LTD-2404SW-P LITEON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 14
Technical content
LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto LED Display Product Data Sheet LTD-2404SW-P Spec No.: DS30-2012-0095 Effective Date: 02/22/2013 Revision: A BNS-OD-FC001/A4 BNS-OD-FC001/A4 BNS-OD-FC001/A4 BNS-OD-FC001/A4
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTD-2404SW-P PAGE: 1 of 13 BNS-OD-C131/A4 LED DISPLAY LTD-2404SW-P DATA SHEET ITEM Description By DATE
1 New Spec Reo Lin 2012/08/31
2 2.1 Modify Package Dimensions In Page 3
2.2 Add Packing Drawing In Page 11 Reo Lin 2012/10/03
3 Modify plastic’s burr spec. from 0.14 mm to 0.05 mm in Page 3 Reo Lin 2012/12/26
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTD-2404SW-P PAGE: 2 of 13 BNS-OD-C131/A4
FEATURES
＊0.2 inch (5.08 mm) DIGIT HEIGHT ＊CONTINUOUS UNIFORM SEGMENTS ＊LOW POWER REQUIREMENT ＊EXCELLENT CHARACTERS APPEARANCE ＊HIGH BRIGHTNESS & HIGH CONTRAST ＊WIDE VIEWING ANGLE ＊SOLID STATE RELIABILITY ＊CATEGORIZED FOR LUMINOUS INTENSITY ＊SMD DISPLAY ＊LEAD FREE PACKAGE (ACCORDING TO ROHS)
DESCRIPTION
The LTD-2404SW-P is a 0. 2 inch (5.08 mm) digit height daul digit SMD display. This device uses InGaN White LED chips (InGaN on a transparent substrate) and has a gray face and white segments. DEVICE PART NO. DESCRIPTION InGaN White Common Anode Rt. Hand Decimal LTD-2404SW-P
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTD-2404SW-P PAGE: 3 of 13 BNS-OD-C131/A4 PACKAGE DIMENSIONS 10 1 2011 Solder Pad Vs Painting Diagram R eflector P C B S older P ad P ainting P lastic burr 0.05m m M ax C u 1200μ inch M in N i 150μ inch M in A u 4μ inch P ainting 400 μ inch S cale: 5:1 0.05m m NOTES: 1. Plastic pins’ burr max. 0.05mm 3. Solder pad materials and thickness: Cu: 1200μinch Ni: Min 150 μinch Au: 4 μinch
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTD-2404SW-P PAGE: 4 of 13 BNS-OD-C131/A4 INTERNAL CIRCUIT DIAGRAM
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTD-2404SW-P PAGE: 5 of 13 BNS-OD-C131/A4 PIN CONNECTION No. CONNECTION
1 CATHODE E 1
2 CATHODE D 1
3 COMMON ANODE DIG1
4 CATHODE C 1
5 CATHODE D P1
6 CATHODE E2
7 CATHODE D2
8 COMMON ANODE DIG2
9 CATHODE C2
10 CATHODE DP2
11 CATHODE B2
12 CATHODE A2
13 COMMON ANODE DIG2
14 CATHODE F2
15 CATHODE G2
16 CATHODE B1
17 CATHODE A1
18 COMMON ANODE DIG1
19 CATHODE F1
20 CATHODE G2
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTD-2404SW-P PAGE: 6 of 13 BNS-OD-C131/A4 CHIP LED ABSOLUTE MAXIMUM RATING PARAMETER MAXIMUM RATING UNIT Power Dissipation Per Segment 35 mW Peak Forward Current Per Segment ( Frequency 1Khz, 10% duty cycle) 50 mA Continuous Forward Current Per Segment 10 mA Forward Current Derating from 250C 0.28 mA/°C Operating Temperature Range -20°C to +80°C Storage Temperature Range -40°C to +85°C Soldering Conditions: 1/16 inch below seating plane for 3 seconds at 2600C. CHIP LED ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta=25oC PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION Average Luminous Intensity IV 45 180 mcd IF = 5mA Note 1, 2, 5 Viewing Angle 2θ1/2 130 deg Fig.6 Chromaticity Coordinates x 0.294 IF = 5mA Note 3, 5 Fig.1 y 0.286 Forward Voltage Per Segment VF 2.55 3.15 V IF = 5mA Reverse Current Per Segment(7) IR 100 A VR=5V Luminous Intensity Matching Ratio (Similar Light Area) IV-m 2:1 IF=5mA Note : 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. 2. Iv classification code is marked on each packing bag. 3. The chromaticity coordinates (x, y) is derived from the 1931 CIE chromaticity diagram. 4. Caution in ESD: Static Electricity and surge damages the LED. It is recommend to use a wrist band or anti-electrostatic glove when handling the LED. All devices, equipment and machinery must be properly grounded. 5. Tester:
