-OD-FC002 /A4 Specific Lighting LTPL-C034UVD365 Fig.5 Relative Radiant Flux vs Junction Temperature

Part No. : LTPL-C034UVD365 BNS-OD-FC002 /A4 Specific Lighting LTPL-C034UVD365 8. User Guide Suggested Reflow Soldering Characteristics Notes: 1. All temperatures refer to topside of the package, measured on the package body surface. 2. The soldering profile could be further referred to different soldering grease material characteristic. The grease vendor will provide this information. 3. A rapid-rate process is not recommended for the LEDs cooling down from the peak temperature. 4. Although the recommended reflow conditions are specified above, the reflow or hand soldering condition at the lowest possible temperature is desirable for the LEDs. 5. LiteOn cannot make a guarantee on the LEDs which have been already assembled usi ng the dip soldering method.

Part No. : LTPL-C034UVD365 BNS-OD-FC002 /A4 Specific Lighting LTPL-C034UVD365 Recommend Printed Circuit Board Attachment Pad Notes: 1. The LEDs can be soldered using the reflow soldering or hand soldering method. The recommended h and soldering condition is 300°C max. and 2secs max. only once, and the operation of reflow soldering is only up to three times at maximum. 2. All temperatures refer to topside of the package, measured on the package body surface. 3. The soldering profile could be further referred to different soldering grease material characteristic. The grease vendor will provide this information. 4. A rapid-rate process is not recommended for the LEDs cooling down from the peak temperature. 5. Although the recommended reflow condit ions are specified above, the reflow or hand soldering condition at the lowest possible temperature is desirable for the LEDs. 6. LiteOn cannot make a guarantee on the LEDs which have been already assembled using the dip soldering method.

Part No. : LTPL-C034UVD365 BNS-OD-FC002 /A4 Specific Lighting LTPL-C034UVD365 Package Dimensions of Tape Package Dimensions of Reel Notes: 1. Empty component pockets sealed with top cover tape. 2. 7 inch reel maximum 500 pcs per reel. 3. Minimum packing quantity is 100 pieces for remainders. 4. The maximum number of consecutive missing lamps is two. 5. In accordance with EIA-481-1-B specifications.

Part No. : LTPL-C034UVD365 BNS-OD-FC002 /A4 Specific Lighting LTPL-C034UVD365 9. Cautions Cleaning Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED if necessary. Do not use unspecified chemical liquid to clean LED, it could harm the package. Drive Method An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs connected in parallel in an application, it is recommended that a current limiting resistor be incorporated in the drive circuit, in series with each LED as shown in Circuit below. LE D LED Circuit model A Circuit model B (A) Recommended circuit. (B) The brightness of each LED might appear different due to the differences in the I -V characteristics of those LEDs. © This LED should be used under forward current, particularly not used under continuous reverse current to avoid the damage to LED. The electrode pads are plated with gold, but it is still not recommended to the use under any of the following conditions, please confirm the performance and reliability are well enough if you use it under any of the following conditions ・Do not use sulfur -containing materials in commercial products including the materials such as seals and adhesives that may contain sulfur. ・Do not put this product in a place with a lot of moisture (over 85% relative humidity), dew condensation, briny air, and corrosive gas (Cl, H2S, NH3, SO2, NOX, etc.). Manual Handling Remark The LED should only be picked up by making contact with the sides of the LED body. It should not put any pressure on the lens either by finger or any hand tool. Do not puncture or push the lens.

Part No. : LTPL-C034UVD365 BNS-OD-FC002 /A4 Specific Lighting LTPL-C034UVD365 ESD (Electrostatic Discharge) Static Electricity or power surge will damage the LED. Suggestions to prevent ESD damage: ・Use a conductive wrist band or anti-electrostatic glove when handling these LEDs. ・All devices, equipment, and machinery must be properly grounded. ・Work tables, storage racks, etc. should be properly grounded. ・Use ion blower to neutralize the static charge which might have built up on surface of the LED’s plastic lens as a result of friction between LEDs during storage and handling. ESD-damaged LEDs will exhibit abnormal characteristics such as high reverse leakage current, low forward voltage, or “no light up” at low currents. To verify for ESD damage, check for “light up” and V F of the suspect LEDs at low currents. The VF of “good” LEDs should be > 2.0V@0.5mA. Training and Certification 1. Working area is ESD-certified. 2. Training records and re-certification dates monitored. Static-Safe Workstation & Work Areas 1. Static-safe working stations or work-areas have ESD signs. 2. All surfaces and objects at all static-safe workstation and within 1 ft measure less than 100V. 3. All ionizer activated, positioned towards the units. 4. Each work surface mats grounding is good. Personnel Grounding 1. Every person (including visitors) handling ESD sensitive (ESDS) items wear wrist strap, heel strap or conductive shoes with conductive flooring. 2. If conductive footwear used, conductive flooring also present. 3. Garments, hairs or anything closer than 1 ft to ESD items measure less than 100V. 4. The wrist strap or heel strap/conductive shoes are checked daily and result recorded. 5. All wrist strap or heel strap checkers calibration up to date. Device Handling 1. Each ESDS items identified by EIA-471 labels on item or packaging.. 2. No static charge generators (e.g. plastics) inside shielding containers with ESDS items. 3. All flexible conductive and dissipative package materials are inspected before reuse or recycles

Part No. : LTPL-C034UVD365 BNS-OD-FC002 /A4 Specific Lighting LTPL-C034UVD365 Storage This product is qualified as Moisture sensitive Level 3 per JEDEC J -STD-020 Precaution when handling this moisture sensitive product is important to ensure the reliability of the product. The package is sealed: The LEDs should be stored at 30°C or less and 85%RH or less. And the LEDs are limited to use within one year, while the LEDs is packed in moisture-proof package with the desiccants inside. The package is opened: The LEDs should be stored at 30°C or less and 60%RH or less. The LEDs are limited to solder process within 168hrs. If the Humidity Indicator shows the pink color in 10% even higher or exceed the storage limiting time since opened, we recommended to baking LEDs at 60 °C at least 24hours before solder. To seal the remainder LEDs return to package, it’s recommended to be with workable desiccants in original package. Safety Do NOT directly look at the UV light from LED or optical instrument because it is harmful to human eyes. And it is recommended to use UV goggles protective glasses for avoiding eye damage.

Part No. : LTPL-C034UVD365 BNS-OD-FC002 /A4 Specific Lighting LTPL-C034UVD365 10. Datasheet Version: Version Date Owner Change Item 1 2016/06/21 ChunChieh Preliminary specification