LTL-14CDJN LITEON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto Through Hole Lamp Product Data Sheet LTL-14CDJN Spec No.: DS-20-98-0334 Effective Date: 08/22/2001 Revision: A BNS-OD-FC001/A4 BNS-OD-FC001/A4 BNS-OD-FC001/A4 BNS-OD-FC001/A4

L I T E - O N E L E C T R O N I C S , I N C . P r o p e r t y o f L i t e- O n O n l y

Features

  • Yellow and Green chips are matched for uniform light output. * T-1 type package. * Long life solid state reliability. * Low power consumption. * I.C. compatible. Package Dimensions Part No. Lens Source Color LTL-14CDJN White Diffused Yellow / Green Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25mm(.010") unless otherwise noted. 3. Protruded resin under flange is 1.0mm(.04") max. 4. Lead spacing is measured where the leads emerge from the package. 5. Specifications are subject to change without notice. Part No. : LTL-14CDJN Page : 1 of 4 BNS-OD-C131/A4

L I T E - O N E L E C T R O N I C S , I N C . P r o p e r t y o f L i t e- O n O n l y Absolute Maximum Ratings at TA=25℃ Parameter Yellow Green Unit Power Dissipation 60 100 mW Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) 80 120 mA Continuous Forward Current 20 30 mA Derating Linear From 50℃ 0.25 0.4 mA/℃ Operating Temperature Range -55℃ to + 100℃ Storage Temperature Range -55℃ to + 100℃ Lead Soldering Temperature [1.6mm(.063") From Body] 260℃ for 5 Seconds Part No. : LTL-14CDJN Page : 2 of 4 BNS-OD-C131/A4

L I T E - O N E L E C T R O N I C S , I N C . P r o p e r t y o f L i t e- O n O n l y Electrical / Optical Characteristics at TA=25℃ Parameter Symbol Color Min. Typ. Max. Unit Test Condition Luminous Intensity Iv Yellow Green 2.5 3.7 8.7 12.6 mcd IF = 20mA IF = 20mA Note 1,4 Viewing Angle 2θ1/2 Yellow Green deg Note 2 (Fig.6) Peak Emission Wavelength λp Yellow Green 585 565 nm Measurement @Peak (Fig.1) Dominant Wavelength λd Yellow Green 588 569 nm Note 3 Spectral Line Half-Width Δλ Yellow Green nm Forward Voltage VF Yellow Green 2.1 2.1 2.6 2.6 V IF = 20mA Reverse Current IR Yellow Green 100 μA VR = 5V Note 5 Capacitance C Yellow Green pF VF = 0 , f = 1MHz Note: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commission International De L'Eclairage) eye-response curve. 2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 4. The Iv guarantee should be added ±15%. 5. Reverse current is controlled by dice source. Part No. : LTL-14CDJN Page : 3 of 4 BNS-OD-C131/A4

L I T E - O N E L E C T R O N I C S , I N C . P r o p e r t y o f L i t e- O n O n l y Typical Electrical / Optical Characteristics Curves (25℃ Ambient Temperature Unless Otherwise Noted) Part No. : LTL-14CDJN Page : 4 of 4 BNS-OD-C131/A4