LTE-C9306 LITEON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto IR Emitter and Detector Product Data Sheet LTE-C9306 Spec No.: DS50-2007-0010 Effective Date: 04/20/2007 Revision: - BNS-OD-FC001/A4 BNS-OD-FC001/A4 BNS-OD-FC001/A4 BNS-OD-FC001/A4

LITE-ON TECHNOLOGY CORPORATION. P r o p e r t y o f L i t e- O n O n l y

FEATURES

  • MEET ROHS, GREEN PRODUCT. * PACKAGE IN 8MM TAPE ON 7" DIAMETER REELS. * COMPATIBLE WITH INFRARED AND SOLDER PROCESS. * EIA STD PACKAGE. PACKAGE DIMENSIONS NOTES: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.1 mm (.004") unless otherwise noted. 3. Specifications are subject to change without notice. Part No. : LTE-C9306 DATA SHEET Page : 1 of 7 BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION. P r o p e r t y o f L i t e- O n O n l y ABSOLUTE MAXIMUM RATINGS AT TA=25℃ PARAMETER MAXIMUM RATING UNIT Power Dissipation 75 mW Peak Forward Current (300pps, 10μs pulse) 500 mA Continuous Forward Current 50 mA Reverse Voltage 5 V Operating Temperature Range -25℃ to + 85℃ Storage Temperature Range -55℃ to + 85℃ Wave Soldering Condition 260℃ for 5 Seconds Infrared Reflow Condition 260℃ for 5 Seconds Suggestion IR Reflow Profile For Pb Free Process Recom m ended Profile Betw een Assem ble And H eat-Resistance Line The Profile is available that m ust to use SnAg Cu solder paste Part No. : LTE-C9306 DATA SHEET Page : 2 of 7 BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION. P r o p e r t y o f L i t e- O n O n l y BNS-OD-C131/A4 ELECTRICAL / OPTICAL CHARACTERISTICS AT TA=25℃ PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION Radiant Intensity IE 4 9 - mW/sr IF = 20mA Radiant Intensity IE 10 22.5 - mW/sr IF = 50mA Peak Emission Wavelength λPeak - 850 - nm IF = 20mA Spectral Line Half-Width Δλ - 50 - nm IF = 20mA Forward Voltage VF 1.3 1.45 1.65 V IF = 20mA Reverse Current IR - - 10 μA VR = 5V Rise/Fall Time Tr/Tf - 30 - nS 10%~90%, IF = 20mA Viewing Angle (See FIG.6) 2θ1/2 - 20 - deg. Part No. : LTE-C9306 DATA SHEET Page : 3 of 7

LITE-ON TECHNOLOGY CORPORATION. P r o p e r t y o f L i t e- O n O n l y TYPICAL ELECTRICAL / OPTICAL CHARACTERISTICS CURVES (25℃ Ambient Temperature Unless Otherwise Noted) Fow ard C urrent (m A) FIG .5 R E LA TIV E R A D IAN T IN TEN SITY V S. FO R W A R D C U R R EN T FIG .6 R A D IA TIO N D IAG R AM Forw ard Voltage (V) FIG .3 FO R W A R D C U R R EN T VS. FO R W A R D V O LTA G E FIG .4 R E LA TIV E R A D IAN T IN TEN SITY V S. A M B IE N T TEM PE R A TU R E W avelength (nm ) FIG .1 S P E C TR A L D ISTR IBU TIO N Forw ard C urrent (m A)O utput Pow er R elative To Value at IF=20m A R elative R adiant Intensity 100 0 20 40 60 80 100 10.0 8.0 6.0 4.0 2.0 0.7 0.8 0.9 1.0 0.5 1.0 950850750 Forw ard C urrent IF (m A) FIG .2 FO R W A R D C U R R EN T VS. A M B IE N T TEM PE R A TU R E R elative R adiant Intensity Value at IF=20m A O utput Pow er R elative To 0 2010 oo o o o o o o o o 0-25 0.6 0.2 0.4 0.8 1.0 1.2 85604020 Am bient Tem perature Ta ( C ) o Am bient Tem perature Ta ( C ) o 80-25 20-20 0 40 60 100 Part No. : LTE-C9306 DATA SHEET Page : 4 of 7 BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION. P r o p e r t y o f L i t e- O n O n l y CLEANING: Do not use unspecified chemical liquid to clean LED they could harm the package. If clean is necessary, immerse the LED in ethyl alcohol or in isopropyl alcohol at normal temperature for less one minute. SUGGEST SOLDERING PAD DIMENSIONS PACKAGE DIMENSIONS OF TAPE AND REEL NOTES: 1. All dimensions are in millimeters (inches). Part No. : LTE-C9306 DATA SHEET Page : 5 of 7 BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION. P r o p e r t y o f L i t e- O n O n l y NOTES: 1. Empty component pockets sealed with top cover tape. 2. 7 inch reel- 1500 pieces per reel. 3. Minimum packing quantity is 500 pcs for remainders. 4. The maximum number of consecutive missing parts is two. 5. In accordance with ANSI/EIA 481-1-A-1994 specifications. Part No. : LTE-C9306 DATA SHEET Page : 6 of 7 BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION. P r o p e r t y o f L i t e- O n O n l y Part No. : LTE-C9306 DATA SHEET Page : 7 of 7 BNS-OD-C131/A4 CAUTIONS 1. APPLICATION The LEDs described here are intended to be used for ordinary electronic equipment (such as office equipment, communication equipment and household applications).Consult Liteon’s Sales in advance for information on applications in which exceptional reliability is required, particularly when the failure or malfunction of the LEDs may directly jeopardize life or health (such as in aviation, transportation, traffic control equipment, medical and life support systems and safety devices). 2. STORAGE The storage ambient for the LEDs should not exceed 30°C temperature or 70% relative humidity. It is recommended that LEDs out of their original packaging are IR-reflowed within one week. For extended storage out of their original packaging, it is recommended that the LEDs be stored in a sealed container with appropriate desiccant, or in a desiccators with nitrogen ambient. LEDs stored out of their original packaging for more than a week should be baked at about 60 deg C for at least 24 hours before solder assembly. 3. CLEANING Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED if necessary. 4. SOLDERING Recommended soldering conditions: Reflow soldering Wave Soldering Soldering iron Pre-heat Pre-heat time Peak temperature Soldering time 120~150°C 120 sec. Max. 240°C Max. 10 sec. Max. Pre-heat Pre-heat time Solder wave Soldering time 100°C Max. 60 sec. Max. 260°C Max. 10 sec. Max. Temperature Soldering time 300°C Max. 3 sec. Max. (one time only) 5. DRIVE METHOD An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs connected in parallel in an application, it is recommended that a current limiting resistor be incorporated in the drive circuit, in series with each LED as shown in Circuit A below. Circuit model A Circuit model B LED LED (A) Recommended circuit. (B) The brightness of each LED might appear different due to the differences in the I-V characteristics of those LEDs. 6. OTHERS The appearance and specifications of the product may be modified for improvement without prior notice.