LTL-1CHEE-011A LITEON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto Through Hole Lamp Product Data Sheet LTL-1CHEE-011A Spec No.: DS-20-98-0345 Effective Date: 03/22/2000 Revision: - BNS-OD-FC001/A4 BNS-OD-FC001/A4 BNS-OD-FC001/A4 BNS-OD-FC001/A4

L I T E - O N E L E C T R O N I C S , I N C . P r o p e r t y o f L i t e- O n O n l y

Features

  • Low power consumption. * High efficiency. * Versatile mounting on P.C. board or panel. * I.C. compatible/low current requirement. * 3.1 mm diameter package. Package Dimensions Part No. Lens Source Color LTL-1CHEE-011A Red Transparent Hi-Eff.Red NOTES: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25mm(.010") unless otherwise noted. 3. Protruded resin under flange is 1.0mm(.04") max. 4. Lead spacing is measured where the leads emerge from the package. 5. Specifications are subject to change without notice. Part No. : LTL-1CHEE-011A Page : 1 of 5 BNS-OD-C131/A4

L I T E - O N E L E C T R O N I C S , I N C . P r o p e r t y o f L i t e- O n O n l y Absolute Maximum Ratings at TA=25℃ Parameter Maximum Rating Unit Power Dissipation 100 mW Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) 120 mA Continuous Forward Current 30 mA Derating Linear From 50℃ 0.4 mA/℃ Reverse Voltage 5 V Operating Temperature Range -55℃ to + 100℃ Storage Temperature Range -55℃ to + 100℃ Lead Soldering Temperature [1.6mm(.063") From Body] 260℃ for 5 Seconds Part No. : LTL-1CHEE-011A Page : 2 of 5 BNS-OD-C131/A4

L I T E - O N E L E C T R O N I C S , I N C . P r o p e r t y o f L i t e- O n O n l y Electrical Optical Characteristics at TA=25℃ Parameter Symbol Min. Typ. Max. Unit Test Condition Luminous Intensity IV 5.6 19 mcd IF = 10mA Note 1,4 Viewing Angle 2θ1/2 45 deg Note 2 (Fig.6) Peak Emission Wavelength λP 635 nm Measurement @Peak (Fig.1) Dominant Wavelength λd 623 nm Note 3 Spectral Line Half-Width Δλ 40 nm Forward Voltage VF 2.0 2.6 V IF = 20mA Reverse Current IR 100 μA VR = 5V Capacitance C 20 pF VF = 0 , f = 1MHz Note: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commission International De L'Eclairage) eye-response curve. 2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 4. The Iv guarantee should be added ±15% . Part No. : LTL-1CHEE-011A Page : 3 of 5 BNS-OD-C131/A4

L I T E - O N E L E C T R O N I C S , I N C . P r o p e r t y o f L i t e- O n O n l y Typical Electrical / Optical Characteristics Curves (25℃ Ambient Temperature Unless Otherwise Noted) Part No. : LTL-1CHEE-011A Page : 4 of 5 BNS-OD-C131/A4

L I T E - O N E L E C T R O N I C S , I N C . P r o p e r t y o f L i t e- O n O n l y

  • Compatible with radial lead automatic insertion equipment. * Most radial lead plastic lead lamps available packaged in tape and folding. * 5mm (0.197") formed lead and 2.54mm (0.1") straight lead spacing available. * Folding packaging simplifies handling and testing. Package Dimensions Specification Item Symbol Minimum Maximum mm inch mm inch Tape Feed Hole Diameter D 3.8 0.149 4.2 0.165 Component Lead Pitch F 4.8 0.188 5.8 0.228 Front to Rear Deflection △H -- -- 2.0 0.078 Height of Seating Plane H 15.5 0.610 16.5 0.649 Feed Hole to Bottom of Component H1 19.0 0.748 21.0 0.827 Feed Hole to Overall Component Height H2 23.9 0.940 26.5 1.043 Lead Length After Component Height L W0 11.0 0.433 Feed Hole Pitch P 12.4 0.488 13.0 0.511 Lead Location P1 3.15 0.124 4.55 0.179 Center of Component Location P2 5.05 0.198 7.65 0.301 Total Taped Thickness T -- -- 0.90 0.035 Feed Hole Location W0 8.5 0.334 9.75 0.384 Adhesive Tape Width W1 12.5 0.492 13.5 0.531 Adhesive Tape Position W2 0 0 3.0 0.118 Tape Width W3 17.5 0.689 19.0 0.748 Part No. : LTL-1CHEE-011A Page : 5 of 5 BNS-OD-C131/A4