LTDL-TX12S01B LITEON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only
FEATURES
- High speed transmission 13.2 Mbps , NRZ code * Build-in LED driving circuit allows connecting directly to modulation IC for digital audio equipment. * Wide range of operating voltage from 3V to 5V * Same package as fiber optic receiving module LTDL-RX16S01B
APPLICATIONS
- Digital audio system * CD, MD & DVD players PACKAGE DIMENSIONS NOTES: 1. All dimensions are in millimeters (inches). 2. Tolerance is Ô0.3 mm (.012") unless otherwise noted. 3. In the absence of comfrimation by device data sheets. LITE-ON takes no respondibility for any defects that may occur in equipment using any devices shown in catalogs, data book. etc. Contant LITE-ON in order to obtain the latest device data sheets before using any LITE-ON device. Part No. : LTDL-TX12S01B DATA SHEET Page : 1 of 7 BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only ELECTROÑOPTICAL CHARACTERISTICS ABSOLUTE MAXIMUM RATINGS AT TA=25Ċ PARAMETER MAXIMUM RATING UNIT Supply Voltage (V DD) -0.5 ~ +7 V Input Voltage (V IN) -0.5 ~ V DD +0.5 V Operating Temperature Range -20 Ċ to +70 Ċ Storage Temperature Range -30 Ċ to +80 Ċ Lead Soldering Temperature [1.6mm(.063") From Body] 260Ċ for 5 Seconds ± The shutter may not recover completely after duration or when it was used in high temperature enviroment. ELECTRICAL OPTICAL CHARACTERISTICS AT TA=25Ċ PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION Data Rate Ts Ñ Ñ 13.2 Mbps NRZ code Operating Voltage V DD 2.75 Ñ 5.25 V Peak Emission Wavelength ǃPeak 630 650 690 nm Fiber Coupling Light Output 1D -21 -17 -15 dBm *1 Current Consumption I DD Ñ 6 8 mA High Level Input Voltage V IH 2 Ñ Ñ V Low Level Input Voltage V IL Ñ Ñ 0.8 V “Low ÆHigh”propagation delay time tPLH Ñ Ñ 166 ns “High ÆLow”propagation delay time tPHL Ñ Ñ 155 ns Pulse Width Distortion ƤtW -18 Ñ +18 ns Jitter Ƥtj Ñ 1 18 ns *2 Part No. : LTDL-TX12S01B DATA SHEET Page : 2 of 6
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only *1 Measuring method of optical output coupling power *2 Power dissipation measuring method GNDVDDVIN 0.1uF + - DDV DDI A LTDL-TX12Sxx Part No. : LTDL-TX12S01B DATA SHEET Page : 4 of 6 BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only *3 Measuring pulse response Notej (1)The impedance of the probe for the oscilloscope must be more than 1MΩ and less than 10pf. Part No. : LTDL-TX12S01B DATA SHEET Page : 4 of 6 BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Rise and Fall Times and Pulse Width Distortion Input Signal Output Signal VOH VOL tr tPLH tPHL tf 90% 50% 10% 50% Pulse Width Distortion= tw = t -tPHL PLH Jitter 50% 50% Input Signal Output Signal t jt j Part No. : LTDL-TX12S01B DATA SHEET Page : 6 of 6 BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Notice z The circuit application examples in this publication are provided to explain representative applications of LITE-ON devices and are not intended to guarantee any circuit design or license any intellectual property rights. LITE-ON takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of LITE-ON devices. z Contact LITE-ON in order to obtain the latest device data sheets before using any LITE-ON device. LITE-ON reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. Manufacturing locations are also subject to change without notice. z Observe the following points when using any devices in this publication. LITE-ON takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used specified in the relevant data sheet nor meet the following conditionsj ( i ) The devices in this publication are designed for use in general electronic equipment designs such asj --- Personal computers --- Office automation equipment --- Telecommunication equipmentterminal --- Test and measurement equipment --- Industrial control --- Audio visual equipment --- Consumer electronics ( ii ) Measure such as fail-safe function and redundant design should be taken to ensure reliability and safety when LITE-ON device are used for or in connection with equipment that requires higher reliability such asj --- Transportation control and safety equipmenti.e., aircraft, train, automobiles, ect. --- Traffic signals --- Gas leakage sensor breakers --- Alarm equipment --- Various safety devices, etc. ( iii ) LITE-ON devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such asj --- Space applications --- Telecommunication equipmenttrunk lines --- Nuclear power control equipment --- Medical and other life support equipmente.g., scuba z If the LITE-ON devices listed in this publication fall within the scope of strategic products described in the Foreign Exchange and Foreign Trade Law of Republic of China , it is necessary to obtain approval to export such LITE-ON devices. z This publication is the proprietary product of LITE-ON and is copyrighted, with all rights reserved. Under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of LITE-ON. Express written permission is also required before any use of this publication may be made by a third party. z Contact and consult with a LITE-ON representative if there are any questions about the contents of this publication. Part No. : LTDL-TX12S01B DATA SHEET Page : 7 of 6 BNS-OD-C131/A4