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTD-2404SW-P PAGE: 7 of 13 BNS-OD-C131/A4 CAS140B is for the chromaticity coordinates (x, y) and Iv. 6. The chromaticity coordinates (x, y) guarantee should be added ± 0.01 tolerance 7. Reverse voltage is only for IR test. It can not continue to operate at this situation.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTD-2404SW-P PAGE: 8 of 13 BNS-OD-C131/A4 TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES (25oC Ambient Temperature Unless Otherwise Noted)
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTD-2404SW-P PAGE: 9 of 13 BNS-OD-C131/A4 Bin Code List VF Spec. Table VF Bin Forward Voltage (V) at IF = 5mA Min. Max. V1 2.55 2.65 V2 2.65 2.75 V3 2.75 2.85 V4 2.85 2.95 V5 2.95 3.05 V6 3.05 3.15 Tolerance on each Forward Voltage bin is +/-0.05 volt IV Spec. Table IV Bin Luminous Intensity (mcd) at IF = 5mA Min. Max. P 45.0 71.0 Q 71.0 112.0 R 112.0 180.0 Tolerance on each Luminous Intensity bin is +/- 15%. Hue Spec. Table Hue Bin Color bin limits at IF = 5mA CIE 1931Chromaticity coordinates S1 x 0.274 0.274 0.294 0.294 y 0.226 0.258 0.286 0.254 S2 x 0.274 0.274 0.294 0.294 y 0.258 0.291 0.319 0.286 S3 x 0.294 0.294 0.314 0.314 y 0.254 0.286 0.315 0.282 S4 x 0.294 0.294 0.314 0.314 y 0.286 0.319 0.347 0.315 S5 x 0.314 0.314 0.334 0.334 y 0.282 0.315 0.343 0.311 S6 x 0.314 0.314 0.334 0.334 y 0.315 0.347 0.376 0.343 Tolerance on each Hue (x, y) bin is +/- 0.01.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTD-2404SW-P PAGE: 10 of 13 BNS-OD-C131/A4 SMT SOLDERING INSTRUCTION (Number of reflow process shall be less than 2 times, and cooling process to normal temperature is required between the first and the second soldering process) Note: 1. Recommended soldering condition: Reflow Soldering (Two times only) Soldering Iron (One time only) Pre-heat: Pre-heat time: Peak temperature: Soldering time: 120~150°C. 120sec. Max. 260°C Max. 5sec. Max. Temperature Soldering time 300°C Max. 3sec. Max. 2. Number of reflow process shall be less than 2 times, and cooling process to normal temperature is required between the first and the second soldering process.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTD-2404SW-P PAGE: 11 of 13 BNS-OD-C131/A4 RECOMMENDED SOLDERING PATTERN (UNIT: mm): PACKING DIMENSIONS: 1. 10 sprocket hole pitch cum ulative tolerance ± 0.20. 3. M aterial : B lack C onductive Polystyrene A lloy. 2. C arrier cam ber is w ithin 1 m m in 250 m m . 4. A ll dim ensions m eet EIA -481-D requirem ents. 6. Packing length per 22" reel : 50.5 M eters. 7. C om ponent load per 13" reel : 1000 pcs. 5. Thickness : 0.30± 0.05m m .
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTD-2404SW-P PAGE: 12 of 13 BNS-OD-C131/A4 CONFIGURATION OF TAPE REEL DIMENSIONS : PS 05 03 00 02 1112 101 784 330.0±2.0 100.0±0.5 29.4 -0.5 24.4 13.0 +0.5 -0.2 2.0 +0.5 120° 21.0±0.5
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PART NO.: LTD-2404SW-P PAGE: 13 of 13 BNS-OD-C131/A4 Moisture Proof Packaging All N/D SMD displays are shipped in moisture proof package. The displays should be stored at 30°C or less and 90% RH or less. Once the package opened, moisture absorption begins. Baking Conditions If the parts are not stored in dry conditions, they must be baked before reflow to prevent damage to the parts. Package Temperature Time In Reel 60oC ≧48hours In Bulk 100oC ≧4hours 125oC ≧2hours Baking should only be done once. UNITS IN A SEALED MOISTURE-PROOF PACKAGE PACKAGE IS OPENED (UNSEALED) ENVIRONMENT LESS THAN 30oC, AND LESS THAN 60% RH? PERFORM RECOMMENDED BAKING CONDITIONS BAKING IS NOT NECESSARY PACKAGE IS OPENED MORE THAN 1 WEEK DAYS? YES NO YES NO